Add BMP390 device ID to the supported IDs on bmp380 sensor family Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx> diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index deb336781b26..c6c761e84006 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -13,6 +13,7 @@ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf + * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp390-ds002.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf * * Notice: @@ -1225,7 +1226,7 @@ static int bmp380_chip_config(struct bmp280_data *data) static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 }; static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128}; -static const u8 bmp380_chip_ids[] = { BMP380_CHIP_ID }; +static const u8 bmp380_chip_ids[] = { BMP380_CHIP_ID, BMP390_CHIP_ID }; const struct bmp280_chip_info bmp380_chip_info = { .id_reg = BMP380_REG_ID, diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index a230fcfc4a85..2971bf58f802 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -292,6 +292,7 @@ #define BMP580_CHIP_ID_ALT 0x51 #define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 +#define BMP390_CHIP_ID 0x60 #define BME280_CHIP_ID 0x60 #define BMP280_SOFT_RESET_VAL 0xB6 -- 2.42.0
