On Mon, 11 Dec 2023 20:22:01 +0800 Li peiyu <579lpy@xxxxxxxxx> wrote: > Add support for HDC302x integrated capacitive based relative > humidity (RH) and temperature sensor. > This driver supports reading values, reading the maximum and > minimum of values and controlling the integrated heater of > the sensor. > > Signed-off-by: Li peiyu <579lpy@xxxxxxxxx> Series applied to the togreg branch of iio.git but initially that's just pushed out as testing to let 0-day see if it can find anything we missed. Thanks! Jonathan > --- > changes in v6: > sensor driver: > - Drop offset for humidity channel. > - Use put_unaligned_be16 to assign the 14-bit heater value. > - Remove error message if devm_action_or_reset() fails. > - Add eror message if devm_iio_device_register() fails. > dt-bindings: > - remove items before "- const: ti,hdc3020". > - add vdd-supply to required. > changes in v5: > iio ABI: > - Document _TROUGH as an info element. > sensor driver: > - Correct heater enable/disable commands > - Rearrang header files in alphabetical order. > - Change .info_mask_separate to BIT(IIO_CHAN_INFO_RAW). > - Add details to mutex comment. > - Add error handling for chan->type in read_raw call. > - Remove error message for devm_iio_device_register. > changes in v4: > iio core: > - Add an IIO_CHAN_INFO_TROUGH modifier for minimum values. > iio ABI: > - Document the new _TROUGH modifier. > sensor driver: > - Add MAINTAINERS. > - Use new IIO_CHAN_INFO_TROUGH modifier. > - Support the complete heater range. > - Remove measurement values from the data structure. > - Use guard(mutex)(...), make the code simpler > - Removed buffer mode and direct mode conversion code > - Minor coding-style fixes. > dt-bindings: > - removed unnecessary example > - add vdd-supply to the example > changes in v3: > sensor driver: > - Removed the custom ABI > - Give up calculating values in the driver > - Use read_avail callback to get available parameters > - Changed the scope of the lock to make the code more concise > - Fixed the code format issue > dt-bindings: > - Use a fallback compatible > changes in v2: > sensor driver: > - Added static modification to global variables > - change the methord to read peak value > dt-bindings: > - change the maintainers to me. > - hdc3020,hdc3021,hdc3022 are compatible,I've changed the dirver. > - change the node name to humidity-sensor. > > --- > Javier Carrasco (2): > iio: core: introduce trough modifier for minimum values > iio: ABI: document temperature and humidity peak/trough raw attributes > > Li peiyu (2): > dt-bindings: iio: humidity: Add TI HDC302x support > iio: humidity: Add driver for TI HDC302x humidity sensors > > Documentation/ABI/testing/sysfs-bus-iio | 13 +- > .../bindings/iio/humidity/ti,hdc3020.yaml | 55 +++ > MAINTAINERS | 8 + > drivers/iio/humidity/Kconfig | 12 + > drivers/iio/humidity/Makefile | 1 + > drivers/iio/humidity/hdc3020.c | 473 +++++++++++++++++++++ > drivers/iio/industrialio-core.c | 1 + > include/linux/iio/types.h | 1 + > 8 files changed, 563 insertions(+), 1 deletion(-) > --- > base-commit: 33cc938e65a98f1d29d0a18403dbbee050dcad9a > > Best regards,
