On Thu, 8 Feb 2024 11:43:39 +0200
Arturas Moskvinas <arturas.moskvinas@xxxxxxxxx> wrote:
> Use devm_* APIs to enable regulator and to register in IIO infrastructure.
>
> Signed-off-by: Arturas Moskvinas <arturas.moskvinas@xxxxxxxxx>
Don't get the same regulator twice so as automate turning it off.
The devm_regulator_get_enable() call is carefully hiding the
regulator for cases where the driver never accesses it.
Here we need it to read the voltage.
To convert such a case to fully devm managed, use a
devm_add_action_or_reset() and a custom callback.
> ---
> drivers/iio/adc/mcp320x.c | 19 ++-----------------
> 1 file changed, 2 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
> index f3b81798b3c9..4685eed35271 100644
> --- a/drivers/iio/adc/mcp320x.c
> +++ b/drivers/iio/adc/mcp320x.c
> @@ -388,7 +388,6 @@ static int mcp320x_probe(struct spi_device *spi)
> indio_dev->name = spi_get_device_id(spi)->name;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->info = &mcp320x_info;
> - spi_set_drvdata(spi, indio_dev);
>
> device_index = spi_get_device_id(spi)->driver_data;
> chip_info = &mcp320x_chip_infos[device_index];
> @@ -441,31 +440,17 @@ static int mcp320x_probe(struct spi_device *spi)
> if (IS_ERR(adc->reg))
> return PTR_ERR(adc->reg);
Just above here is the first regulator get. Whilst it may work
we should not get it twice as the logic gets confused at the very least.
>
> - ret = regulator_enable(adc->reg);
> + ret = devm_regulator_get_enable(&spi->dev, "vref");
> if (ret < 0)
> return ret;
>
> mutex_init(&adc->lock);
>
> - ret = iio_device_register(indio_dev);
> - if (ret < 0)
> - goto reg_disable;
> -
> - return 0;
> -
> -reg_disable:
> - regulator_disable(adc->reg);
> -
> - return ret;
> + return devm_iio_device_register(&spi->dev, indio_dev);
> }
>
> static void mcp320x_remove(struct spi_device *spi)
> {
> - struct iio_dev *indio_dev = spi_get_drvdata(spi);
> - struct mcp320x *adc = iio_priv(indio_dev);
> -
> - iio_device_unregister(indio_dev);
> - regulator_disable(adc->reg);
> }
Had the change otherwise been ok...
You should be able to remove this function completely now it is empty.
https://elixir.bootlin.com/linux/latest/source/drivers/spi/spi.c#L446
checks it's existence before calling it.
Thanks
Jonathan
>
> static const struct of_device_id mcp320x_dt_ids[] = {
>
> base-commit: 047371968ffc470769f541d6933e262dc7085456
