On Wed, Feb 14, 2024 at 04:31:16PM +0000, Jonathan Cameron wrote: > > > > > + > > > > + dvdd-supply: > > > > + description: | > > > > + an optional regulator that needs to be on to provide DVDD power (Digital > > > > + IO power, 1.8V~AVDD) to the sensor. > > > > + > > > > + mount-matrix: > > > > + description: an optional 3x3 mounting rotation matrix. > > > > + > > > > +required: > > > > + - compatible > > > > + - reg > > > > > > Any power supply that is required for operation should be listed here (even though > > > we can rely on the stub supplies if it isn't in the DT). > > > I used to think this wasn't necessary, so lots of bindings upstream don't yet > > > have it. > > > > By stub supply you mean dummy supply created when the *-supply property is not > > specified in DT? Or something else? > > Ah yes. I got the term wrong. > > > > Because DTC_CHK prints a warning if I make the proerty required in bindings and > > not specify it in DT > > > > arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2b.dtb: magnetometer@1c: 'avdd-supply' is a required property > > from schema $id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml# > > Provide one, or don't worry about that warning. > > Various discussions have taken place on this over time and end > result is bindings should require them to differentiate from power > supplies that are actually optional. Ok. Good to know. :) regards, o. > Jonathan > >
