Hi Conor Dooley,
Thanks for the feedback.
> -----Original Message-----
> From: Conor Dooley <conor@xxxxxxxxxx>
> Sent: Thursday, July 20, 2023 6:19 PM
> To: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>;
> Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>; Thomas Gleixner
> <tglx@xxxxxxxxxxxxx>; Geert Uytterhoeven <geert+renesas@xxxxxxxxx>;
> Magnus Damm <magnus.damm@xxxxxxxxx>; Lee Jones <lee@xxxxxxxxxx>; linux-
> iio@xxxxxxxxxxxxxxx; linux-renesas-soc@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; Fabrizio Castro
> <fabrizio.castro.jz@xxxxxxxxxxx>; Prabhakar Mahadev Lad
> <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>; stable@xxxxxxxxxx
> Subject: Re: [PATCH 2/6] dt-bindings: timer: renesas,rz-mtu3: Fix
> overflow/underflow interrupt names
>
> On Thu, Jul 20, 2023 at 02:10:12PM +0100, Biju Das wrote:
> > As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow
> > interrupt names starts with 'tci' instead of 'tgi'.
> >
> > Fix this documentation issue by replacing below overflow/underflow
> > interrupt names:
> > - tgiv0->tciv0
> > - tgiv1->tciv1
> > - tgiu1->tciu1
> > - tgiv2->tciv2
> > - tgiu2->tciu2
> > - tgiv3->tciv3
> > - tgiv4->tciv4
> > - tgiv6->tciv6
> > - tgiv7->tciv7
> > - tgiv8->tciv8
> > - tgiu8->tciu8
> >
> > Fixes: 0a9d6b54297e ("dt-bindings: timer: Document RZ/G2L MTU3a
> > bindings")
> > Cc: stable@xxxxxxxxxx
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
>
> I assume this means that nothing is actually using these interrupt
> names?
Yes, That is correct. Corresponding driver doesn't have interrupt support.
Cheers,
Biju
