On Sun, 15 Oct 2023 00:12:52 +0300 Ivan Mikhaylov <fr0st61te@xxxxxxxxx> wrote: > Add Maxim max34408/34409 ADC driver and yaml for it. Until now it > supports only current monitioring function without overcurrent > threshold/delay, shutdown delay configuration, alert interrupt. > > Changes from v1: > - minor changes from Rob's comments for yaml > - add ena, shtdn and make 4 inputs for R sense from Jonathan's comments for yaml > - add _REG suffix and make prefix for bitmasks and statuses > - add SCALE/OFFSET instead of AVG/PROCESSED from Jonathan and > Lars-Peter comments > - add chip data from Jonathan and Lars-Peter comments > - minor changes from Lars-Peter and Jonathan comments for driver > > Changes from v2: > - add channels into hardware description into yaml > - add rsense property per channel > - rename pins for shtdn and ena pins > - make one array for input_rsense values > > Changes from v3: > - change *_34408_OCT3 and 4 to *_34409_OCT3 and 4 > - change of_property_read_u32 to fwnode family calls > - add i2c dev table > - change of_match_device to i2c_of_match_device > - change match->data to i2c_get_match_data > > Changes from v4: > - minor changes in yaml > > Changes from v5: > - name and minor changes to properties in yaml from Rob's comments > - shtdn-enable-gpios -> powerdown-status-gpios from Krzysztof and > Jonathan comments in yaml > - minor changes to driver > > Ivan Mikhaylov (2): > dt-bindings: adc: provide max34408/9 device tree binding document > iio: adc: Add driver support for MAX34408/9 > > .../bindings/iio/adc/maxim,max34408.yaml | 139 +++++++++ > drivers/iio/adc/Kconfig | 11 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/max34408.c | 276 ++++++++++++++++++ > 4 files changed, 427 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml > create mode 100644 drivers/iio/adc/max34408.c > Series applied to the togreg branch of iio.git and pushed out as testing. We are very late in the cycle, so this is probably destined for 6.8 Jonathan
