The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is
not a property of the SoC, it is a property of the particular board
(even if it is standard and unified between all devices). Move these
interrupt specifications to the board files.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi | 4 ++++
arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi | 1 -
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index dac3aa793f71..b782ff0d16cd 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -76,6 +76,10 @@ reset-out-pins {
};
};
+&pm8018 {
+ interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&pm8018_gpio {
usb_vbus_5v_pins: usb-vbus-5v-state {
pins = "gpio4";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index c4cfbdbcdf14..373d9425b8bd 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -265,7 +265,6 @@ qcom,ssbi@500000 {
pm8018: pmic {
compatible = "qcom,pm8018", "qcom,pm8921";
- interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
--
2.39.2
