The following changes since commit 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5: Linux 6.5-rc1 (2023-07-09 13:53:13 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.6a for you to fetch changes up to 14b7447cec15ee8dfdfe0da66ba1e280ded7e00a: Documentation: ABI: testing: admv8818: add bypass (2023-08-08 09:51:06 +0100) ---------------------------------------------------------------- 1st set of IIO new device support, features and cleanup for 6.6 New device support * adi,ad8366 - Add support for the HMC792 digital attenuator (mostly chip specific data) * alwinner,sun20i-gpadc - New driver for the integrated ADC on a number of allwinner SoCs including dt-binding documentation. * microchip,mcp4728 - New driver for this quad channel DAC. Includes dt-bindings. * miramems, da280 - Add ID for DA217 accelerometer which is compatible with the da280. * murata,irs-d200 - New driver for this passive infrared sensor typically used for human detection. Includes bindings and a few pieces of new ABI to cover a case of needing to count a number of repeats of an event before reporting it. * rohm,bu27008 - Add initial support for the BU27010 RGB + flickering sensor to this driver. Substantial refactoring was needed to enable this. Features * adi,admv8818 - Add mode that bypasses the input and output filters. * amlogic,meson - Support control of the MUX on channel 7, exposed as multiple channels. - Support channel labels. * sensirion,scd4x - Add pressure compensation. Controlled via an 'output' pressure channel. * ti,lmp92040 - Add IIO buffered supported (read via chrdev). * vishay,vcnl4000 - Add proximity interrupt support for vcnl4200. - Add proximity integration time control for vcnl4200. - Add illuminance integration time control for vcnl4040 and vcnl4200. - Add calibration bias, proximity and illuminance event period, and oversampling ratio control for vcnl4040 and vncl4200. Cleanup and minor fixes * core - Tidy up handling of set_trigger_state() callback return values to consistently assume no positive return values. - Use min() rather than min_t() in a case where types were clearly the same. - Drop some else statements that follow continue with a loop or a returns. - White space and comment format cleanup. - Use sysfs_match_string() helper to improve readability. - Use krealloc_array() to make it explicit a krealloc is for an array of structures, not just one. * tools - Tidy up potential overflow in array index. * tree wide - Fix up includes for DT related headers. - Drop some error prints in places where as similar error message is printed by the function being called. - Tidy up handling of return value from platform_get_irq() to no longer take into account 0 as a value that might be returned. Similar for fwnode_irq_get(). * adi,ad7192 - Add missing error check and improved debug logging. - Use sysfs_emit_at() rather than open coded variant. * adi,adis16475 - Drop unused scan element enum entries. - Specify that a few more devices support burst32 mode. * adi,admv1013 - Enable all required regulators and document as required in the dt-binding. * adi,admv1014 - Make all regulators required in the dt-binding as the device needs them all enabled. * adi,adxl313 - Fix wrong enum values being used in the i2c_device_id table. - Use i2c_get_match_data() to reduce open coded handling of the various id tables. * allwinner,gpadc - Make the kconfig text more specific to make space for separate drivers for other Allwinner devices. * amlogic,meson - Drop unused timestamp channels as no buffer support. - Various minor reorganizations to enable addition of support channel 7 MUX. - Initialize some default values to account for potential previous user since reboot. * qcom,spmi-adc5 - Add ADC5_GPIO2_100K_PU support to driver to line up with bindings. * qcom,spmi-adc7 - Use predefined channel ID definitions rather than values. * invensense, common - Factor out the timestamp handling to a module used by both mpu6050 and icm42600. * invensense,mpu6050 - Read as many FIFO elements as possible in one bus access. * men,s188 - Drop redundant initialization of driver owner field. * microchip,mcp4018 and mcp4531 - Use i2c_get_match_data() instead of open coding. Includes making the data format the same for the i2c_device_id and firmware match tables. * semtech,sx9310 - dt-bindings: Add reference to IIO schema to provide the label property. * semtech,sx9324 - dt-bindings: Add reference to IIO schema to provide the label property. * st,stm32-adc - Use devm_platform_get_and_ioremap_resource() instead of open coded version. * st,stm-lptimer-trigger - Drop setting platform drvdata as it wasn't then used. * ti,ads1015 - Fix wrong dt binding description of ti,datarate for some devices. * vishay,vcnl4200 - Move to switch statements for channel type checking to make later additions simpler. ---------------------------------------------------------------- Alisa Roman (1): iio: adc: ad7192: Use sysfs_emit_at Andrea Collamati (2): dt-bindings: iio: dac: add mcp4728.yaml iio: add MCP4728 I2C DAC driver Andrei Coardos (1): iio: trigger: stm32-lptimer-trigger: remove unneeded platform_set_drvdata() Andy Shevchenko (6): iio: core: Use min() instead of min_t() to make code more robust iio: core: Get rid of redundant 'else' iio: core: Improve indentation in a few places iio: core: Use sysfs_match_string() helper iio: core: Switch to krealloc_array() iio: core: Fix issues and style of the comments Antoniu Miclaus (5): dt-bindings: iio: admv1014: make all regs required dt-bindings: iio: admv1013: add vcc regulators drivers: iio: admv1013: add vcc regulators drivers: iio: filter: admv8818: add bypass mode Documentation: ABI: testing: admv8818: add bypass Astrid Rost (8): iio: light: vcnl4000: Add proximity irq for vcnl4200 iio: light: vcnl4000: Add proximity ps_it for vcnl4200 iio: light: vcnl4000: Check type with switch case iio: light: vcnl4000: Add als_it for vcnl4040/4200 iio: light: vcnl4000: add illuminance irq vcnl4040/4200 iio: light: vcnl4000: Add period for vcnl4040/4200 iio: light: vcnl4000: Add oversampling_ratio for 4040/4200 iio: light: vcnl4000: Add calibration bias for 4040/4200 Biju Das (5): iio: accel: adxl355: Simplify probe() iio: accel: adxl313: Fix adxl313_i2c_id[] table iio: accel: adxl313: Use i2c_get_match_data iio: potentiometer: mcp4018: Use i2c_get_match_data() iio: potentiometer: mcp4531: Use i2c_get_match_data() Chenyuan Mi (1): tools: iio: iio_generic_buffer: Fix some integer type and calculation Christophe JAILLET (1): iio: adc: ad7192: Simplify using devm_clk_get_optional_enabled() Dmitry Baryshkov (1): dt-bindings: iio: adc: qcom,spmi-adc7: use predefined channel ids George Stark (9): iio: adc: meson: remove unused timestamp channel iio: adc: meson: move enums declaration before variables declaration iio: adc: meson: move meson_sar_adc_set_chan7_mux routine upper iio: adc: meson: add enum for iio channel numbers iio: adc: meson: add channel labels iio: adc: meson: support reading from channel 7 mux inputs iio: adc: meson: init channels 0,1 input muxes iio: adc: meson: init internal continuous ring counter iio: adc: meson: init voltage control bits Hans de Goede (1): iio: accel: da280: Add support for the DA217 accelerometer Jean-Baptiste Maneyrol (5): iio: imu: inv_icm42600: make timestamp module chip independent iio: move inv_icm42600 timestamp module in common iio: make invensense timestamp module generic iio: imu: inv_mpu6050: use the common inv_sensors timestamp module iio: imu: inv_mpu6050: read the full fifo when processing data Kim Seer Paller (1): iio: amplifiers: ad8366: add support for HMC792A Attenuator Konrad Dybcio (1): iio: adc: qcom-spmi-adc5: Add ADC5_GPIO2_100K_PU Krzysztof Kozlowski (2): dt-bindings: iio: semtech,sx9310: reference common schema for label dt-bindings: iio: semtech,sx9324: reference common schema for label Leonard Göhrs (1): iio: adc: ti-lmp92064: add buffering support Li Zetao (1): iio: adc: men_z188_adc: Remove redundant initialization owner in men_z188_driver Maksim Kiselev (3): iio: adc: Kconfig change description for Allwinner GPADC iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADC dt-bindings: iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADC Marco Felsch (1): dt-bindings: iio: adc: ti,ads1015: fix datarate max value and meaning Markus Burri (1): iio: adi: ad7192: Add error check and more debug log Matti Vaittinen (5): iio: mb1232: relax return value check for IRQ get iio: cdc: ad7150: relax return value check for IRQ get dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor iio: light: bu27008: add chip info iio: light: bd27008: Support BD27010 RGB Ramona Bolboaca (2): iio: imu: adis16475.c: Remove unused enum elements iio: imu: adis16475.c: Add has_burst32 flag to adis16477 devices Roan van Dijk (1): iio: chemical: scd4x: Add pressure compensation Rob Herring (1): iio: adc: Explicitly include correct DT includes Ruan Jinjie (2): iio: adc: Remove redundant dev_err_probe() iio: adc: fix the return value handle for platform_get_irq() Waqar Hameed (4): iio: Make return value check for set_trigger_state() consistent dt-bindings: iio: proximity: Add Murata IRS-D200 iio: Add event enums for running period and count iio: Add driver for Murata IRS-D200 Yangtao Li (1): iio: adc: stm32-adc: Use devm_platform_get_and_ioremap_resource() Documentation/ABI/testing/sysfs-bus-iio | 16 + .../ABI/testing/sysfs-bus-iio-filter-admv8818 | 2 + .../iio/adc/allwinner,sun20i-d1-gpadc.yaml | 91 ++ .../devicetree/bindings/iio/adc/ti,ads1015.yaml | 15 +- .../bindings/iio/dac/microchip,mcp4728.yaml | 49 ++ .../bindings/iio/frequency/adi,admv1013.yaml | 60 ++ .../bindings/iio/frequency/adi,admv1014.yaml | 8 + .../bindings/iio/light/rohm,bu27010.yaml | 49 ++ .../bindings/iio/proximity/murata,irsd200.yaml | 60 ++ .../bindings/iio/proximity/semtech,sx9310.yaml | 5 +- .../bindings/iio/proximity/semtech,sx9324.yaml | 5 +- drivers/iio/accel/adxl313_i2c.c | 8 +- drivers/iio/accel/adxl355_i2c.c | 15 +- drivers/iio/accel/adxl372_spi.c | 1 - drivers/iio/accel/bma180.c | 1 - drivers/iio/accel/da280.c | 11 +- drivers/iio/accel/kxsd9-spi.c | 1 - drivers/iio/accel/mma8452.c | 2 +- drivers/iio/adc/Kconfig | 12 +- drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ab8500-gpadc.c | 6 +- drivers/iio/adc/ad7124.c | 2 +- drivers/iio/adc/ad7192.c | 31 +- drivers/iio/adc/ad9467.c | 2 +- drivers/iio/adc/adi-axi-adc.c | 3 +- drivers/iio/adc/at91_adc.c | 1 - drivers/iio/adc/bcm_iproc_adc.c | 4 +- drivers/iio/adc/cc10001_adc.c | 1 - drivers/iio/adc/imx7d_adc.c | 2 +- drivers/iio/adc/ina2xx-adc.c | 2 +- drivers/iio/adc/lpc32xx_adc.c | 4 +- drivers/iio/adc/men_z188_adc.c | 1 - drivers/iio/adc/meson_saradc.c | 243 +++++- drivers/iio/adc/npcm_adc.c | 4 +- drivers/iio/adc/palmas_gpadc.c | 7 +- drivers/iio/adc/qcom-spmi-adc5.c | 2 + drivers/iio/adc/qcom-spmi-iadc.c | 1 - drivers/iio/adc/rockchip_saradc.c | 3 +- drivers/iio/adc/sc27xx_adc.c | 1 - drivers/iio/adc/spear_adc.c | 4 +- drivers/iio/adc/stm32-adc-core.c | 5 +- drivers/iio/adc/stm32-dfsdm-adc.c | 3 +- drivers/iio/adc/stm32-dfsdm-core.c | 4 +- drivers/iio/adc/stmpe-adc.c | 2 +- drivers/iio/adc/sun20i-gpadc-iio.c | 276 ++++++ drivers/iio/adc/sun4i-gpadc-iio.c | 1 - drivers/iio/adc/ti-lmp92064.c | 53 ++ drivers/iio/adc/ti_am335x_adc.c | 1 - drivers/iio/amplifiers/Kconfig | 1 + drivers/iio/amplifiers/ad8366.c | 15 + drivers/iio/cdc/ad7150.c | 10 +- drivers/iio/chemical/scd4x.c | 79 +- drivers/iio/common/Kconfig | 1 + drivers/iio/common/Makefile | 1 + drivers/iio/common/inv_sensors/Kconfig | 7 + drivers/iio/common/inv_sensors/Makefile | 6 + .../inv_sensors/inv_sensors_timestamp.c} | 100 ++- drivers/iio/dac/Kconfig | 11 + drivers/iio/dac/Makefile | 1 + drivers/iio/dac/mcp4728.c | 618 +++++++++++++ drivers/iio/filter/admv8818.c | 65 +- drivers/iio/frequency/admv1013.c | 14 + drivers/iio/imu/adis16475.c | 5 +- drivers/iio/imu/inv_icm42600/Kconfig | 1 + drivers/iio/imu/inv_icm42600/Makefile | 1 - drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 35 +- drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 33 +- drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 14 +- drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 35 +- .../iio/imu/inv_icm42600/inv_icm42600_timestamp.h | 85 -- drivers/iio/imu/inv_mpu6050/Kconfig | 1 + drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 33 +- drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 22 +- drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 102 +-- drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 6 +- drivers/iio/industrialio-core.c | 161 ++-- drivers/iio/industrialio-event.c | 2 + drivers/iio/industrialio-trigger.c | 2 +- drivers/iio/light/cm3605.c | 2 +- drivers/iio/light/rohm-bu27008.c | 630 +++++++++++--- drivers/iio/light/vcnl4000.c | 710 +++++++++++++-- drivers/iio/potentiometer/mcp4018.c | 35 +- drivers/iio/potentiometer/mcp4531.c | 139 +-- drivers/iio/proximity/Kconfig | 12 + drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/irsd200.c | 958 +++++++++++++++++++++ drivers/iio/proximity/isl29501.c | 2 +- drivers/iio/proximity/mb1232.c | 7 +- drivers/iio/temperature/mlx90614.c | 2 +- drivers/iio/trigger/stm32-lptimer-trigger.c | 9 +- include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h | 88 +- include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h | 124 +-- include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h | 50 +- include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h | 22 +- include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h | 22 +- include/linux/iio/common/inv_sensors_timestamp.h | 95 ++ include/linux/iio/types.h | 2 + tools/iio/iio_generic_buffer.c | 17 +- 98 files changed, 4535 insertions(+), 940 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml create mode 100644 Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml create mode 100644 Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml create mode 100644 drivers/iio/adc/sun20i-gpadc-iio.c create mode 100644 drivers/iio/common/inv_sensors/Kconfig create mode 100644 drivers/iio/common/inv_sensors/Makefile rename drivers/iio/{imu/inv_icm42600/inv_icm42600_timestamp.c => common/inv_sensors/inv_sensors_timestamp.c} (56%) create mode 100644 drivers/iio/dac/mcp4728.c delete mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_timestamp.h create mode 100644 drivers/iio/proximity/irsd200.c create mode 100644 include/linux/iio/common/inv_sensors_timestamp.h
