[PATCH v1 1/4] backlight: lm3533_bl: Remove the driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The driver has no in kernel users and requires a board file
to be instantiated. Remove basically a dead code.

If ever needed, it can be reinstantiated and converted to one
that uses firmware node interfaces.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/video/backlight/Kconfig     |  11 -
 drivers/video/backlight/Makefile    |   1 -
 drivers/video/backlight/lm3533_bl.c | 399 ----------------------------
 3 files changed, 411 deletions(-)
 delete mode 100644 drivers/video/backlight/lm3533_bl.c

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 230bca07b09d..91d6618d69a0 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -198,17 +198,6 @@ config BACKLIGHT_KTZ8866
 		Say Y to enable the backlight driver for the Kinetic KTZ8866
 		found in Xiaomi Mi Pad 5 series.
 
-config BACKLIGHT_LM3533
-	tristate "Backlight Driver for LM3533"
-	depends on MFD_LM3533
-	help
-	  Say Y to enable the backlight driver for National Semiconductor / TI
-	  LM3533 Lighting Power chips.
-
-	  The backlights can be controlled directly, through PWM input, or by
-	  the ambient-light-sensor interface. The chip supports 256 brightness
-	  levels.
-
 config BACKLIGHT_LOCOMO
 	tristate "Sharp LOCOMO LCD/Backlight Driver"
 	depends on SHARP_LOCOMO
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 8d2cb252042d..fc75b9f059f9 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO)	+= ipaq_micro_bl.o
 obj-$(CONFIG_BACKLIGHT_KTD253)		+= ktd253-backlight.o
 obj-$(CONFIG_BACKLIGHT_KTD2801)		+= ktd2801-backlight.o
 obj-$(CONFIG_BACKLIGHT_KTZ8866)		+= ktz8866.o
-obj-$(CONFIG_BACKLIGHT_LM3533)		+= lm3533_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3630A)		+= lm3630a_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3639)		+= lm3639_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)		+= locomolcd.o
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
deleted file mode 100644
index 3e10d480cb7f..000000000000
--- a/drivers/video/backlight/lm3533_bl.c
+++ /dev/null
@@ -1,399 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * lm3533-bl.c -- LM3533 Backlight driver
- *
- * Copyright (C) 2011-2012 Texas Instruments
- *
- * Author: Johan Hovold <jhovold@xxxxxxxxx>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <linux/slab.h>
-
-#include <linux/mfd/lm3533.h>
-
-
-#define LM3533_HVCTRLBANK_COUNT		2
-#define LM3533_BL_MAX_BRIGHTNESS	255
-
-#define LM3533_REG_CTRLBANK_AB_BCONF	0x1a
-
-
-struct lm3533_bl {
-	struct lm3533 *lm3533;
-	struct lm3533_ctrlbank cb;
-	struct backlight_device *bd;
-	int id;
-};
-
-
-static inline int lm3533_bl_get_ctrlbank_id(struct lm3533_bl *bl)
-{
-	return bl->id;
-}
-
-static int lm3533_bl_update_status(struct backlight_device *bd)
-{
-	struct lm3533_bl *bl = bl_get_data(bd);
-
-	return lm3533_ctrlbank_set_brightness(&bl->cb, backlight_get_brightness(bd));
-}
-
-static int lm3533_bl_get_brightness(struct backlight_device *bd)
-{
-	struct lm3533_bl *bl = bl_get_data(bd);
-	u8 val;
-	int ret;
-
-	ret = lm3533_ctrlbank_get_brightness(&bl->cb, &val);
-	if (ret)
-		return ret;
-
-	return val;
-}
-
-static const struct backlight_ops lm3533_bl_ops = {
-	.get_brightness	= lm3533_bl_get_brightness,
-	.update_status	= lm3533_bl_update_status,
-};
-
-static ssize_t show_id(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-
-	return scnprintf(buf, PAGE_SIZE, "%d\n", bl->id);
-}
-
-static ssize_t show_als_channel(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	unsigned channel = lm3533_bl_get_ctrlbank_id(bl);
-
-	return scnprintf(buf, PAGE_SIZE, "%u\n", channel);
-}
-
-static ssize_t show_als_en(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
-	u8 val;
-	u8 mask;
-	bool enable;
-	int ret;
-
-	ret = lm3533_read(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, &val);
-	if (ret)
-		return ret;
-
-	mask = 1 << (2 * ctrlbank);
-	enable = val & mask;
-
-	return scnprintf(buf, PAGE_SIZE, "%d\n", enable);
-}
-
-static ssize_t store_als_en(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t len)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
-	int enable;
-	u8 val;
-	u8 mask;
-	int ret;
-
-	if (kstrtoint(buf, 0, &enable))
-		return -EINVAL;
-
-	mask = 1 << (2 * ctrlbank);
-
-	if (enable)
-		val = mask;
-	else
-		val = 0;
-
-	ret = lm3533_update(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, val,
-									mask);
-	if (ret)
-		return ret;
-
-	return len;
-}
-
-static ssize_t show_linear(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	u8 val;
-	u8 mask;
-	int linear;
-	int ret;
-
-	ret = lm3533_read(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, &val);
-	if (ret)
-		return ret;
-
-	mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1);
-
-	if (val & mask)
-		linear = 1;
-	else
-		linear = 0;
-
-	return scnprintf(buf, PAGE_SIZE, "%x\n", linear);
-}
-
-static ssize_t store_linear(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t len)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	unsigned long linear;
-	u8 mask;
-	u8 val;
-	int ret;
-
-	if (kstrtoul(buf, 0, &linear))
-		return -EINVAL;
-
-	mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1);
-
-	if (linear)
-		val = mask;
-	else
-		val = 0;
-
-	ret = lm3533_update(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, val,
-									mask);
-	if (ret)
-		return ret;
-
-	return len;
-}
-
-static ssize_t show_pwm(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	u8 val;
-	int ret;
-
-	ret = lm3533_ctrlbank_get_pwm(&bl->cb, &val);
-	if (ret)
-		return ret;
-
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
-}
-
-static ssize_t store_pwm(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t len)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	u8 val;
-	int ret;
-
-	if (kstrtou8(buf, 0, &val))
-		return -EINVAL;
-
-	ret = lm3533_ctrlbank_set_pwm(&bl->cb, val);
-	if (ret)
-		return ret;
-
-	return len;
-}
-
-static LM3533_ATTR_RO(als_channel);
-static LM3533_ATTR_RW(als_en);
-static LM3533_ATTR_RO(id);
-static LM3533_ATTR_RW(linear);
-static LM3533_ATTR_RW(pwm);
-
-static struct attribute *lm3533_bl_attributes[] = {
-	&dev_attr_als_channel.attr,
-	&dev_attr_als_en.attr,
-	&dev_attr_id.attr,
-	&dev_attr_linear.attr,
-	&dev_attr_pwm.attr,
-	NULL,
-};
-
-static umode_t lm3533_bl_attr_is_visible(struct kobject *kobj,
-					     struct attribute *attr, int n)
-{
-	struct device *dev = kobj_to_dev(kobj);
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	umode_t mode = attr->mode;
-
-	if (attr == &dev_attr_als_channel.attr ||
-					attr == &dev_attr_als_en.attr) {
-		if (!bl->lm3533->have_als)
-			mode = 0;
-	}
-
-	return mode;
-};
-
-static struct attribute_group lm3533_bl_attribute_group = {
-	.is_visible	= lm3533_bl_attr_is_visible,
-	.attrs		= lm3533_bl_attributes
-};
-
-static int lm3533_bl_setup(struct lm3533_bl *bl,
-					struct lm3533_bl_platform_data *pdata)
-{
-	int ret;
-
-	ret = lm3533_ctrlbank_set_max_current(&bl->cb, pdata->max_current);
-	if (ret)
-		return ret;
-
-	return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm);
-}
-
-static int lm3533_bl_probe(struct platform_device *pdev)
-{
-	struct lm3533 *lm3533;
-	struct lm3533_bl_platform_data *pdata;
-	struct lm3533_bl *bl;
-	struct backlight_device *bd;
-	struct backlight_properties props;
-	int ret;
-
-	dev_dbg(&pdev->dev, "%s\n", __func__);
-
-	lm3533 = dev_get_drvdata(pdev->dev.parent);
-	if (!lm3533)
-		return -EINVAL;
-
-	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data\n");
-		return -EINVAL;
-	}
-
-	if (pdev->id < 0 || pdev->id >= LM3533_HVCTRLBANK_COUNT) {
-		dev_err(&pdev->dev, "illegal backlight id %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	bl = devm_kzalloc(&pdev->dev, sizeof(*bl), GFP_KERNEL);
-	if (!bl)
-		return -ENOMEM;
-
-	bl->lm3533 = lm3533;
-	bl->id = pdev->id;
-
-	bl->cb.lm3533 = lm3533;
-	bl->cb.id = lm3533_bl_get_ctrlbank_id(bl);
-	bl->cb.dev = NULL;			/* until registered */
-
-	memset(&props, 0, sizeof(props));
-	props.type = BACKLIGHT_RAW;
-	props.max_brightness = LM3533_BL_MAX_BRIGHTNESS;
-	props.brightness = pdata->default_brightness;
-	bd = devm_backlight_device_register(&pdev->dev, pdata->name,
-					pdev->dev.parent, bl, &lm3533_bl_ops,
-					&props);
-	if (IS_ERR(bd)) {
-		dev_err(&pdev->dev, "failed to register backlight device\n");
-		return PTR_ERR(bd);
-	}
-
-	bl->bd = bd;
-	bl->cb.dev = &bl->bd->dev;
-
-	platform_set_drvdata(pdev, bl);
-
-	ret = sysfs_create_group(&bd->dev.kobj, &lm3533_bl_attribute_group);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to create sysfs attributes\n");
-		return ret;
-	}
-
-	backlight_update_status(bd);
-
-	ret = lm3533_bl_setup(bl, pdata);
-	if (ret)
-		goto err_sysfs_remove;
-
-	ret = lm3533_ctrlbank_enable(&bl->cb);
-	if (ret)
-		goto err_sysfs_remove;
-
-	return 0;
-
-err_sysfs_remove:
-	sysfs_remove_group(&bd->dev.kobj, &lm3533_bl_attribute_group);
-
-	return ret;
-}
-
-static void lm3533_bl_remove(struct platform_device *pdev)
-{
-	struct lm3533_bl *bl = platform_get_drvdata(pdev);
-	struct backlight_device *bd = bl->bd;
-
-	dev_dbg(&bd->dev, "%s\n", __func__);
-
-	bd->props.power = FB_BLANK_POWERDOWN;
-	bd->props.brightness = 0;
-
-	lm3533_ctrlbank_disable(&bl->cb);
-	sysfs_remove_group(&bd->dev.kobj, &lm3533_bl_attribute_group);
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int lm3533_bl_suspend(struct device *dev)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "%s\n", __func__);
-
-	return lm3533_ctrlbank_disable(&bl->cb);
-}
-
-static int lm3533_bl_resume(struct device *dev)
-{
-	struct lm3533_bl *bl = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "%s\n", __func__);
-
-	return lm3533_ctrlbank_enable(&bl->cb);
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(lm3533_bl_pm_ops, lm3533_bl_suspend, lm3533_bl_resume);
-
-static void lm3533_bl_shutdown(struct platform_device *pdev)
-{
-	struct lm3533_bl *bl = platform_get_drvdata(pdev);
-
-	dev_dbg(&pdev->dev, "%s\n", __func__);
-
-	lm3533_ctrlbank_disable(&bl->cb);
-}
-
-static struct platform_driver lm3533_bl_driver = {
-	.driver = {
-		.name	= "lm3533-backlight",
-		.pm	= &lm3533_bl_pm_ops,
-	},
-	.probe		= lm3533_bl_probe,
-	.remove_new	= lm3533_bl_remove,
-	.shutdown	= lm3533_bl_shutdown,
-};
-module_platform_driver(lm3533_bl_driver);
-
-MODULE_AUTHOR("Johan Hovold <jhovold@xxxxxxxxx>");
-MODULE_DESCRIPTION("LM3533 Backlight driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:lm3533-backlight");
-- 
2.43.0.rc1.1336.g36b5255a03ac





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux