Re: [PATCH -next v2 3/3] iio: adc: at91_adc: Simplify with dev_err_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 26 Aug 2023 10:29:22 +0800
Jinjie Ruan <ruanjinjie@xxxxxxxxxx> wrote:

> Use the dev_err_probe() helper to simplify error handling during probe.
> This also handle scenario, when EDEFER is returned and useless error
> is printed.
> 
> Signed-off-by: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
As I've asked for other changes so there will probably be another version
anyway - a few trivial comments inline.  Mostly you've hit the right balance
on line breaks, but there are a few more I'd like to see with the aim of
not going any longer than 80 chars than is necessary.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/at91_adc.c | 65 ++++++++++++++------------------------
>  1 file changed, 24 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> index 2ac1b64f0fb7..a49f7021c73f 100644
> --- a/drivers/iio/adc/at91_adc.c
> +++ b/drivers/iio/adc/at91_adc.c
> @@ -1013,28 +1013,25 @@ static int at91_adc_probe(struct platform_device *pdev)
>  
>  	st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
>  
> -	if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
> -		dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n");
> -		return -EINVAL;
> -	}
> +	if (of_property_read_u32(node, "atmel,adc-channels-used", &prop))
> +		return dev_err_probe(&idev->dev, -EINVAL,
> +				     "Missing adc-channels-used property in the DT.\n");
>  	st->channels_mask = prop;
>  
>  	st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
>  
> -	if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
> -		dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
> -		return -EINVAL;
> -	}
> +	if (of_property_read_u32(node, "atmel,adc-startup-time", &prop))
> +		return dev_err_probe(&idev->dev, -EINVAL,
> +				     "Missing adc-startup-time property in the DT.\n");
>  	st->startup_time = prop;
>  
>  	prop = 0;
>  	of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop);
>  	st->sample_hold_time = prop;
>  
> -	if (of_property_read_u32(node, "atmel,adc-vref", &prop)) {
> -		dev_err(&idev->dev, "Missing adc-vref property in the DT.\n");
> -		return -EINVAL;
> -	}
> +	if (of_property_read_u32(node, "atmel,adc-vref", &prop))
> +		return dev_err_probe(&idev->dev, -EINVAL,
> +				     "Missing adc-vref property in the DT.\n");
>  	st->vref_mv = prop;
>  
>  	st->res = st->caps->high_res_bits;
> @@ -1069,7 +1066,6 @@ static int at91_adc_probe(struct platform_device *pdev)
>  	if (IS_ERR(st->reg_base))
>  		return PTR_ERR(st->reg_base);
>  
> -
>  	/*
>  	 * Disable all IRQs before setting up the handler
>  	 */
> @@ -1084,26 +1080,18 @@ static int at91_adc_probe(struct platform_device *pdev)
>  		ret = devm_request_irq(&pdev->dev, st->irq,
>  				       at91_adc_rl_interrupt, 0,
>  				       pdev->dev.driver->name, idev);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
> -		return ret;
> -	}
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret, "Failed to allocate IRQ.\n");
>  
>  	st->clk = devm_clk_get_enabled(&pdev->dev, "adc_clk");
> -	if (IS_ERR(st->clk)) {
> -		dev_err(&pdev->dev,
> -			"Could not prepare or enable the clock.\n");
> -		ret = PTR_ERR(st->clk);
> -		return ret;
> -	}
> +	if (IS_ERR(st->clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(st->clk),
> +				     "Could not prepare or enable the clock.\n");
>  
>  	st->adc_clk = devm_clk_get_enabled(&pdev->dev, "adc_op_clk");
> -	if (IS_ERR(st->adc_clk)) {
> -		dev_err(&pdev->dev,
> -			"Could not prepare or enable the ADC clock.\n");
> -		ret = PTR_ERR(st->adc_clk);
> -		return ret;
> -	}
> +	if (IS_ERR(st->adc_clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(st->adc_clk),
> +				     "Could not prepare or enable the ADC clock.\n");
>  
>  	/*
>  	 * Prescaler rate computation using the formula from the Atmel's
> @@ -1119,10 +1107,8 @@ static int at91_adc_probe(struct platform_device *pdev)
>  
>  	prsc = (mstrclk / (2 * adc_clk)) - 1;
>  
> -	if (!st->startup_time) {
> -		dev_err(&pdev->dev, "No startup time available.\n");
> -		return -EINVAL;
> -	}
> +	if (!st->startup_time)
> +		return dev_err_probe(&pdev->dev, -EINVAL, "No startup time available.\n");

Add a line break before the "

>  	ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz);
>  
>  	/*
> @@ -1147,10 +1133,8 @@ static int at91_adc_probe(struct platform_device *pdev)
>  
>  	/* Setup the ADC channels available on the board */
>  	ret = at91_adc_channel_init(idev);
> -	if (ret < 0) {
> -		dev_err(&pdev->dev, "Couldn't initialize the channels.\n");
> -		return ret;
> -	}
> +	if (ret < 0)
> +		return dev_err_probe(&pdev->dev, ret, "Couldn't initialize the channels.\n");

Line break before "

>  
>  	init_waitqueue_head(&st->wq_data_avail);
>  	mutex_init(&st->lock);
> @@ -1162,10 +1146,9 @@ static int at91_adc_probe(struct platform_device *pdev)
>  	 */
>  	if (!st->touchscreen_type) {
>  		ret = at91_adc_buffer_init(idev);
> -		if (ret < 0) {
> -			dev_err(&pdev->dev, "Couldn't initialize the buffer.\n");
> -			return ret;
> -		}
> +		if (ret < 0)
> +			return dev_err_probe(&pdev->dev, ret,
> +					     "Couldn't initialize the buffer.\n");
>  
>  		ret = at91_adc_trigger_init(idev);
>  		if (ret < 0) {




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux