On Fri, May 10, 2024 at 10:43:18AM -0500, David Lechner wrote:
> On Fri, May 10, 2024 at 9:19 AM Angelo Dureghello
> <adureghello@xxxxxxxxxxxx> wrote:
> >
> > From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> >
> > The adi,gain-scaling-p/n values are an inverted log2,
> > so initial naiming was set correct, but the driver uses just
> > adi,gain-scaling-p/n, so uniforming documentation, that seems
> > a less-risk fix for future rebases, and still conformant to datasheet.
> >
> > Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 16 ++++++++--------
> > 1 file changed, 8 insertions(+), 8 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> > index 17442cdfbe27..9e3dbf890bfa 100644
> > --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> > +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> > @@ -94,13 +94,13 @@ patternProperties:
> > maximum: 511
> > minimum: -511
> >
> > - adi,gain-scaling-p-inv-log2:
> > - description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
> > + adi,gain-scaling-p:
> > + description: GainP = 1 / ( 2 ^ adi,gain-scaling-p)
> > $ref: /schemas/types.yaml#/definitions/uint32
> > enum: [0, 1, 2, 3]
> >
> > - adi,gain-scaling-n-inv-log2:
> > - description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
> > + adi,gain-scaling-n:
> > + description: GainN = 1 / ( 2 ^ adi,gain-scaling-n)
> > $ref: /schemas/types.yaml#/definitions/uint32
> > enum: [0, 1, 2, 3]
> >
> > @@ -109,8 +109,8 @@ patternProperties:
> >
> > required:
> > - adi,gain-offset
> > - - adi,gain-scaling-p-inv-log2
> > - - adi,gain-scaling-n-inv-log2
> > + - adi,gain-scaling-p
> > + - adi,gain-scaling-n
> > - adi,rfb-ohms
> >
> > required:
> > @@ -214,8 +214,8 @@ examples:
> > reg = <1>;
> > custom-output-range-config {
> > adi,gain-offset = <5>;
> > - adi,gain-scaling-p-inv-log2 = <1>;
> > - adi,gain-scaling-n-inv-log2 = <2>;
> > + adi,gain-scaling-p = <1>;
> > + adi,gain-scaling-n = <2>;
> > adi,rfb-ohms = <1>;
> > };
> > };
> > --
> > 2.45.0.rc1
> >
> >
>
> The DT bindings are generally considered immutable. So unless we can
> prove that no one has ever put adi,gain-scaling-n-inv-log2 in a .dtb
> file,
You can't ever prove that.
> we probably need to fix this in the driver rather than in the
> bindings. (The driver can still handle adi,gain-scaling-p in the
> driver for backwards compatibility but the official binding should be
> what was already accepted in the .yaml file)
If we can reasonable assume that the Linux driver is the only consumer,
there are no upstream dts users (in kernel or other opensource
projects), and/or the property is somewhat recent, then that's good
enough IMO.
Rob
