On Fri, Feb 16, 2024 at 07:50:01PM +0100, megi xff wrote:
> From: Icenowy Zheng <icenowy@xxxxxxx>
>
> AF8133J is a simple I2C-connected magnetometer, without interrupts.
>
> Add a simple IIO driver for it.
>
> Co-developed-by: Icenowy Zheng <icenowy@xxxxxxx>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> Signed-off-by: Dalton Durst <dalton@xxxxxxxxxxx>
> Signed-off-by: Shoji Keita <awaittrot@xxxxxxx>
> Co-developed-by: Ondrej Jirman <megi@xxxxxx>
> Signed-off-by: Ondrej Jirman <megi@xxxxxx>
> Reviewed-by: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
> Tested-by: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
> ---
> drivers/iio/magnetometer/Kconfig | 12 +
> drivers/iio/magnetometer/Makefile | 1 +
> drivers/iio/magnetometer/af8133j.c | 524 +++++++++++++++++++++++++++++
> 3 files changed, 537 insertions(+)
> create mode 100644 drivers/iio/magnetometer/af8133j.c
>
> diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
> index 38532d840f2a..cd2917d71904 100644
> --- a/drivers/iio/magnetometer/Kconfig
> +++ b/drivers/iio/magnetometer/Kconfig
> @@ -6,6 +6,18 @@
>
> menu "Magnetometer sensors"
>
> +config AF8133J
> + tristate "Voltafield AF8133J 3-Axis Magnetometer"
> + depends on I2C
> + depends on OF
> + select REGMAP_I2C
> + help
> + Say yes here to build support for Voltafield AF8133J I2C-based
> + 3-axis magnetometer chip.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called af8133j.
> +
> config AK8974
> tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
> depends on I2C
> diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
> index b1c784ea71c8..ec5c46fbf999 100644
> --- a/drivers/iio/magnetometer/Makefile
> +++ b/drivers/iio/magnetometer/Makefile
> @@ -4,6 +4,7 @@
> #
>
> # When adding new entries keep the list in alphabetical order
> +obj-$(CONFIG_AF8133J) += af8133j.o
> obj-$(CONFIG_AK8974) += ak8974.o
> obj-$(CONFIG_AK8975) += ak8975.o
> obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o
> diff --git a/drivers/iio/magnetometer/af8133j.c b/drivers/iio/magnetometer/af8133j.c
> new file mode 100644
> index 000000000000..fcb4f0a8e633
> --- /dev/null
> +++ b/drivers/iio/magnetometer/af8133j.c
> @@ -0,0 +1,524 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * af8133j.c - Voltafield AF8133J magnetometer driver
> + *
> + * Copyright 2021 Icenowy Zheng <icenowy@xxxxxxx>
> + * Copyright 2024 Ondřej Jirman <megi@xxxxxx>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +
> +#define AF8133J_REG_OUT 0x03
> +#define AF8133J_REG_PCODE 0x00
> +#define AF8133J_REG_PCODE_VAL 0x5e
> +#define AF8133J_REG_STATUS 0x02
> +#define AF8133J_REG_STATUS_ACQ BIT(0)
> +#define AF8133J_REG_STATE 0x0a
> +#define AF8133J_REG_STATE_STBY 0x00
> +#define AF8133J_REG_STATE_WORK 0x01
> +#define AF8133J_REG_RANGE 0x0b
> +#define AF8133J_REG_RANGE_22G 0x12
> +#define AF8133J_REG_RANGE_12G 0x34
> +#define AF8133J_REG_SWR 0x11
> +#define AF8133J_REG_SWR_PERFORM 0x81
> +
> +static const char * const af8133j_supply_names[] = {
> + "avdd",
> + "dvdd",
> +};
> +
> +struct af8133j_data {
> + struct i2c_client *client;
> + struct regmap *regmap;
> + struct mutex mutex;
> + struct iio_mount_matrix orientation;
> +
> + struct gpio_desc *reset_gpiod;
> + struct regulator_bulk_data supplies[ARRAY_SIZE(af8133j_supply_names)];
> +
> + u8 range;
> +};
> +
> +enum af8133j_axis {
> + AXIS_X = 0,
> + AXIS_Y,
> + AXIS_Z,
> +};
> +
> +static struct iio_mount_matrix *
> +af8133j_get_mount_matrix(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan)
> +{
> + struct af8133j_data *data = iio_priv(indio_dev);
> +
> + return &data->orientation;
> +}
> +
> +static const struct iio_chan_spec_ext_info af8133j_ext_info[] = {
> + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, af8133j_get_mount_matrix),
> + { }
> +};
> +
> +#define AF8133J_CHANNEL(_si, _axis) { \
> + .type = IIO_MAGN, \
> + .modified = 1, \
> + .channel2 = IIO_MOD_ ## _axis, \
> + .address = AXIS_ ## _axis, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), \
> + .ext_info = af8133j_ext_info, \
> + .scan_index = _si, \
> + .scan_type = { \
> + .sign = 's', \
> + .realbits = 16, \
> + .storagebits = 16, \
> + .endianness = IIO_LE, \
> + }, \
> +}
> +
> +static const struct iio_chan_spec af8133j_channels[] = {
> + AF8133J_CHANNEL(0, X),
> + AF8133J_CHANNEL(1, Y),
> + AF8133J_CHANNEL(2, Z),
> + IIO_CHAN_SOFT_TIMESTAMP(3),
> +};
> +
> +static int af8133j_product_check(struct af8133j_data *data)
> +{
> + struct device *dev = &data->client->dev;
> + unsigned int val;
> + int ret;
> +
> + ret = regmap_read(data->regmap, AF8133J_REG_PCODE, &val);
> + if (ret) {
> + dev_err(dev, "Error reading product code (%d)\n", ret);
> + return ret;
> + }
> +
> + if (val != AF8133J_REG_PCODE_VAL) {
> + dev_err(dev, "Invalid product code (0x%02x)\n", val);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int af8133j_reset(struct af8133j_data *data)
> +{
> + struct device *dev = &data->client->dev;
> + int ret;
> +
> + if (data->reset_gpiod) {
> + /* If we have GPIO reset line, use it */
> + gpiod_set_value_cansleep(data->reset_gpiod, 1);
> + udelay(10);
> + gpiod_set_value_cansleep(data->reset_gpiod, 0);
> + } else {
> + /* Otherwise use software reset */
> + ret = regmap_write(data->regmap, AF8133J_REG_SWR,
> + AF8133J_REG_SWR_PERFORM);
> + if (ret) {
> + dev_err(dev, "Failed to reset the chip\n");
> + return ret;
> + }
> + }
> +
> + /* Wait for reset to finish */
> + usleep_range(1000, 1100);
> +
> + /* Restore range setting */
> + if (data->range == AF8133J_REG_RANGE_22G) {
> + ret = regmap_write(data->regmap, AF8133J_REG_RANGE, data->range);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void af8133j_power_down(struct af8133j_data *data)
> +{
> + gpiod_set_value_cansleep(data->reset_gpiod, 1);
> + regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
> +}
> +
> +static int af8133j_power_up(struct af8133j_data *data)
> +{
> + struct device *dev = &data->client->dev;
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
> + if (ret) {
> + dev_err(dev, "Could not enable regulators\n");
> + return ret;
> + }
> +
> + gpiod_set_value_cansleep(data->reset_gpiod, 0);
> +
> + /* Wait for power on reset */
> + usleep_range(15000, 16000);
> +
> + ret = af8133j_reset(data);
> + if (ret) {
> + af8133j_power_down(data);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int af8133j_take_measurement(struct af8133j_data *data)
> +{
> + unsigned int val;
> + int ret;
> +
> + ret = regmap_write(data->regmap,
> + AF8133J_REG_STATE, AF8133J_REG_STATE_WORK);
> + if (ret)
> + return ret;
> +
> + /* The datasheet says "Mesaure Time <1.5ms" */
> + ret = regmap_read_poll_timeout(data->regmap, AF8133J_REG_STATUS, val,
> + val & AF8133J_REG_STATUS_ACQ,
> + 500, 1500);
> + if (ret)
> + return ret;
> +
> + ret = regmap_write(data->regmap,
> + AF8133J_REG_STATE, AF8133J_REG_STATE_STBY);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int af8133j_read_measurement(struct af8133j_data *data, __le16 buf[3])
> +{
> + struct device *dev = &data->client->dev;
> + int ret;
> +
> + ret = pm_runtime_resume_and_get(dev);
> + if (ret) {
> + /*
> + * Ignore EACCES because that happens when RPM is disabled
> + * during system sleep, while userspace leave eg. hrtimer
> + * trigger attached and IIO core keeps trying to do measurements.
> + */
> + if (ret != -EACCES)
> + dev_err(dev, "Failed to power on (%d)\n", ret);
> + return ret;
> + }
> +
> + scoped_guard(mutex, &data->mutex) {
> + ret = af8133j_take_measurement(data);
> + if (ret)
> + goto out_rpm_put;
> +
> + ret = regmap_bulk_read(data->regmap, AF8133J_REG_OUT,
> + buf, sizeof(__le16) * 3);
> + }
> +
> +out_rpm_put:
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_autosuspend(dev);
> +
> + return ret;
> +}
> +
> +static const int af8133j_scales[][2] = {
> + [0] = { 0, 366210 }, // 12 gauss
> + [1] = { 0, 671386 }, // 22 gauss
> +};
> +
> +static int af8133j_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long mask)
> +{
> + struct af8133j_data *data = iio_priv(indio_dev);
> + __le16 buf[3];
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = af8133j_read_measurement(data, buf);
> + if (ret)
> + return ret;
> +
> + *val = sign_extend32(le16_to_cpu(buf[chan->address]),
> + chan->scan_type.realbits - 1);
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = 0;
> +
> + if (data->range == AF8133J_REG_RANGE_12G)
> + *val2 = af8133j_scales[0][1];
> + else
> + *val2 = af8133j_scales[1][1];
> +
> + return IIO_VAL_INT_PLUS_NANO;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int af8133j_read_avail(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + const int **vals, int *type, int *length,
> + long mask)
> +{
> + switch (mask) {
> + case IIO_CHAN_INFO_SCALE:
> + *vals = (const int *)af8133j_scales;
> + *length = ARRAY_SIZE(af8133j_scales) * 2;
> + *type = IIO_VAL_INT_PLUS_NANO;
> + return IIO_AVAIL_LIST;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int af8133j_set_scale(struct af8133j_data *data,
> + unsigned int val, unsigned int val2)
> +{
> + struct device *dev = &data->client->dev;
> + u8 range;
> + int ret = 0;
> +
> + if (af8133j_scales[0][0] == val && af8133j_scales[0][1] == val2)
> + range = AF8133J_REG_RANGE_12G;
> + else if (af8133j_scales[1][0] == val && af8133j_scales[1][1] == val2)
> + range = AF8133J_REG_RANGE_22G;
> + else
> + return -EINVAL;
> +
> + pm_runtime_disable(dev);
> +
> + /*
> + * When suspended, just store the new range to data->range to be
> + * applied later during power up.
> + */
> + if (!pm_runtime_status_suspended(dev))
> + scoped_guard(mutex, &data->mutex)
> + ret = regmap_write(data->regmap,
> + AF8133J_REG_RANGE, range);
> +
> + pm_runtime_enable(dev);
> +
> + data->range = range;
> + return ret;
> +}
> +
> +static int af8133j_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct af8133j_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SCALE:
> + return af8133j_set_scale(data, val, val2);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int af8133j_write_raw_get_fmt(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + long mask)
> +{
> + return IIO_VAL_INT_PLUS_NANO;
> +}
> +
> +static const struct iio_info af8133j_info = {
> + .read_raw = af8133j_read_raw,
> + .read_avail = af8133j_read_avail,
> + .write_raw = af8133j_write_raw,
> + .write_raw_get_fmt = af8133j_write_raw_get_fmt,
> +};
> +
> +static irqreturn_t af8133j_trigger_handler(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct af8133j_data *data = iio_priv(indio_dev);
> + s64 timestamp = iio_get_time_ns(indio_dev);
> + struct {
> + __le16 values[3];
> + s64 timestamp __aligned(8);
> + } sample;
> + int ret;
> +
> + memset(&sample, 0, sizeof(sample));
> +
> + ret = af8133j_read_measurement(data, sample.values);
> + if (ret)
> + goto out_done;
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, &sample, timestamp);
> +
> +out_done:
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static const struct regmap_config af8133j_regmap_config = {
> + .name = "af8133j_regmap",
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = AF8133J_REG_SWR,
> + .cache_type = REGCACHE_NONE,
> +};
> +
> +static void af8133j_power_down_action(void *ptr)
> +{
> + struct af8133j_data *data = ptr;
> +
> + if (!pm_runtime_status_suspended(&data->client->dev))
> + af8133j_power_down(data);
> +}
> +
> +static int af8133j_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct af8133j_data *data;
> + struct iio_dev *indio_dev;
> + struct regmap *regmap;
> + int ret, i;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + regmap = devm_regmap_init_i2c(client, &af8133j_regmap_config);
> + if (IS_ERR(regmap))
> + return dev_err_probe(dev, PTR_ERR(regmap),
> + "regmap initialization failed\n");
> +
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> + data->regmap = regmap;
> + data->range = AF8133J_REG_RANGE_12G;
> + mutex_init(&data->mutex);
> +
> + data->reset_gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(data->reset_gpiod))
> + return dev_err_probe(dev, PTR_ERR(data->reset_gpiod),
> + "Failed to get reset gpio\n");
> +
> + for (i = 0; i < ARRAY_SIZE(af8133j_supply_names); i++)
> + data->supplies[i].supply = af8133j_supply_names[i];
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
> + data->supplies);
> + if (ret)
> + return ret;
> +
> + ret = iio_read_mount_matrix(dev, &data->orientation);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to read mount matrix\n");
> +
> + ret = af8133j_power_up(data);
> + if (ret)
> + return ret;
> +
> + pm_runtime_set_active(dev);
> +
> + ret = devm_add_action_or_reset(dev, af8133j_power_down_action, data);
> + if (ret)
> + return ret;
> +
> + ret = af8133j_product_check(data);
> + if (ret)
> + return ret;
> +
> + indio_dev->info = &af8133j_info;
> + indio_dev->name = "af8133j";
> + indio_dev->channels = af8133j_channels;
> + indio_dev->num_channels = ARRAY_SIZE(af8133j_channels);
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
> + &af8133j_trigger_handler, NULL);
> + if (ret)
> + return dev_err_probe(&client->dev, ret,
> + "Failed to setup iio triggered buffer\n");
> +
> + ret = devm_iio_device_register(dev, indio_dev);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to register iio device");
> +
> + pm_runtime_get_noresume(dev);
> + pm_runtime_use_autosuspend(dev);
> + pm_runtime_set_autosuspend_delay(dev, 500);
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + return ret;
Ah, forgot to move this up. Oh, well. I'll send v4.
kind regards,
o.
> + pm_runtime_put_autosuspend(dev);
> +
> + return 0;
> +}
> +
> +static int af8133j_runtime_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct af8133j_data *data = iio_priv(indio_dev);
> +
> + af8133j_power_down(data);
> +
> + return 0;
> +}
> +
> +static int af8133j_runtime_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct af8133j_data *data = iio_priv(indio_dev);
> +
> + return af8133j_power_up(data);
> +}
> +
> +const struct dev_pm_ops af8133j_pm_ops = {
> + SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
> + RUNTIME_PM_OPS(af8133j_runtime_suspend, af8133j_runtime_resume, NULL)
> +};
> +
> +static const struct of_device_id af8133j_of_match[] = {
> + { .compatible = "voltafield,af8133j", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, af8133j_of_match);
> +
> +static const struct i2c_device_id af8133j_id[] = {
> + { "af8133j", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, af8133j_id);
> +
> +static struct i2c_driver af8133j_driver = {
> + .driver = {
> + .name = "af8133j",
> + .of_match_table = af8133j_of_match,
> + .pm = pm_ptr(&af8133j_pm_ops),
> + },
> + .probe = af8133j_probe,
> + .id_table = af8133j_id,
> +};
> +
> +module_i2c_driver(af8133j_driver);
> +
> +MODULE_AUTHOR("Icenowy Zheng <icenowy@xxxxxxx>");
> +MODULE_AUTHOR("Ondřej Jirman <megi@xxxxxx>");
> +MODULE_DESCRIPTION("Voltafield AF8133J magnetic sensor driver");
> +MODULE_LICENSE("GPL");
> --
> 2.43.0
>
