Re: [PATCH 05/10] firewall: introduce stm32_firewall framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 05, 2023 at 07:27:54PM +0200, Gatien Chevallier wrote:
> Introduce a firewall framework that offers to firewall consumers different
> firewall services such as the ability to check their access rights against
> their firewall controller(s).
> 
> The firewall framework offers a generic API that is defined in firewall
> controllers drivers to best fit the specificity of each firewall.

But you aren't defining a "generic" api here, you are defining a
specific one for your specific hardware.

Or am I missing something?

> 
> There are various types of firewalls:
> -Peripheral firewalls that filter accesses to peripherals
> -Memory firewalls that filter accesses to memories or memory regions
> -Resource firewalls that filter accesses to internal resources such as
> reset and clock controllers
> 
> A firewall controller must be probed at arch_initcall level and register
> to the framework so that consumers can use their services.

Why must it happen at arch_initcall?  So it can never be a module?  That
feels wrong.

> 
> Signed-off-by: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
> ---
>  MAINTAINERS                               |   5 +
>  arch/arm64/Kconfig.platforms              |   1 +
>  drivers/bus/Kconfig                       |  10 +
>  drivers/bus/Makefile                      |   1 +
>  drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>  drivers/bus/stm32_firewall.h              |  83 +++++++
>  include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
>  7 files changed, 486 insertions(+)
>  create mode 100644 drivers/bus/stm32_firewall.c
>  create mode 100644 drivers/bus/stm32_firewall.h
>  create mode 100644 include/linux/bus/stm32_firewall_device.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 41385f01fa98..fabf95ba9b86 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20123,6 +20123,11 @@ T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>  F:	drivers/media/i2c/st-mipid02.c
>  
> +ST STM32 FIREWALL
> +M:	Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
> +S:	Maintained
> +F:	drivers/bus/stm32_firewall.c
> +
>  ST STM32 I2C/SMBUS DRIVER
>  M:	Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxxxxxxx>
>  M:	Alain Volmat <alain.volmat@xxxxxxxxxxx>
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 6069120199bb..5a46e90f1e4e 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -293,6 +293,7 @@ config ARCH_STM32
>  	select ARM_SMC_MBOX
>  	select ARM_SCMI_PROTOCOL
>  	select COMMON_CLK_SCMI
> +	select STM32_FIREWALL
>  	help
>  	  This enables support for ARMv8 based STMicroelectronics
>  	  STM32 family, including:
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index fcfa280df98a..4d54a7ea52b2 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -163,6 +163,16 @@ config QCOM_SSC_BLOCK_BUS
>  	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>  	  which provides clocks for the above.
>  
> +config STM32_FIREWALL
> +	bool "STM32 Firewall framework"
> +	depends on ARCH_STM32

Why this dependency?

> +	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
> +	help
> +	  Say y to enable firewall framework and its services. Firewall
> +	  controllers will be able to register to the framework. Firewall
> +	  controllers must be initialized and register to the firewall framework
> +	  at arch_initcall level.

This needs better wording saying it is only for stm32 devices.

> +
>  config SUN50I_DE2_BUS
>  	bool "Allwinner A64 DE2 Bus Driver"
>  	  default ARM64
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> index d90eed189a65..fc0511450ec2 100644
> --- a/drivers/bus/Makefile
> +++ b/drivers/bus/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
>  obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
>  obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
>  obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
> +obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
>  obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
>  obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
>  obj-$(CONFIG_OF)		+= simple-pm-bus.o
> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
> new file mode 100644
> index 000000000000..510db5bc6eaf
> --- /dev/null
> +++ b/drivers/bus/stm32_firewall.c
> @@ -0,0 +1,252 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later

Are you _SURE_ this needs to be "or later"?  Sorry, I have to ask.

thanks,

greg k-h



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux