This v2 is an addon to initial RFC: https://lore.kernel.org/lkml/20230623140944.2613002-1-olivier.moysan@xxxxxxxxxxx/ Despite the "IIO backend" naming has to be changed (as pointed out by Jonathan previously), it has been kept here, for time being. The appropriated naming still has to be discussed later on. In the previous RFC the "IIO backend" concept was proposed through a set of template APIs. This v2 implements a functionnal exemple based on STM32 DFSDM, to bring scaling support to this peripheral. Olivier Moysan (11): iio: introduce iio backend device of: property: add device link support for io-backends dt-bindings: iio: stm32-dfsdm-adc: add scaling support dt-bindings: iio: adc: add scaling support to sd modulator iio: adc: stm32-dfsdm: manage dfsdm as a channel provider iio: adc: stm32-dfsdm: adopt generic channel bindings iio: adc: stm32-dfsdm: add scaling support to dfsdm iio: adc: sd modulator: add scale and offset support ARM: dts: stm32: adopt new dfsdm bindings on stm32mp151 ARM: dts: stm32: add dfsdm pins muxing on stm32mp15 ARM: dts: stm32: add dfsdm iio support on stm32mp157c-ev .../iio/adc/sigma-delta-modulator.yaml | 9 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 189 ++++++------------ arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi | 39 ++++ arch/arm/boot/dts/st/stm32mp151.dtsi | 18 +- arch/arm/boot/dts/st/stm32mp157c-ev1.dts | 68 +++++++ drivers/iio/Makefile | 1 + drivers/iio/adc/sd_adc_modulator.c | 106 ++++++++-- drivers/iio/adc/stm32-dfsdm-adc.c | 187 +++++++++++------ drivers/iio/industrialio-backend.c | 107 ++++++++++ drivers/of/property.c | 2 + include/linux/iio/backend.h | 56 ++++++ 11 files changed, 561 insertions(+), 221 deletions(-) create mode 100644 drivers/iio/industrialio-backend.c create mode 100644 include/linux/iio/backend.h -- 2.25.1
