[PATCH v2 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation for ltc2664.

Co-developed-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
---
 .../bindings/iio/dac/adi,ltc2664.yaml         | 167 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 168 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
new file mode 100644
index 000000000000..517a96808ee0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2664.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2664 DAC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@xxxxxxxxxx>
+  - Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
+
+description: |
+  Analog Devices LTC2664 4 channel, 16 bit, +-10V DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2664fa.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2664
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  v-pos-supply:
+    description: Positive Supply Voltage Input.
+
+  v-neg-supply:
+    description: Negative Supply Voltage Input.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  ref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin.
+
+  clr-gpios:
+    description:
+      Active-low Asynchronous Clear Input. A logic low at this level-triggered
+      input clears the part to the reset code and range determined by the
+      hardwired option chosen using the MSPAN pins. The control registers are
+      cleared to zero.
+    maxItems: 1
+
+  adi,manual-span-operation-config:
+    description:
+      This property must mimic the MSPAN pin configurations. By tying the MSPAN
+      pins (MSP2, MSP1 and MSP0) to GND and/or VCC, any output range can be
+      hardware-configured with different mid-scale or zero-scale reset options.
+      The hardware configuration is latched during power on reset for proper
+      operation.
+        0 - MPS2=GND, MPS1=GND, MSP0=GND
+        1 - MPS2=GND, MPS1=GND, MSP0=VCC
+        2 - MPS2=GND, MPS1=VCC, MSP0=GND
+        3 - MPS2=GND, MPS1=VCC, MSP0=VCC
+        4 - MPS2=VCC, MPS1=GND, MSP0=GND
+        5 - MPS2=VCC, MPS1=GND, MSP0=VCC
+        6 - MPS2=VCC, MPS1=VCC, MSP0=GND
+        7 - MPS2=VCC, MPS1=VCC, MSP0=VCC (enables SoftSpan feature)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 7
+
+  io-channels:
+    description:
+      Analog multiplexer output. VOUT0-VOUT3, MUXIN0-MUXIN3, REFLO, REF, V+, V-,
+      and a temperature monitor output can be internally routed to the MUXOUT pin.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 3
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      adi,output-range-microvolt:
+        description: Specify the channel output full scale range.
+        oneOf:
+          - items:
+              - const: 0
+              - enum: [5000000, 10000000]
+          - items:
+              - const: -5000000
+              - const: 5000000
+          - items:
+              - const: -10000000
+              - const: 10000000
+          - items:
+              - const: -2500000
+              - const: 2500000
+
+    required:
+      - reg
+      - adi,output-range-microvolt
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - vcc-supply
+  - iovcc-supply
+  - v-pos-supply
+  - v-neg-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            compatible = "adi,ltc2664";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+
+            vcc-supply = <&vcc>;
+            iovcc-supply = <&vcc>;
+            ref-supply = <&vref>;
+            v-pos-supply = <&vpos>;
+            v-neg-supply = <&vneg>;
+
+            io-channels = <&adc 0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                    reg = <0>;
+                    adi,toggle-mode;
+                    adi,output-range-microvolt = <(-10000000) 10000000>;
+            };
+
+            channel@1 {
+                    reg = <1>;
+                    adi,output-range-microvolt = <0 10000000>;
+            };
+        };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index b3be54c09159..7becbdf7d1df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12857,6 +12857,7 @@ L:	linux-iio@xxxxxxxxxxxxxxx
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/ABI/testing/sysfs-bus-iio-dac
+F:	Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
 
 LTC2688 IIO DAC DRIVER
 M:	Nuno Sá <nuno.sa@xxxxxxxxxx>
-- 
2.34.1





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux