On Fri, 15 Dec 2023 16:18:39 +0100 Nuno Sá <noname.nuno@xxxxxxxxx> wrote: > On Thu, 2023-12-14 at 11:03 -0600, Rob Herring wrote: > > On Thu, Dec 14, 2023 at 05:05:20PM +0100, Nuno Sá wrote: > > > On Thu, 2023-12-14 at 08:16 -0600, Rob Herring wrote: > > > > On Wed, Dec 13, 2023 at 04:02:31PM +0100, Nuno Sa wrote: > > > > > v1: > > > > > > > > > > https://lore.kernel.org/linux-iio/20231204144925.4fe9922f@jic23-huawei/T/#m222f517 > > > > > 5273b81dbfe40b7f0daffcdc67d6cb8ff > > > > > > > > > > v2: > > > > > > > > > > https://lore.kernel.org/r/20231208-dev-iio-backend-v2-0-5450951895e1@xxxxxxxxx > > > > > m > > > > > > > > > > Changes in v3: > > > > > - Patch 1: > > > > > * Use proposed generic schema [1]. Also make it a required property; > > > > > * Improved the commit message. > > > > > - Patch 2: > > > > > * Improved commit message. > > > > > - Patch 4: > > > > > * Namespace all IIO DMAENGINE buffer exports; > > > > > * Removed unrelated new line removal change. > > > > > - Patch 5: > > > > > * Namespace all IIO backend exports. > > > > > - Patch 6: > > > > > * Set backend.h in alphabetical order; > > > > > * Import IIO backend namespace. > > > > > - Patch 7: > > > > > * Don't depend on OF in kbuild anymore; > > > > > * Import IIO backend namespace. > > > > > > > > > > For the bindings patches, I tried not to enter into much details about > > > > > the IIO framework as I think specifics of the implementation don't care > > > > > from the bindings perspective. Hopefully the commit messages are good > > > > > enough. > > > > > > > > > > I'm also aware that patch 1 is not backward compatible but we are > > > > > anyways doing it on the driver side (and on the driver the property is > > > > > indeed required). Anyways, just let me know if making the property > > > > > required is not acceptable (I'm fairly confident no one was using the > > > > > upstream version of the driver and so validating devicetrees for it). > > > > > > > > > > Keeping the block diagram in v3's cover so we don't have to follow links > > > > > to check the one of the typicals setups. > > > > > > > > > > ---------------------------------- > > > > > ---- > > > > > ----------------- > > > > > ------------------ | ----------- ------------ > > > > > ------- FPGA | > > > > > | ADC |------------------------| | AXI ADC |---------| DMA CORE > > > > > |---- > > > > > --| RAM | | > > > > > | (Frontend/IIO) | Serial Data (eg: LVDS) | |(backend)|---------| > > > > > |---- > > > > > --| | | > > > > > | |------------------------| ----------- ------------ > > > > > ------- | > > > > > ------------------ ---------------------------------- > > > > > ---- > > > > > ----------------- > > > > > > > > Why doesn't axi-adc just have an io-channels property to adc? It's the > > > > opposite direction for the link, but it seems more logical to me that > > > > axi-adc depends on adc rather than the other way around. > > > > > > > > > > We are not interested on a single channel but on the complete device. >From the > > > axi- > > > adc point of view, there's not much we could do with the adc channel. I mean, > > > maybe > > > we could still do something but it would be far from ideal (see below). > > > > Will this hold up for everyone? Could there be a backend device that > > handles multiple ADCs? IOW, do you need #io-backend-cells? It's somewhat > > better if we add that up front rather than later and have to treat > > missing as 0 cells. It is also the only way to generically identify the > > providers (well, there's also 'foo-controller' properties, but we've > > gone away from those). > > > > For the axi-adc backend, it's very unlikely. The way the core connects to the > converters is through a serial data interface (LVDS, CMOS or JESD in ADI usecases). > This interface is not really a bus so it's kind of a 1:1 connection. Now, in more > complicated devices (like highly integrated RF transceivers) what we have is that we > have multiple of these cores (one per RX/TX port) connected to the frontend. So, > effectively 1 frontend could have multiple backends. So, yes, your first "doubts" are > not that "crazy" as this is also not the "typical" provider - consumer relationship. > However, for all of what I've said in the previous email, even in these cases, > thinking in these cores as the provider, makes things much more easier to handle. > > However, the above is just ADI usecases. In theory, yes, it can be very possible for > another backend other than axi-adc to have multiple frontends connected so I guess we > can make #io-backend-cells already available in the schema. I'd like ultimately to consider making this work for new instances of dfsdm devices (separately front end ADC that spits out a modulated signal that a host controller then turns into something useful). In those cases we might well see a mix of front ends connected to one backend (at least in theory - not sure anyone would build such thing outside of an eval board). Adding the flexibility from the start would be sensible. So I agree with Rob here. > > For the axi-adc bindings this would be 'const: 0', right? > > > > > > The opposite direction is exactly what we had (look at patch 2) just with another > > > custom property. The problem with that is that we would then need a bidirectional > > > link (we would need to callback into the provider and the provider would need to > > > access the consumer) between consumers and providers and that would be far from > > > optimal. The bidirectional link would exist because if we want to support > > > fundamental > > > things like LVDS/CMOS interface tuning we need to set/get settings from the axi- > > > adc > > > core. And as Jonathan suggested, the real data is captured or sent on the > > > converters > > > (ADC or DACs) and that is why we have the IIO device/interface in there and why > > > we > > > call them "frontends". In ADI usecases, backends are these FPGA cores providing > > > "services" to the "real" high speed converters. To put it in another way, the > > > real > > > converter is the one who knows how to use the axi-adc core and not the other way > > > around. That's also one of the reasons why it would be way more difficult to > > > handle > > > things with the opposite link. That's how we have done it so far and the mess we > > > have > > > out of tree is massive :sweat_smile: We ended up doing raw writes and reads on > > > the > > > axi-adc MMIO registers from the converter driver just because we had to configure > > > or > > > get something from the axi-adc device but the link was backwards. > > > > The direction (for the binding) doesn't really matter. It doesn't > > dictate the direction in the OS. In the ad9467 driver, you can search > > the DT for 'adi,adc-dev' and find the node which matches your node's > > phandle. It's not exactly efficient, but you are doing it once. It would > > also prevent the DT ABI break you are introducing. > > > > Hmm, I think I see your idea. So you mean something like > devm_iio_backend_get_optional() and if not present, then we would look for nodes > having the 'adi,adc-dev' property and look for the one pointing at us... Then, we > would need another API in the backend to look for registered backends matching that > fwnode. Right? > > I mean, I guess this could work but we would already have to start a fresh framework > with API's that are not really meant to be used anymore other than the ad9467 driver > (not devm_iio_backend_get_optional() because sooner or later I think we'll need that > one). We are already breaking ABI in the driver and I'm still fairly confident no one > is really using the upstream driver because it's lacking support for devices and > important features (not even in ADI fork we're using it). > > Anyways, if you still insist on having something like this (and feel more comfortable > in not breaking DT ABI), I can see how this would look like in the next version... See how it looks. If it means removing the need to convince Rob then it's probably easier to write the code than try and talk him around ;) Can happily stick a bit deprecated note next to the binding and the code. > > > > > > > And if there's another consumer in the chain, then a node could > > > > certainly be both an io-channels consumer and producer. > > > > > > > > > > This should also be possible with this architecture. A node can be both a backend > > > (provider) and a consumer and we have an out of tree design that fits this (that > > > I > > > surely want to upstream after the foundations are done). > > > > > > > The architecture of the drivers seems odd to me. It looks similar to > > > > making a phy driver handle all the state and protocol with the host > > > > controller being a backend. > > > > > > In this case, it's not really a controller. It's more like an extension of the > > > device > > > because we need a way to handle the high sample rates this ADCs can do. Then we > > > can > > > also do test tones with the backend which is useful for interface tuning (as > > > mentioned above). > > > > > > To give you a bit more context, I'm adding the generic property because we will > > > have > > > more users for it (from ADI - the next should be the axi-dac core) but STM is > > > also > > > interested in this (likely the next user). > > > > > > Hope this makes it a bit more clear... > > > > Yes, thanks. > > > > I generally ask for 2 users on new common bindings. I've accepted too > > many only to have the 2nd user come in a month later and need additions. > > An ack on the binding from the STM folks would be nice here. And > > Jonathan too. > > > > Olivier, could we get an ack on the bindings patch? Do you also have any idea about > how long it would take for you to send patches so we have another user of the schema? > > On my side, it might very well take a month or so (given we have holidays nearby) as > the axi-dac core is more complex than the axi-adc. Bah it might take less than a > month to have the first version of it posted in the lists but I can't make any > promises. For the driver side of things I'd like at least 2, preferably 3 users before merging. We have more flexibility to rework things as any issues will probably be internal interfaces, but I'd rather wait if we are going to have 3 users within another month or 2. Jonathan > > - Nuno Sá >
