Hi Peter,
On Tue, 30 Jan 2024 at 17:12, Peter Rosin <peda@xxxxxxxxxx> wrote:
>
> Hi!
>
> 2024-01-30 at 12:18, Naresh Solanki wrote:
> > voltage-divider is always an iio consumer at the same time it is
> > optionally an iio provider.
> > Hence add #io-channel-cells
> > Also update example.
> >
> > Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
> > ---
> > .../bindings/iio/afe/voltage-divider.yaml | 14 +++++++++++++-
> > 1 file changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
> > index dddf97b50549..09f10d7c4e02 100644
> > --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
> > +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
> > @@ -39,6 +39,13 @@ properties:
> > description: |
> > Channel node of a voltage io-channel.
> >
> > + '#io-channel-cells':
> > + description:
> > + In addition to consuming the measurement services of an ADC,
>
> It doesn't really need to be an ADC. Anything with a voltage output
> channel works (in theory). But sure, normally it would be an ADC...
Ack
>
> > + the voltage divider can act as an provider of measurement
>
> a provider
Ack
Will update as:
'#io-channel-cells':
description:
In addition to consuming the measurement services of an a voltage output
channel the voltage divider can act as a provider of measurement
services to other devices.
const: 1
Regards,
Naresh
>
> Cheers,
> Peter
>
> > + services to other devices.
> > + const: 1
> > +
> > output-ohms:
> ...
