[PATCH v2 2/2] drivers:iio:admv1013: add vcc regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add regulators for the VCC supplies of the admv1013.

The patch aims to align the implementation with the current admv1014
driver where all the VCC supplies are handled as regulators.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
---
no changes in v2.
 drivers/iio/frequency/admv1013.c | 35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c
index 9bf8337806fc..086e2f35b52c 100644
--- a/drivers/iio/frequency/admv1013.c
+++ b/drivers/iio/frequency/admv1013.c
@@ -73,6 +73,7 @@
 #define ADMV1013_REG_ADDR_READ_MSK		GENMASK(6, 1)
 #define ADMV1013_REG_ADDR_WRITE_MSK		GENMASK(22, 17)
 #define ADMV1013_REG_DATA_MSK			GENMASK(16, 1)
+#define ADMV1013_VCC_NUM_REGULATORS		10
 
 enum {
 	ADMV1013_IQ_MODE,
@@ -96,6 +97,7 @@ struct admv1013_state {
 	/* Protect against concurrent accesses to the device and to data */
 	struct mutex		lock;
 	struct regulator	*reg;
+	struct regulator_bulk_data vcc_regs[ADMV1013_VCC_NUM_REGULATORS];
 	struct notifier_block	nb;
 	unsigned int		input_mode;
 	unsigned int		quad_se_mode;
@@ -379,6 +381,11 @@ static const struct iio_info admv1013_info = {
 	.debugfs_reg_access = &admv1013_reg_access,
 };
 
+static const char * const admv1013_reg_name[] = {
+	 "vcc-drv", "vcc2-drv", "vcc-vva", "vcc-amp1", "vcc-amp2",
+	 "vcc-env", "vcc-bg", "vcc-bg2", "vcc-mixer", "vcc-quad"
+};
+
 static int admv1013_freq_change(struct notifier_block *nb, unsigned long action, void *data)
 {
 	struct admv1013_state *st = container_of(nb, struct admv1013_state, nb);
@@ -495,6 +502,11 @@ static void admv1013_reg_disable(void *data)
 	regulator_disable(data);
 }
 
+static void admv1013_vcc_reg_disable(void *data)
+{
+	regulator_bulk_disable(ADMV1013_VCC_NUM_REGULATORS, data);
+}
+
 static void admv1013_powerdown(void *data)
 {
 	unsigned int enable_reg, enable_reg_msk;
@@ -520,6 +532,7 @@ static void admv1013_powerdown(void *data)
 static int admv1013_properties_parse(struct admv1013_state *st)
 {
 	int ret;
+	unsigned int i;
 	const char *str;
 	struct spi_device *spi = st->spi;
 
@@ -554,6 +567,17 @@ static int admv1013_properties_parse(struct admv1013_state *st)
 		return dev_err_probe(&spi->dev, PTR_ERR(st->reg),
 				     "failed to get the common-mode voltage\n");
 
+	for (i = 0; i < ADMV1013_VCC_NUM_REGULATORS; ++i)
+		st->vcc_regs[i].supply = admv1013_reg_name[i];
+
+	ret = devm_regulator_bulk_get(&st->spi->dev,
+				      ADMV1013_VCC_NUM_REGULATORS,
+				      st->vcc_regs);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to request VCC regulators");
+		return ret;
+	}
+
 	return 0;
 }
 
@@ -591,6 +615,17 @@ static int admv1013_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
+	ret = regulator_bulk_enable(ADMV1013_VCC_NUM_REGULATORS, st->vcc_regs);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to enable regulators");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&spi->dev, admv1013_vcc_reg_disable,
+				       st->vcc_regs);
+	if (ret)
+		return ret;
+
 	st->clkin = devm_clk_get_enabled(&spi->dev, "lo_in");
 	if (IS_ERR(st->clkin))
 		return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
-- 
2.41.0




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux