HDC2010 and HDC2080 humidity sensors both have an interrupt / data-ready signal which can be used for signaling to the host. Add binding for "interrupts" property so that boards wiring this signal may describe the connection. Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- Changes in v7: - split out of original patchset because it should go via iio tree - collected acked-by Rob Herring from v6 - Link to v6: https://lore.kernel.org/r/20240212-add-am64-som-v6-0-b59edb2bc8c3@xxxxxxxxxxxxx --- Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index 79e75a8675cb..e3eca8917517 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -27,6 +27,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + required: - compatible - reg --- base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d change-id: 20240219-iio-hdc20x0-interrupt-binding-42307b7b99b5 Best regards, -- Josua Mayer <josua@xxxxxxxxxxxxx>
