On Wed, 14 Feb 2024 09:53:42 +0100 Dimitri Fedrau <dima.fedrau@xxxxxxxxx> wrote: > Based on Fix: > a69eeaad093d "iio: humidity: hdc3020: fix temperature offset" in branch > fixes-togreg This applies fine independent of that (they will meet each other upstream!) so I'll take this via my tree now rather than waiting to get that dependency after a pull request / rebase. It will also actually get built in next where the missing Kconfig / Makefile fix is in place. Applied to the togreg branch of iio.git. Normally I'd push it out as testing but given I haven't yet queued anything up today and this won't get built until it hits next I've pushed it out as togreg directly after a quick local build test. Thanks, Jonathan > > Changes in V2: > - Fix alphabetical order of includes(Christophe) > - Fix typo: change varibale name "HDC3020_R_R_RH_THRESH_LOW_CLR" to > HDC3020_R_T_RH_THRESH_LOW_CLR to match variable name pattern(Christophe) > - Add constants HDC3020_MIN_TEMP and HDC3020_MAX_TEMP for min/max threshold > inputs (Christophe) > - Change HDC3020_MIN_TEMP to -40, as stated in the datasheet(Javier) > > Changes in V3: > - drop u8 register pairs and switch to 16bit defines(Jonathan) > - create helper functions to avoid code duplication(Jonathan) > - Add interrupt bindings in example > - use the decimal part for setting thresholds(Javier) > - use return in switch cases hdc3020_read_thresh(Jonathan) > - fix interrupt handler:(Jonathan) > - return IRQ_HANDLED when we get a read back failure > - take the timestamp into a local variable > - fix multiline comments(Jonathan) > - use fixed value "hdc3020" instead of dev_id in probe > - clear interrupt after registering the interrupt handler > - remove interrupt polarity > > Changes in V4: > - fix commit message of patch "iio: humidity: hdc3020: switch to 16bit > register defines". (Jonathan) > - add missing include in bindings example. (Javier, Rob) > - added copyright information > > Dimitri Fedrau (3): > iio: humidity: hdc3020: switch to 16bit register defines > dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example > iio: humidity: hdc3020: add threshold events support > > .../bindings/iio/humidity/ti,hdc3020.yaml | 3 + > drivers/iio/humidity/hdc3020.c | 445 ++++++++++++------ > 2 files changed, 312 insertions(+), 136 deletions(-) >
