On Sat, 24 Feb 2024 17:50:26 +0000
Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx> wrote:
> Hello Jonathan,
>
> the problem comes from the fifo rate setting code that is now using these states to compute if FIFO is on:
> fifo_on = st->chip_config.accl_fifo_enable ||
> st->chip_config.gyro_fifo_enable ||
> st->chip_config.magn_fifo_enable;
> result = inv_sensors_timestamp_update_odr(&st->timestamp, fifo_period, fifo_on);
> if (result)
> goto fifo_rate_fail_unlock;
>
> It was not the case before using the inv_sensors_timestamp module.
>
> If we don't set these states back to false, it is not possible to change frequency more than 1 time. This restriction comes from inv_sensors_timestamp module that is not able to handle accurately more than 1 frequency change when sensor FIFO is on. This restriction obviously doesn't exist when FIFO is off.
Thanks, now I understand. I've added a note to say the restriction
to a single pending update of ODR should only apply when the fifo
is on. Along with a link to this thread that should be enough to
help people understand the issue when consider whether to backport this
fix.
Applied to the fixes-togreg branch of iio.git.
Thanks,
Jonathan
>
> Thanks,
> JB
>
>
> From: Jonathan Cameron <jic23@xxxxxxxxxx>
> Sent: Saturday, February 24, 2024 17:22
> To: INV Git Commit <INV.git-commit@xxxxxxx>
> Cc: lars@xxxxxxxxxx <lars@xxxxxxxxxx>; linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx>; stable@xxxxxxxxxxxxxxx <stable@xxxxxxxxxxxxxxx>; Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
> Subject: Re: [PATCH v2] iio: imu: inv_mpu6050: fix frequency setting when chip is off
>
> On Mon, 19 Feb 2024 15: 47: 41 +0000 inv. git-commit@ tdk. com wrote: > From: Jean-Baptiste Maneyrol <jean-baptiste. maneyrol@ tdk. com> > > Track correctly FIFO state and apply ODR change before starting > the chip. Without the fix,
> ZjQcmQRYFpfptBannerStart
> This Message Is From an External Sender
> This message came from outside your organization.
>
> ZjQcmQRYFpfptBannerEnd
> On Mon, 19 Feb 2024 15:47:41 +0000
> inv.git-commit@xxxxxxx wrote:
>
> > From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>
> >
> > Track correctly FIFO state and apply ODR change before starting
> > the chip. Without the fix, you cannot change ODR more than 1 time
> > when data buffering is off.
>
> Hi Jean-Baptiste.
>
> I think this patch needs a little more explanation.
> 1) Why has state changed such that we need to update these cached values?
> 2) What does that have to do with ODR - or is this two unrelated fixes?
>
> I'm sure the fix is right - I just don't fully understand the issues!
> >
> > Fixes: 111e1abd0045 ("iio: imu: inv_mpu6050: use the common inv_sensors timestamp module")
> > Cc: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>
> > ---
> > V2: add missing stable tag
> >
> > drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> > index 676704f9151f..e6e6e94452a3 100644
> > --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> > +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> > @@ -111,6 +111,7 @@ int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable)
> > if (enable) {
> > /* reset timestamping */
> > inv_sensors_timestamp_reset(&st->timestamp);
> > + inv_sensors_timestamp_apply_odr(&st->timestamp, 0, 0, 0);
> > /* reset FIFO */
> > d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST;
> > ret = regmap_write(st->map, st->reg->user_ctrl, d);
> > @@ -184,6 +185,10 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
> > if (result)
> > goto error_power_off;
> > } else {
> > + st->chip_config.gyro_fifo_enable = 0;
> > + st->chip_config.accl_fifo_enable = 0;
> > + st->chip_config.temp_fifo_enable = 0;
> > + st->chip_config.magn_fifo_enable = 0;
> I think the write to actually do this is in prepare_fifo and it's not
> conditional on these, so why do we care?
>
> Are these effectively paired with inv_scan_query in the enable path?
>
>
> > result = inv_mpu6050_prepare_fifo(st, false);
> > if (result)
> > goto error_power_off;
> > --
> > 2.34.1
> >
>
