On Wed, 13 Dec 2023 10:09:09 +0100, Mike Looijmans wrote: > Add a driver for generic serial shift register DACs like TI DAC714. > > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx> > > --- > > .../devicetree/bindings/iio/dac/spidac.yaml | 69 +++++++++++++++++++ > 1 file changed, 69 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/dac/spidac.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/iio/dac/spidac.yaml:44:8: [warning] wrong indentation: expected 6 but found 7 (indentation) dtschema/dtc warnings/errors: Documentation/devicetree/bindings/iio/dac/spidac.example.dtb: /example-0/spi/dac@1: failed to match any schema with compatible: ['spidac'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231213090910.25410-1-mike.looijmans@xxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
