On Tue, 6 Feb 2024 15:22:29 +0000 Conor Dooley <conor@xxxxxxxxxx> wrote: > On Tue, Feb 06, 2024 at 04:25:01PM +0530, Naresh Solanki wrote: > > Enable the voltage divider to both receive and provide measurement > > services by adding #io-channel-cells. > > > > This is especially valuable in scenarios where an ADC has an analog > > frontend, like a voltage divider, and obtaining its raw value isn't > > interesting. It is desired to get the real voltage before the voltage > > divider. > > > > Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx> > > Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > > Thanks for adding the example. I have one comment about the wording, cos > the last sentence doesn't really make sense without something referring > back to the scenario you describe. > > > --- > > .../devicetree/bindings/iio/afe/voltage-divider.yaml | 11 +++++++++++ > > 1 file changed, 11 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml > > index dddf97b50549..fd3c511e1beb 100644 > > --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml > > +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml > > @@ -39,6 +39,17 @@ properties: > > description: | > > Channel node of a voltage io-channel. > > > > + '#io-channel-cells': > > + description: > > + In addition to consuming the measurement services of a voltage > > + output channel, the voltage divider can act as a provider of > > + measurement services to other devices. This is particularly > > + useful in scenarios wherein an ADC has an analog frontend, > > + such as a voltage divider, and then consuming its raw value > > + isn't interesting. > > > It is desired to get the real voltage > > + before the voltage divider. > > "In this case, the voltage before the divider is desired". > > Perhaps Jonathan can make that change, provided you are okay with it. I've made the change and applied this patch. Given it will only initially be pushed out for 0-day to take a look at it, feel free to shout if you'd prefer different wording from Conor's suggestion. Thanks, Jonathan > > Cheers, > Conor. > > > + const: 1 > > + > > output-ohms: > > description: > > Resistance Rout over which the output voltage is measured. See full-ohms. > > > > base-commit: 99bd3cb0d12e85d5114425353552121ec8f93adc > > -- > > 2.42.0 > >
