Add bindings for the VCC regulators of the ADMV1013 microware
upconverter.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
---
changes in v3:
- add missing spaces in the commit subject.
.../bindings/iio/frequency/adi,admv1013.yaml | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
index fc813bcb6532..f2eb2287ed9e 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -39,6 +39,46 @@ properties:
description:
Analog voltage regulator.
+ vcc-drv-supply:
+ description:
+ RF Driver voltage regulator.
+
+ vcc2-drv-supply:
+ description:
+ RF predriver voltage regulator.
+
+ vcc-vva-supply:
+ description:
+ VVA Control Circuit voltage regulator.
+
+ vcc-amp1-supply:
+ description:
+ RF Amplifier 1 voltage regulator.
+
+ vcc-amp2-supply:
+ description:
+ RF Amplifier 2 voltage regulator.
+
+ vcc-env-supply:
+ description:
+ Envelope Detector voltage regulator.
+
+ vcc-bg-supply:
+ description:
+ Mixer Chip Band Gap Circuit voltage regulator.
+
+ vcc-bg2-supply:
+ description:
+ VGA Chip Band Gap Circuit voltage regulator.
+
+ vcc-mixer-supply:
+ description:
+ Mixer voltage regulator.
+
+ vcc-quad-supply:
+ description:
+ Quadruppler voltage regulator.
+
adi,detector-enable:
description:
Enable the Envelope Detector available at output pins VENV_P and
@@ -69,6 +109,16 @@ required:
- clocks
- clock-names
- vcm-supply
+ - vcc-drv-supply
+ - vcc2-drv-supply
+ - vcc-vva-supply
+ - vcc-amp1-supply
+ - vcc-amp2-supply
+ - vcc-env-supply
+ - vcc-bg-supply
+ - vcc-bg2-supply
+ - vcc-mixer-supply
+ - vcc-quad-supply
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -87,6 +137,16 @@ examples:
clocks = <&admv1013_lo>;
clock-names = "lo_in";
vcm-supply = <&vcm>;
+ vcc-drv-supply = <&vcc_drv>;
+ vcc2-drv-supply = <&vcc2_drv>;
+ vcc-vva-supply = <&vcc_vva>;
+ vcc-amp1-supply = <&vcc_amp1>;
+ vcc-amp2-supply = <&vcc_amp2>;
+ vcc-env-supply = <&vcc_env>;
+ vcc-bg-supply = <&vcc_bg>;
+ vcc-bg2-supply = <&vcc_bg2>;
+ vcc-mixer-supply = <&vcc_mixer>;
+ vcc-quad-supply = <&vcc_quad>;
adi,quad-se-mode = "diff";
adi,detector-enable;
};
--
2.41.0
