[PATCH v3 0/3] Support ROHM BU27010 RGBC sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Support ROHM BU27010 RGBC + flickering sensor.

Following description copied from commit log:

> The ROHM BU27010 is an RGBC sensor with a flickering detection FIFO. The
> RGBC+IR sensor functionality is largely similar to what the BU27008 has.
> There are some notable things though:
>  - gain setting is once again new and exotic. Now, there is 6bit gain
>    setting where 4 of the bits are common to all channels and 2 bits
>    can be configured separately for each channel. The BU27010 has
>    similar "1X on other channels vs 2X on IR when selector is 0x0"
>    gain design as BU27008 had. So, we use same gain setting policy for
>    BU27010 as we did for BU27008 - driver sets same gain selector for
>    all channels but shows the gains separately for all channels so users
>    can (at least in theory) detect this 1X vs 2X madness...
>  - BU27010 has suffled all the control register bitfields to new
>    addresses and bit positions while still keeping the register naming
>    same.
>  - Some more power/reset control is added.
>  - FIFO for "flickering detection" is added.
>
> The control register suffling made this slightly nasty. Still, it is
> easier for maintenance perspective to add the BU27010 support in BU27008
> driver because - even though the bit positions/addresses were changed -
> most of the driver structure can be re-used. Writing own driver for
> BU27010 would mean plenty of duplicate code albeit a tad more clarity.

Revision history:

v2 => v3:
 - minor styling and added comment
 - rebased on iio-fixes-for-6.5a which contains prerequisite patches
v1 => v2:
 - make vdd-supply required binding.
 - Some re-ordering for struct member init.
 - Some re-ordering for code to get rid of function declarations.
 - Tidy up the mess from patch 2/3.
   - Refactor parts from 3/3 to 2/3.
   - Clean-up commented out code and tidy things in general.


---

Matti Vaittinen (3):
  dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor
  iio: light: bu27008: add chip info
  iio: light: bd27008: Support BD27010 RGB

 .../bindings/iio/light/rohm,bu27010.yaml      |  49 ++
 drivers/iio/light/rohm-bu27008.c              | 630 ++++++++++++++----
 2 files changed, 565 insertions(+), 114 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml


base-commit: 8a4629055ef55177b5b63dab1ecce676bd8cccdd
-- 
2.40.1


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux