[PATCH v5 16/37] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is
not a property of the SoC, it is a property of the particular board
(even if it is standard and unified between all devices). Move these
interrupt specifications to the board files.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts                | 4 ++++
 arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts | 4 ++++
 arch/arm/boot/dts/qcom/qcom-msm8960.dtsi                   | 2 --
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 4641b4f2195d..43149c90c4fc 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -88,6 +88,10 @@ clk-pins {
 	};
 };
 
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_keypad {
 	linux,keymap = <
 		MATRIX_KEY(0, 0, KEY_VOLUMEUP)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c287498..9e203164beb6 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -84,6 +84,10 @@ clk-pins {
 	};
 };
 
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
 		compatible = "qcom,rpm-pm8921-regulators";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index ea2d961b266b..f1267c83d67a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -266,8 +266,6 @@ ssbi@500000 {
 
 			pm8921: pmic {
 				compatible = "qcom,pm8921";
-				interrupt-parent = <&msmgpio>;
-				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				#address-cells = <1>;
-- 
2.39.2




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux