On Mon, Aug 14, 2023 at 02:10:10PM +0200, Marcus Folkesson wrote:
> Microchip does have many similar chips, add support for those.
>
> The new supported chips are:
> - microchip,mcp3910
> - microchip,mcp3912
> - microchip,mcp3913
> - microchip,mcp3914
> - microchip,mcp3918
> - microchip,mcp3919
...
> struct {
> - u32 channels[MCP3911_NUM_CHANNELS];
> + u32 channels[MCP39XX_MAX_NUM_CHANNELS];
> s64 ts __aligned(8);
Can we actually have the __aligned_s64 defined?
Rhetorical... Let me send a patch for that as it's not related to this series.
> } scan;
...
> + /* Enable offset*/
Missing space.
...
> +static int mcp3911_get_osr(struct mcp3911 *adc, u32 *val)
> +{
> + int ret, osr;
> +
> + ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
> + if (ret)
> + return ret;
> +
> + osr = FIELD_GET(MCP3911_CONFIG_OSR, *val);
> + *val = 32 << osr;
> + return ret;
return 0;
> +}
...
> {
> - struct device *dev = &adc->spi->dev;
> u32 regval;
> int ret;
> + struct device *dev = &adc->spi->dev;
Stray change.
...
> + /* Disable offset to ignore any old values in offset register*/
Missing space.
...
> + u32 regval;
> + int ret;
> + struct device *dev = &adc->spi->dev;
Make the longer line first.
...
> + dev_dbg(dev,
> + "use internal voltage reference (1.2V)\n");
One line.
...
> + dev_dbg(dev,
> + "use crystal oscillator as clocksource\n");
Ditto.
(This is the outcome of the exercise with temporary dev variable)
...
> + ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
> if (ret)
> - return ret;
> + device_property_read_u32(dev, "device-addr", &adc->dev_addr);
> + if (adc->dev_addr > 3) {
> + dev_err_probe(dev, -EINVAL,
> + "invalid device address (%i). Must be in range 0-3.\n",
> + adc->dev_addr);
Missing return?
return dev_err_probe(...);
> + }
> + dev_dbg(dev, "use device address %i\n", adc->dev_addr);
--
With Best Regards,
Andy Shevchenko
