This makes use of the new devm_regulator_get_enable_read_voltage()
function to reduce boilerplate code.
Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
---
drivers/iio/adc/ad7292.c | 40 ++++++++++------------------------------
1 file changed, 10 insertions(+), 30 deletions(-)
diff --git a/drivers/iio/adc/ad7292.c b/drivers/iio/adc/ad7292.c
index 6aadd14f459d..aad4b782a3d2 100644
--- a/drivers/iio/adc/ad7292.c
+++ b/drivers/iio/adc/ad7292.c
@@ -79,7 +79,6 @@ static const struct iio_chan_spec ad7292_channels_diff[] = {
struct ad7292_state {
struct spi_device *spi;
- struct regulator *reg;
unsigned short vref_mv;
__be16 d16 __aligned(IIO_DMA_MINALIGN);
@@ -250,13 +249,6 @@ static const struct iio_info ad7292_info = {
.read_raw = ad7292_read_raw,
};
-static void ad7292_regulator_disable(void *data)
-{
- struct ad7292_state *st = data;
-
- regulator_disable(st->reg);
-}
-
static int ad7292_probe(struct spi_device *spi)
{
struct ad7292_state *st;
@@ -277,29 +269,17 @@ static int ad7292_probe(struct spi_device *spi)
return -EINVAL;
}
- st->reg = devm_regulator_get_optional(&spi->dev, "vref");
- if (!IS_ERR(st->reg)) {
- ret = regulator_enable(st->reg);
- if (ret) {
- dev_err(&spi->dev,
- "Failed to enable external vref supply\n");
- return ret;
- }
-
- ret = devm_add_action_or_reset(&spi->dev,
- ad7292_regulator_disable, st);
- if (ret)
- return ret;
-
- ret = regulator_get_voltage(st->reg);
- if (ret < 0)
- return ret;
-
- st->vref_mv = ret / 1000;
- } else {
- /* Use the internal voltage reference. */
+ /*
+ * Use external reference from vref if present, otherwise use 1.25V
+ * internal reference.
+ */
+ ret = devm_regulator_get_enable_read_voltage(&spi->dev, "vref");
+ if (ret == -ENODEV)
st->vref_mv = 1250;
- }
+ else if (ret < 0)
+ return ret;
+ else
+ st->vref_mv = ret / 1000;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->modes = INDIO_DIRECT_MODE;
--
2.45.1
