Probe the number of capture compare channels, by writing CCER register bits
and read them back. Take care to restore the register original value.
This is a precursor patch to support capture channels.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
---
Changes in v4:
- directly use dev struct in stm32_timer_cnt_detect_channels routine.
Changes in v3:
- New patch split from:
"counter: stm32-timer-cnt: populate capture channels and check encoder"
---
drivers/counter/stm32-timer-cnt.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
index 66039d1b3642..710437d3b33f 100644
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -42,6 +42,7 @@ struct stm32_timer_cnt {
bool enabled;
struct stm32_timer_regs bak;
bool has_encoder;
+ unsigned int nchannels;
};
static const enum counter_function stm32_count_functions[] = {
@@ -416,6 +417,20 @@ static struct counter_count stm32_counts = {
.num_ext = ARRAY_SIZE(stm32_count_ext)
};
+static void stm32_timer_cnt_detect_channels(struct device *dev,
+ struct stm32_timer_cnt *priv)
+{
+ u32 ccer, ccer_backup;
+
+ regmap_read(priv->regmap, TIM_CCER, &ccer_backup);
+ regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE);
+ regmap_read(priv->regmap, TIM_CCER, &ccer);
+ regmap_write(priv->regmap, TIM_CCER, ccer_backup);
+ priv->nchannels = hweight32(ccer & TIM_CCER_CCXE);
+
+ dev_dbg(dev, "has %d cc channels\n", priv->nchannels);
+}
+
/* encoder supported on TIM1 TIM2 TIM3 TIM4 TIM5 TIM8 */
#define STM32_TIM_ENCODER_SUPPORTED (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(7))
@@ -484,6 +499,8 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
if (ret)
return ret;
+ stm32_timer_cnt_detect_channels(dev, priv);
+
counter->name = dev_name(dev);
counter->parent = dev;
counter->ops = &stm32_timer_cnt_ops;
--
2.25.1
