On Thu, 22 Feb 2024 19:06:23 +0000 Jonathan Cameron <jic23@xxxxxxxxxx> wrote: > The following changes since commit 6613476e225e090cc9aad49be7fa504e290dd33d: > > Linux 6.8-rc1 (2024-01-21 14:11:32 -0800) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.9a > > for you to fetch changes up to 3cc5ebd3a2d6247aeba81873d6b040d5d87f7db1: > > iio: imu: bmi323: Add ACPI Match Table (2024-02-19 19:34:44 +0000) > Hi Greg, There is a small conflict in here due to racing with a fix that went through the dt tree. Stephen has been carrying a fix up in linux-next which resolves it as expected. https://lore.kernel.org/linux-next/20240219143945.1460f25f@xxxxxxxxxxxxxxxx/ Thanks, Jonathan > ---------------------------------------------------------------- > IIO: 1st set of new device support, features and cleanup for 6.9 > > IIO Backend support > =================== > > New approach from Nuno Sa to the problem of reuse of drivers with > IIO devices that are actually the combination of a highspeed chip > and an FPGA core handling the data capture and flows. It will hopefully > also apply to some other split designs. The ad9467 and axi-adi drivers > are converted over to this framework. > > New device support > ================== > > adi,admfm2000 > - New driver for this dual microwave down converter. > ams,as73211 > - Add support for as7331 UV sensor. > richtek,rtq6056 > - Add support for related parts RTQ6053 and RTQ6059 > st,lsm6dsx > - Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs) > ti,ads1298 > - New driver for this medical ADC. > > Features > ======== > > tests > - Unit tests for the gain-time-scale helper library. > bosch,bmi088 > - I2C support. > bosh,bmi160 > - Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed. > The ID is actually a PCI ID belonging to realtech. No response was received > to earlier attempts to notify them of this. > The manufacturers of some devices have replied to say they will not fix > this incorrect ID. Add the ID and hope it isn't a problem. > bosch,bmi323 > - Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150 > driver (it appears these parts share a windows driver). > Both drivers perform an ID check that is safe on the other part before > successfully probing. > hid-sensors-als > - Add color temperature and chromaticity support. Note this is a replacement > for the series reverted in 6.8 that correctly handles all the potential > channel combinations. > honeywell,hsc030pa > - Triggered buffer support (after driver cleanup). > honeywell,mprls00025pa > - Improved error handling. > - New DT binding to allow use of part number triplet as provided in data sheet > to specify equivalent of most of the binding more efficiently. > - SPI support. > memsic,mxc4005 > - ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023 > ti,hdc3020 > - Add threshold event support (after some driver cleanup) > veml,vcnl4000 > - Switch to high resolution proximity measurement. > > Cleanup > ======= > Various minor typo fixes and better use of defines etc. > > Treewide > - Stop using ACPI_PTR(). The savings in space are small and not worth > the complexity of __maybe_unused of ifdef guards. To avoid use in > new IIO drivers based on copy and paste, clean it out. > - cleanup.h based handling of iio_device_claim_direct_mode()/ > iio_device_release_direct_mode() using scope_cond_guard(). > In many drivers this is combined with other automated cleanup > to give maximum simplifications. > An initial set of drivers are converted over to this infrastructure. > > Tools > - Use rewinddir() instead of seekdir() to return to start of file. > > core > - Make iio_bus_type constant. > > adi,ad16475 > - Use irq_get_trigger_type() instead of opencoding. > adi,ad16480 > - Use irq_get_trigger_type() instead of opencoding. > adi,ad-sigma-delta > - Avoid overwriting IRQ flags if provided by firmware. > ams,as73211 > - Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially > improve accuracy. > gts-library > - Use a div64_u64() instead of a loop to do a division. > honeywell,mprls00025pa > - Clean up dt-binding doc. > - Drop defaults when DT binding not providing values. Very unlikely > these were useful given they were wrong for vast majority of supported > devices. > - Whitespace cleanup > miramems,da280 > - Use i2c_get_match_data() to replace hand rolled ACPI matching code. > semtech,sx9324 > - Avoid unnecessary copying of property strings. > st,lsm6dsx > - Improve docs, particularly wrt to making addition of new device > support less noisy. > st,lsm9ds0 > - Use dev_err_probe() in all probe() error handling. > - Improved header includes. > - Tidy up termination of ID tables. > ti,ads1014 > - Correct upper bound on PGA (wrong value had no actual impact) > ti,afe4403/4404 > - devm_ useage to simplify error handling in probe() and allow() remove to > be dropped. > voltage-divider > - Add dt-binding for io-channel-cells to allow such a device to be both > an IIO consumer and IIO producer at the same time. > > ---------------------------------------------------------------- > Amit Dhingra (1): > MAINTAINERS: correct file entry for AD7091R > > Andrew Davis (4): > iio: health: afe4403: Use devm action helper for regulator disable > iio: health: afe4403: Use devm IIO helpers > iio: health: afe4404: Use devm action helper for regulator disable > iio: health: afe4404: Use devm IIO helpers > > Basavaraj Natikar (2): > iio: hid-sensor-als: Add light color temperature support > iio: hid-sensor-als: Add light chromaticity support > > ChiYuan Huang (2): > dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family > iio: adc: rtq6056: Add support for the whole RTQ6056 family > > Colin Ian King (1): > iio: invensense: remove redundant initialization of variable period > > David Lechner (1): > iio: core: use INDIO_ALL_BUFFER_MODES in iio_buffer_enabled() > > Dimitri Fedrau (3): > iio: humidity: hdc3020: switch to 16bit register defines > dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example > iio: humidity: hdc3020: add threshold events support > > Hans de Goede (1): > iio: accel: da280: Simplify id-matching > > Javier Carrasco (3): > iio: light: as73211: use IIO_VAL_FRACTIONAL for intensity scales > dt-bindings: iio: light: as73211: add support for as7331 > iio: light: as73211: add support for as7331 > > Jesus Gonzalez (1): > Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices > > Jonathan Cameron (34): > iio: accel: da280: Stop using ACPI_PTR() > iio: accel: kxcjk-1013: Move acpi_device_id table under ifdef CONFIG_ACPI > iio: accel: mma9551: Drop ACPI_PTR() usage > iio: accel: mma9553: Drop ACPI_PTR() usage > iio: accel: mxc4005: Drop ACPI_PTR() usage > iio: accel: mxc6255: Drop ACPI_PTR() usage > iio: accel: stk8ba50: Drop ACPI_PTR() usage > iio: accel: bmc150: Drop ACPI_PTR() > iio: gyro: bmg160: Drop ACPI_PTR() usage > iio: humidity: hts221: Drop ACPI_PTR() usage > iio: imu: fxos8700: Drop ACPI_PTR() usage > iio: imu: kmx61: Drop ACPI_PTR() usage > iio: light: jsa1212: Drop ACPI_PTR() usage > iio: light: ltr501: Drop ACPI_PTR() usage > iio: light: rpr0521: Drop ACPI_PTR() usage > iio: light: stk3310: Drop ACPI_PTR() usage > iio: light: us5182d: Drop ACPI_PTR() usage > iio: magnetometer: bmc150: Drop ACPI_PTR() usage > iio: magnetometer: mmc35240: Drop ACPI_PTR() usage > iio: potentiometer: max5487: Drop ACPI_PTR() usage > iio: st_sensors: drop ACPI_PTR() and CONFIG_ACPI guards > iio: pressure: hp206c: drop ACPI_PTR() and CONFIG_ACPI guards > iio: light: max44000: drop ACPI_PTR() and CONFIG_ACPI guards > iio: adc: ti-adc109s102: drop ACPI_PTR() and CONFIG_ACPI guards > iio: locking: introduce __cleanup() based direct mode claiming infrastructure > iio: dummy: Use automatic lock and direct mode cleanup. > iio: accel: adxl367: Use automated cleanup for locks and iio direct mode. > iio: imu: bmi323: Use cleanup handling for iio_device_claim_direct_mode() > iio: adc: max1363: Use automatic cleanup for locks and iio mode claiming. > iio: proximity: sx9360: Use automated cleanup for locks and IIO mode claiming. > iio: proximity: sx9324: Use automated cleanup for locks and IIO mode claiming. > iio: proximity: sx9310: Use automated cleanup for locks and IIO mode claiming. > iio: adc: ad4130: Use automatic cleanup of locks and direct mode. > iio: adc: ad7091r-base: Use auto cleanup of locks. > > Jonathan LoBue (2): > iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver > iio: imu: bmi323: Add ACPI Match Table > > Jun Yan (1): > iio: accel: bmi088: add i2c support for bmi088 accel driver > > Justin Stitt (1): > iio: sx9324: avoid copying property strings > > Kim Seer Paller (2): > dt-bindings: iio: frequency: add admfm2000 > iio: frequency: admfm2000: New driver > > Lorenzo Bianconi (3): > iio: imu: st_lsm6dsx: improve kernel docs and comments > iio: imu: st_lsm6dsx: add support to ASM330LHHXG1 > dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhxg1 > > Matti Vaittinen (3): > iio: test: test gain-time-scale helpers > MAINTAINERS: add IIO GTS tests > iio: gts-helper: Fix division loop > > Mike Looijmans (2): > dt-bindings: iio: adc: ti-ads1298: Add bindings > iio: adc: ti-ads1298: Add driver > > Mohammed Billoo (1): > iio: adc: ti-ads1015: Use correct pga upper bound > > Mårten Lindahl (1): > iio: light: vcnl4000: Set ps high definition for 4040/4200 > > Naresh Solanki (1): > dt-bindings: iio: afe: voltage-divider: Add io-channel-cells > > Nikita Mikhailevich (1): > iio: accel: mxc4005: new ACPI ID for the MXC6655 accelerometer > > Nuno Sa (10): > iio: buffer-dmaengine: make use of the 'struct device *' argument > iio: imu: adis16475: make use of irq_get_trigger_type() > iio: imu: adis16480: make use of irq_get_trigger_type() > iio: adc: ad_sigma_delta: allow overwriting the IRQ flags > dt-bindings: adc: ad9467: add new io-backend property > dt-bindings: adc: axi-adc: update bindings for backend framework > iio: buffer-dmaengine: export buffer alloc and free functions > iio: add the IIO backend framework > iio: adc: ad9467: convert to backend framework > iio: adc: adi-axi-adc: move to backend framework > > Olivier Moysan (1): > of: property: add device link support for io-backends > > Petre Rodan (17): > dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml improvements > dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet > dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus > iio: pressure: mprls0025pa fix off-by-one enum > iio: pressure: mprls0025pa improve driver error resilience > iio: pressure: mprls0025pa remove defaults > iio: pressure: mprls0025pa whitespace cleanup > iio: pressure: mprls0025pa refactor to split core and i2c parts. > iio: pressure: mprls0025pa add triplet property > iio: pressure: mprls0025pa add SPI driver > tools: iio: replace seekdir() in iio_generic_buffer > dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props > iio: pressure: hsc030pa: use signed type to hold div_64() result > iio: pressure: hsc030pa: include cleanup > iio: pressure: hsc030pa: update datasheet URLs > iio: pressure: hsc030pa add mandatory delay > iio: pressure: hsc030pa add triggered buffer > > Randy Dunlap (1): > iio: dummy_evgen: remove Excess kernel-doc comments > > Ricardo B. Marliere (1): > iio: core: make iio_bus_type const > > Srinivas Pandruvada (2): > iio: hid-sensor-als: Assign channels dynamically > iio: hid-sensor-als: Remove hardcoding of values for enums > > andy.shevchenko@xxxxxxxxx (3): > iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere > iio: st_sensors: lsm9ds0: Don't use "proxy" headers > iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables > > .../devicetree/bindings/iio/adc/adi,ad9467.yaml | 4 + > .../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 8 +- > .../bindings/iio/adc/richtek,rtq6056.yaml | 9 +- > .../devicetree/bindings/iio/adc/ti,ads1298.yaml | 80 +++ > .../bindings/iio/afe/voltage-divider.yaml | 11 + > .../bindings/iio/frequency/adi,admfm2000.yaml | 127 ++++ > .../bindings/iio/humidity/ti,hdc3020.yaml | 3 + > .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 4 +- > .../devicetree/bindings/iio/light/ams,as73211.yaml | 7 +- > .../bindings/iio/pressure/honeywell,hsc030pa.yaml | 3 + > .../iio/pressure/honeywell,mprls0025pa.yaml | 98 ++- > MAINTAINERS | 22 +- > drivers/iio/Kconfig | 9 + > drivers/iio/Makefile | 1 + > drivers/iio/accel/Kconfig | 8 +- > drivers/iio/accel/Makefile | 1 + > drivers/iio/accel/adxl367.c | 297 ++++---- > drivers/iio/accel/bmc150-accel-i2c.c | 15 +- > drivers/iio/accel/bmc150-accel-spi.c | 3 +- > drivers/iio/accel/bmi088-accel-i2c.c | 70 ++ > drivers/iio/accel/da280.c | 66 +- > drivers/iio/accel/kxcjk-1013.c | 33 +- > drivers/iio/accel/mma9551.c | 4 +- > drivers/iio/accel/mma9553.c | 4 +- > drivers/iio/accel/mxc4005.c | 5 +- > drivers/iio/accel/mxc6255.c | 4 +- > drivers/iio/accel/st_accel_i2c.c | 5 +- > drivers/iio/accel/stk8ba50.c | 4 +- > drivers/iio/adc/Kconfig | 15 +- > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/ad4130.c | 131 ++-- > drivers/iio/adc/ad7091r-base.c | 25 +- > drivers/iio/adc/ad9467.c | 267 ++++--- > drivers/iio/adc/ad_sigma_delta.c | 7 +- > drivers/iio/adc/adi-axi-adc.c | 385 +++-------- > drivers/iio/adc/max1363.c | 171 +++-- > drivers/iio/adc/rtq6056.c | 275 +++++++- > drivers/iio/adc/ti-adc108s102.c | 4 +- > drivers/iio/adc/ti-ads1015.c | 2 +- > drivers/iio/adc/ti-ads1298.c | 769 +++++++++++++++++++++ > drivers/iio/buffer/industrialio-buffer-dmaengine.c | 11 +- > .../iio/common/inv_sensors/inv_sensors_timestamp.c | 2 +- > drivers/iio/dummy/iio_dummy_evgen.c | 2 - > drivers/iio/dummy/iio_simple_dummy.c | 185 +++-- > drivers/iio/frequency/Kconfig | 10 + > drivers/iio/frequency/Makefile | 1 + > drivers/iio/frequency/admfm2000.c | 282 ++++++++ > drivers/iio/gyro/bmg160_i2c.c | 4 +- > drivers/iio/health/afe4403.c | 65 +- > drivers/iio/health/afe4404.c | 65 +- > drivers/iio/humidity/hdc3020.c | 445 ++++++++---- > drivers/iio/humidity/hts221_i2c.c | 4 +- > drivers/iio/imu/adis16475.c | 8 +- > drivers/iio/imu/adis16480.c | 9 +- > drivers/iio/imu/bmi160/bmi160_i2c.c | 9 + > drivers/iio/imu/bmi323/bmi323_core.c | 78 +-- > drivers/iio/imu/bmi323/bmi323_i2c.c | 21 + > drivers/iio/imu/fxos8700_i2c.c | 3 +- > drivers/iio/imu/fxos8700_spi.c | 3 +- > drivers/iio/imu/kmx61.c | 2 +- > drivers/iio/imu/st_lsm6dsx/Kconfig | 31 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 + > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 28 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 33 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 + > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 + > drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h | 5 +- > drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 21 +- > drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 6 +- > drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 4 +- > drivers/iio/industrialio-backend.c | 418 +++++++++++ > drivers/iio/industrialio-core.c | 6 +- > drivers/iio/industrialio-gts-helper.c | 15 +- > drivers/iio/light/Kconfig | 5 +- > drivers/iio/light/as73211.c | 142 +++- > drivers/iio/light/hid-sensor-als.c | 122 +++- > drivers/iio/light/jsa1212.c | 4 +- > drivers/iio/light/ltr501.c | 3 +- > drivers/iio/light/max44000.c | 6 +- > drivers/iio/light/rpr0521.c | 4 +- > drivers/iio/light/stk3310.c | 4 +- > drivers/iio/light/us5182d.c | 4 +- > drivers/iio/light/vcnl4000.c | 36 +- > drivers/iio/magnetometer/bmc150_magn_i2c.c | 3 +- > drivers/iio/magnetometer/bmc150_magn_spi.c | 3 +- > drivers/iio/magnetometer/mmc35240.c | 4 +- > drivers/iio/potentiometer/max5487.c | 4 +- > drivers/iio/pressure/Kconfig | 16 +- > drivers/iio/pressure/Makefile | 2 + > drivers/iio/pressure/hp206c.c | 6 +- > drivers/iio/pressure/hsc030pa.c | 49 +- > drivers/iio/pressure/hsc030pa.h | 7 + > drivers/iio/pressure/hsc030pa_i2c.c | 9 +- > drivers/iio/pressure/hsc030pa_spi.c | 7 +- > drivers/iio/pressure/mprls0025pa.c | 313 ++++----- > drivers/iio/pressure/mprls0025pa.h | 102 +++ > drivers/iio/pressure/mprls0025pa_i2c.c | 100 +++ > drivers/iio/pressure/mprls0025pa_spi.c | 92 +++ > drivers/iio/pressure/st_pressure_i2c.c | 5 +- > drivers/iio/proximity/sx9310.c | 114 ++- > drivers/iio/proximity/sx9324.c | 178 +++-- > drivers/iio/proximity/sx9360.c | 115 ++- > drivers/iio/test/Kconfig | 14 + > drivers/iio/test/Makefile | 1 + > drivers/iio/test/iio-test-gts.c | 513 ++++++++++++++ > drivers/of/property.c | 2 + > include/linux/hid-sensor-ids.h | 4 + > include/linux/iio/adc/adi-axi-adc.h | 68 -- > include/linux/iio/backend.h | 72 ++ > include/linux/iio/buffer-dmaengine.h | 3 + > include/linux/iio/iio.h | 30 +- > tools/iio/iio_utils.c | 2 +- > 112 files changed, 5038 insertions(+), 1875 deletions(-) > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml > create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml > create mode 100644 drivers/iio/accel/bmi088-accel-i2c.c > create mode 100644 drivers/iio/adc/ti-ads1298.c > create mode 100644 drivers/iio/frequency/admfm2000.c > create mode 100644 drivers/iio/industrialio-backend.c > create mode 100644 drivers/iio/pressure/mprls0025pa.h > create mode 100644 drivers/iio/pressure/mprls0025pa_i2c.c > create mode 100644 drivers/iio/pressure/mprls0025pa_spi.c > create mode 100644 drivers/iio/test/iio-test-gts.c > delete mode 100644 include/linux/iio/adc/adi-axi-adc.h > create mode 100644 include/linux/iio/backend.h >
