Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 8 Jul 2023 12:58:30 +0530
Jishnu Prakash <quic_jprakash@xxxxxxxxxxx> wrote:

> For the PMIC5-Gen3 type PMICs, ADC peripheral is present in HW for the
> following PMICs: PMK8550, PM8550, PM8550B and PM8550VX PMICs.
> It is similar to PMIC5-Gen2, with SW communication to ADCs on all PMICs
> going through PBS firmware through a single register interface. This
> interface is implemented on an SDAM peripheral on the master PMIC PMK8550
> rather than a dedicated ADC peripheral.
> 
> Signed-off-by: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
> ---
>  .../bindings/iio/adc/qcom,spmi-vadc.yaml      | 117 ++++++++++++++++--
>  .../iio/qcom,spmi-adc5-gen3-pm8550.h          |  48 +++++++
>  .../iio/qcom,spmi-adc5-gen3-pm8550b.h         |  97 +++++++++++++++
>  .../iio/qcom,spmi-adc5-gen3-pm8550vx.h        |  20 +++
>  .../iio/qcom,spmi-adc5-gen3-pmk8550.h         |  54 ++++++++
>  include/dt-bindings/iio/qcom,spmi-vadc.h      |  78 ++++++++++++
>  6 files changed, 402 insertions(+), 12 deletions(-)
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550b.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550vx.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen3-pmk8550.h
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> index eb7d16e385ad..090113e62d52 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> @@ -13,8 +13,8 @@ maintainers:
>  description: |
>    SPMI PMIC voltage ADC (VADC) provides interface to clients to read
>    voltage. The VADC is a 15-bit sigma-delta ADC.
> -  SPMI PMIC5/PMIC5 Gen2 voltage ADC (ADC) provides interface to clients to read
> -  voltage. The VADC is a 16-bit sigma-delta ADC.
> +  SPMI PMIC5/PMIC5 Gen2/PMIC5 Gen3 voltage ADC (ADC) provides interface to
> +  clients to read voltage. The VADC is a 16-bit sigma-delta ADC.
>  
>  properties:
>    compatible:
> @@ -27,10 +27,11 @@ properties:
>            - qcom,spmi-adc5
>            - qcom,spmi-adc-rev2
>            - qcom,spmi-adc5-gen2
> +          - qcom,spmi-adc5-gen3
>  
>    reg:
>      description: VADC base address in the SPMI PMIC register map
> -    maxItems: 1
> +    minItems: 1

?

>  
>    '#address-cells':
>      const: 1
> @@ -38,6 +39,12 @@ properties:
>    '#size-cells':
>      const: 0
>  
> +  "#thermal-sensor-cells":
> +    const: 1
> +    description:
> +      Number of cells required to uniquely identify the thermal sensors. Since
> +      we have multiple sensors this is set to 1.
> +

Defined only for the new gen3?  If so make make it false for the other devices.

>    '#io-channel-cells':
>      const: 1
>  
> @@ -71,8 +78,8 @@ patternProperties:
>          description: |
>            ADC channel number.
>            See include/dt-bindings/iio/qcom,spmi-vadc.h
> -          For PMIC5 Gen2 ADC, the channel numbers are specified separately per PMIC
> -          in the PMIC-specific files in include/dt-bindings/iio/.
> +          For PMIC5 Gen2 and PMIC5 Gen3 ADC, the channel numbers are specified separately per
> +          PMIC in the PMIC-specific files in include/dt-bindings/iio/.
>  
>        label:
>          $ref: /schemas/types.yaml#/definitions/string
> @@ -114,11 +121,12 @@ patternProperties:
>                channel calibration. If property is not found, channel will be
>                calibrated with 0.625V and 1.25V reference channels, also
>                known as absolute calibration.
> -            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc5-gen2" and
> -              "qcom,spmi-adc-rev2", if this property is specified VADC will use
> -              the VDD reference (1.875V) and GND for channel calibration. If
> -              property is not found, channel will be calibrated with 0V and 1.25V
> -              reference channels, also known as absolute calibration.
> +            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc5-gen2",
> +              "qcom,spmi-adc-rev2" and "qcom,spmi-adc5-gen3", if this property
> +              is specified VADC will use the VDD reference (1.875V) and GND for
> +              channel calibration. If property is not found, channel will be
> +              calibrated with 0V and 1.25V reference channels, also known as
> +              absolute calibration.
>          type: boolean
>  
>        qcom,hw-settle-time:
> @@ -136,6 +144,12 @@ patternProperties:
>              from the ADC that is an average of multiple samples. The value
>              selected is 2^(value).
>  
> +      qcom,adc-tm-type:
> +        description: |
> +            Indicates if ADC_TM monitoring is done on this channel.
> +            Defined for compatible property "qcom,spmi-adc5-gen3".
> +        type: boolean

Enforce that in the binding, not via a comment. Once the binding
performs that check (set it to false for non matching compatibles) then
there is no need to also mention it in text.

> +
>      required:
>        - reg
>  
> @@ -213,7 +227,9 @@ allOf:
>        properties:
>          compatible:
>            contains:
> -            const: qcom,spmi-adc5-gen2
> +            enum:
> +              - qcom,spmi-adc5-gen2
> +              - qcom,spmi-adc5-gen3

Side note - it's fine to have a single element enum, so you could
use that option to reduce churn in this set...

>  
>      then:
>        patternProperties:
> @@ -299,7 +315,7 @@ examples:
>                  label = "xo_therm";
>              };
>  
> -            channel@47 {
> +            channel@147 {

?  If that's a valid change, then it looks like a separate fix.

>                  reg = <PM8350_ADC5_GEN2_AMUX_THM4_100K_PU(1)>;
>                  qcom,ratiometric;
>                  qcom,hw-settle-time = <200>;
> @@ -307,3 +323,80 @@ examples:
>              };
>          };
>      };
> +
> +  - |
> +    #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pmk8550.h>
> +    #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h>
> +    #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550b.h>
> +    #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550vx.h>
> +
> +    pmic {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      /* VADC node */
> +      pmk8550_vadc: vadc@9000 {
> +        compatible = "qcom,spmi-adc5-gen3";
> +        reg = <0x9000>;
> +        interrupts = <0x0 0x90 0x1 IRQ_TYPE_EDGE_RISING>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        #io-channel-cells = <1>;
> +        #thermal-sensor-cells = <1>;
> +
> +        /* PMK8550 Channel nodes */
> +        channel@3 {
> +          reg = <PMK8550_ADC5_GEN3_DIE_TEMP>;
> +          label = "pmk8550_die_temp";
> +          qcom,pre-scaling = <1 1>;
> +        };
> +
> +        channel@44 {
> +          reg = <PMK8550_ADC5_GEN3_AMUX_THM1_XO_THERM_100K_PU>;
> +          label = "pmk8550_xo_therm";
> +          qcom,pre-scaling = <1 1>;
> +          qcom,ratiometric;
> +          qcom,hw-settle-time = <200>;
> +          qcom,adc-tm-type;
> +        };
> +
> +        /* PM8550 Channel nodes */
> +        channel@103 {
> +          reg = <PM8550_ADC5_GEN3_DIE_TEMP>;
> +          label = "pm8550_die_temp";
> +          qcom,pre-scaling = <1 1>;
> +        };
> +
> +        channel@18e {
> +          reg = <PM8550_ADC5_GEN3_VPH_PWR>;
> +          label = "pm8550_vph_pwr";
> +          qcom,pre-scaling = <1 3>;
> +        };
> +
> +        /* PM8550B Channel nodes */
> +        channel@703 {
> +          reg = <PM8550B_ADC5_GEN3_DIE_TEMP>;
> +          label = "pm8550b_die_temp";
> +          qcom,pre-scaling = <1 1>;
> +        };
> +
> +        channel@78e {
> +          reg = <PM8550B_ADC5_GEN3_VPH_PWR>;
> +          label = "pm8550b_vph_pwr";
> +          qcom,pre-scaling = <1 3>;
> +        };
> +
> +        channel@78f {
> +          reg = <PM8550B_ADC5_GEN3_VBAT_SNS_QBG>;
> +          label = "pm8550b_vbat_sns_qbg";
> +          qcom,pre-scaling = <1 3>;
> +        };
> +
> +        /* PM8550VS_C Channel nodes */
> +        channel@203 {
> +          reg = <PM8550VS_ADC5_GEN3_DIE_TEMP(2)>;
> +          label = "pm8550vs_c_die_temp";
> +          qcom,pre-scaling = <1 1>;
> +        };
> +      };
> +    };
> diff --git a/include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h b/include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h
> new file mode 100644
> index 000000000000..74e6e2f6f9ed
> --- /dev/null
> +++ b/include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h
> @@ -0,0 +1,48 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8550_H
> +#define _DT_BINDINGS_QCOM_SPMI_VADC_PM8550_H
> +
> +#ifndef PM8550_SID
> +#define PM8550_SID		1
> +#endif
> +
> +/* ADC channels for PM8550_ADC for PMIC5 Gen3 */
> +#define PM8550_ADC5_GEN3_OFFSET_REF			(PM8550_SID << 8 | 0x00)

can we do the naming for the 0x00 as per Dmitry's set? That is get them from
qcom,spmi-vadc.h

https://patchwork.kernel.org/project/linux-iio/patch/20230707123027.1510723-2-dmitry.baryshkov@xxxxxxxxxx/

> +#define PM8550_ADC5_GEN3_1P25VREF			(PM8550_SID << 8 | 0x01)
> +#define PM8550_ADC5_GEN3_VREF_VADC			(PM8550_SID << 8 | 0x02)
> +#define PM8550_ADC5_GEN3_DIE_TEMP			(PM8550_SID << 8 | 0x03)
> +


> diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h
> index b1413c62ad27..ca5a0a947b3b 100644
> --- a/include/dt-bindings/iio/qcom,spmi-vadc.h
> +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h
> @@ -298,4 +298,82 @@
>  #define ADC5_GEN2_SBUx				0x94
>  #define ADC5_GEN2_VBAT_2S_MID			0x96
>  
> +/* ADC channels for PMIC5 Gen3 */
> +
> +#define ADC5_GEN3_OFFSET_REF			0x00
> +#define ADC5_GEN3_1P25VREF			0x01
> +#define ADC5_GEN3_VREF_VADC			0x02
> +#define ADC5_GEN3_DIE_TEMP			0x03





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux