Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ASM330LHHXG1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On Wed, 24 Jan 2024 11:52:33 +0100
> Lorenzo Bianconi <lorenzo@xxxxxxxxxx> wrote:
> 
> > Add support to STM ASM330LHHXG1 (accelerometer and gyroscope) Mems
> > sensor.
> > The ASM330LHHXG1 sensor can use ASM330LHHX as fallback device since it
> > implements all the ASM330LHHXG1 features currently implemented in
> > st_lsm6dsx.
> > 
> > Link: https://www.st.com/resource/en/datasheet/asm330lhhxg1.pdf
> Datasheet:
> > Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> 
> Hi Lorenzo.
> 
> A few comments inline.  Mostly about make it less noisy to
> add additional devices in future.
> 
> > ---
> >  drivers/iio/imu/st_lsm6dsx/Kconfig            |  4 +-
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h       | 48 ++++++++++---------
> >  .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    |  2 +-
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  |  6 ++-
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c   |  5 ++
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c   |  5 ++
> >  6 files changed, 43 insertions(+), 27 deletions(-)
> > 
> > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
> > index 5865a295a4df..645039edd606 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig
> > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
> > @@ -14,8 +14,8 @@ config IIO_ST_LSM6DSX
> >  	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
> >  	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr,
> >  	  lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx,
> > -	  lsm6dsv, lsm6dsv16x, lsm6dso16is, ism330is, asm330lhb, lsm6dst
> > -	  and the accelerometer/gyroscope of lsm9ds1.
> > +	  lsm6dsv, lsm6dsv16x, lsm6dso16is, ism330is, asm330lhb, asm330lhhxg1,
> > +	  lsm6dst and the accelerometer/gyroscope of lsm9ds1.
> 
> I think it is worth a precursor to reformat this into a one entry per line
> list so that changes become less noisy (and easier to deal with merge conflicts)
> There are some examples of lists in drivers/hid/Kconfig and they look
> find in menuconfig etc.
> 
> If I were not requesting other changes I'd have suggested this as a follow up
> patch but given you are going to be respinning again, it would be neater
> as a precursor!

ack, I will fix it in v2.

> 
> 
> >  
> >  	  To compile this driver as a module, choose M here: the module
> >  	  will be called st_lsm6dsx.
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > index c19237717e81..78d12d3c2759 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > @@ -15,29 +15,30 @@
> >  #include <linux/iio/iio.h>
> >  #include <linux/regulator/consumer.h>
> >  
> > -#define ST_LSM6DS3_DEV_NAME	"lsm6ds3"
> > -#define ST_LSM6DS3H_DEV_NAME	"lsm6ds3h"
> > -#define ST_LSM6DSL_DEV_NAME	"lsm6dsl"
> > -#define ST_LSM6DSM_DEV_NAME	"lsm6dsm"
> > -#define ST_ISM330DLC_DEV_NAME	"ism330dlc"
> > -#define ST_LSM6DSO_DEV_NAME	"lsm6dso"
> > -#define ST_ASM330LHH_DEV_NAME	"asm330lhh"
> > -#define ST_LSM6DSOX_DEV_NAME	"lsm6dsox"
> > -#define ST_LSM6DSR_DEV_NAME	"lsm6dsr"
> > -#define ST_LSM6DS3TRC_DEV_NAME	"lsm6ds3tr-c"
> > -#define ST_ISM330DHCX_DEV_NAME	"ism330dhcx"
> > -#define ST_LSM9DS1_DEV_NAME	"lsm9ds1-imu"
> > -#define ST_LSM6DS0_DEV_NAME	"lsm6ds0"
> > -#define ST_LSM6DSRX_DEV_NAME	"lsm6dsrx"
> > -#define ST_LSM6DST_DEV_NAME	"lsm6dst"
> > -#define ST_LSM6DSOP_DEV_NAME	"lsm6dsop"
> > -#define ST_ASM330LHHX_DEV_NAME	"asm330lhhx"
> > -#define ST_LSM6DSTX_DEV_NAME	"lsm6dstx"
> > -#define ST_LSM6DSV_DEV_NAME	"lsm6dsv"
> > -#define ST_LSM6DSV16X_DEV_NAME	"lsm6dsv16x"
> > -#define ST_LSM6DSO16IS_DEV_NAME	"lsm6dso16is"
> > -#define ST_ISM330IS_DEV_NAME	"ism330is"
> > -#define ST_ASM330LHB_DEV_NAME	"asm330lhb"
> > +#define ST_LSM6DS3_DEV_NAME		"lsm6ds3"
> > +#define ST_LSM6DS3H_DEV_NAME		"lsm6ds3h"
> > +#define ST_LSM6DSL_DEV_NAME		"lsm6dsl"
> > +#define ST_LSM6DSM_DEV_NAME		"lsm6dsm"
> > +#define ST_ISM330DLC_DEV_NAME		"ism330dlc"
> > +#define ST_LSM6DSO_DEV_NAME		"lsm6dso"
> > +#define ST_ASM330LHH_DEV_NAME		"asm330lhh"
> > +#define ST_LSM6DSOX_DEV_NAME		"lsm6dsox"
> > +#define ST_LSM6DSR_DEV_NAME		"lsm6dsr"
> > +#define ST_LSM6DS3TRC_DEV_NAME		"lsm6ds3tr-c"
> > +#define ST_ISM330DHCX_DEV_NAME		"ism330dhcx"
> > +#define ST_LSM9DS1_DEV_NAME		"lsm9ds1-imu"
> > +#define ST_LSM6DS0_DEV_NAME		"lsm6ds0"
> > +#define ST_LSM6DSRX_DEV_NAME		"lsm6dsrx"
> > +#define ST_LSM6DST_DEV_NAME		"lsm6dst"
> > +#define ST_LSM6DSOP_DEV_NAME		"lsm6dsop"
> > +#define ST_ASM330LHHX_DEV_NAME		"asm330lhhx"
> > +#define ST_LSM6DSTX_DEV_NAME		"lsm6dstx"
> > +#define ST_LSM6DSV_DEV_NAME		"lsm6dsv"
> > +#define ST_LSM6DSV16X_DEV_NAME		"lsm6dsv16x"
> > +#define ST_LSM6DSO16IS_DEV_NAME		"lsm6dso16is"
> > +#define ST_ISM330IS_DEV_NAME		"ism330is"
> > +#define ST_ASM330LHB_DEV_NAME		"asm330lhb"
> > +#define ST_ASM330LHHXG1_DEV_NAME	"asm330lhhxg1"
> 
> Too much noise. I don't care if they are all aligned the same.
> If you really want to do this, break it out to a precursor patch.
> I'd just have one entry with a different indent :)

ack, I will fix it in v2.
> 
> 
> >  
> >  enum st_lsm6dsx_hw_id {
> >  	ST_LSM6DS3_ID = 1,
> > @@ -63,6 +64,7 @@ enum st_lsm6dsx_hw_id {
> >  	ST_LSM6DSO16IS_ID,
> >  	ST_ISM330IS_ID,
> >  	ST_ASM330LHB_ID,
> > +	ST_ASM330LHHXG1_ID,
> >  	ST_LSM6DSX_MAX_ID,
> >  };
> >  
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> > index 066fe561c5e8..5d9539822ec6 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> > @@ -15,7 +15,7 @@
> >   * value of the decimation factor and ODR set for each FIFO data set.
> >   *
> >   * LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/
> > - * LSM6DST/LSM6DSOP/LSM6DSTX/LSM6DSV/ASM330LHB:
> > + * LSM6DST/LSM6DSOP/LSM6DSTX/LSM6DSV/ASM330LHB/ASM330LHHXG1:
> 
> A list here as well would help.

ack, I will fix it in v2.

> 
> >   * The FIFO buffer can be configured to store data from gyroscope and
> >   * accelerometer. Each sample is queued with a tag (1B) indicating data
> >   * source (gyroscope, accelerometer, hw timer).
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index b6e6b1df8a61..27ecf2a5d0bc 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -27,7 +27,7 @@
> >   *   - FIFO size: 4KB
> >   *
> >   * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/
> > - *   LSM6DSTX/LSM6DSO16IS/ISM330IS:
> > + *   LSM6DSTX/LSM6DSO16IS/ISM330IS/ASM330LHHXG1:
> 
> Another place where reformatting as a list would make adding new entries less noisy
> + whilst doing that, please fix the ordering to be alphabetical.

ack, I will fix it in v2.

Regards,
Lorenzo

> 
> >   *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416,
> >   *     833
> >   *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
> > @@ -820,6 +820,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> >  				.hw_id = ST_ASM330LHHX_ID,
> >  				.name = ST_ASM330LHHX_DEV_NAME,
> >  				.wai = 0x6b,
> > +			}, {
> > +				.hw_id = ST_ASM330LHHXG1_ID,
> > +				.name = ST_ASM330LHHXG1_DEV_NAME,
> > +				.wai = 0x6b,
> >  			}, {
> >  				.hw_id = ST_LSM6DSTX_ID,
> >  				.name = ST_LSM6DSTX_DEV_NAME,
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> > index 911444ec57c0..cddf41cc0ca9 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> > @@ -134,6 +134,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
> >  		.compatible = "st,asm330lhb",
> >  		.data = (void *)ST_ASM330LHB_ID,
> >  	},
> > +	{
> > +		.compatible = "st,asm330lhhxg1",
> > +		.data = (void *)ST_ASM330LHHXG1_ID,
> > +	},
> >  	{},
> >  };
> >  MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
> > @@ -168,6 +172,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
> >  	{ ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID },
> >  	{ ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID },
> >  	{ ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID },
> > +	{ ST_ASM330LHHXG1_DEV_NAME, ST_ASM330LHHXG1_ID },
> >  	{},
> >  };
> >  MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
> > index f56c170c41a9..c122c8831365 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
> > @@ -129,6 +129,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
> >  		.compatible = "st,asm330lhb",
> >  		.data = (void *)ST_ASM330LHB_ID,
> >  	},
> > +	{
> > +		.compatible = "st,asm330lhhxg1",
> > +		.data = (void *)ST_ASM330LHHXG1_ID,
> > +	},
> >  	{},
> >  };
> >  MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
> > @@ -157,6 +161,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
> >  	{ ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID },
> >  	{ ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID },
> >  	{ ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID },
> > +	{ ST_ASM330LHHXG1_DEV_NAME, ST_ASM330LHHXG1_ID },
> >  	{},
> >  };
> >  MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux