On Tue, Feb 20, 2024 at 11:43:38AM +0200, Dumitru Ceclan wrote:
> + interrupts:
> + minItems: 1
> + description: |
> +
> + interrupt-names:
> + minItems: 1
> + items:
> + - const: rdy
> + - const: err
I noticed that for minItems == 1, the rdy interrupt is required and err
is the optional one.
With that in mind, you can simplify the interrupts description so that
it describes the interrupts separately:
interrupts:
minItems:
items:
- description:
Ready: multiplexed with SPI data out. While SPI CS is low,
can be used to indicate the completion of a conversion.
- description:
Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR,
and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin. Therefore,
the ERROR pin indicates that an error has occurred.
Otherwise, I think everything has been sorted out?
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Cheers,
Conor.
Attachment:
signature.asc
Description: PGP signature
