Re: [PATCH v2 7/9] ASoC: codecs: Add support for the generic IIO auxiliary devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tue, May 23, 2023 at 05:12:21PM +0200, Herve Codina kirjoitti:
> Industrial I/O devices can be present in the audio path.
> These devices needs to be used as audio components in order to be fully
> integrated in the audio path.
> 
> This support allows to consider these Industrial I/O devices as auxliary
> audio devices and allows to control them using mixer controls.

...

> +// audio-iio-aux.c  --  ALSA SoC glue to use IIO devices as audio components

Putting file name into file is not a good idea in case the file will be renamed
in the future.

...

> +struct audio_iio_aux_chan {
> +	struct iio_channel *iio_chan;
> +	const char *name;
> +	bool is_invert_range;

If you put bool after int:s it may save a few bytes in some cases.

> +	int max;
> +	int min;

Wondering if there is already a data type for the ranges (like linear_range.h,
but not sure it's applicable here).

> +};

...

> +	if (val < 0)
> +		return -EINVAL;
> +	if (val > max - min)

Btw, who will validate that max > min?

> +		return -EINVAL;

...

> +	return 1; /* The value changed */

Perhaps this 1 needs a definition?

...

> +static struct snd_soc_dapm_widget widgets[3] = {0};
> +static struct snd_soc_dapm_route routes[2] = {0};

0:s are not needed. Moreover, the entire assingments are redundant
as this is guaranteed by the C standard.

...

> +	char *input_name = NULL;
> +	char *output_name = NULL;
> +	char *pga_name = NULL;

Redundant assignments if you properly label the freeing.

...

> +	BUILD_BUG_ON(ARRAY_SIZE(widgets) < 3);

Use static_assert() at the place where the array is defined.

...

> +	BUILD_BUG_ON(ARRAY_SIZE(routes) < 2);

Ditto.

...

> +end:

out_free:

> +	/* Allocated names are no more needed (duplicated in ASoC internals) */
> +	kfree(pga_name);
> +	kfree(output_name);
> +	kfree(input_name);
> +
> +	return ret;

...

> +	for (i = 0; i < iio_aux->num_chans; i++) {
> +		chan = iio_aux->chans + i;
> +
> +		ret = iio_read_max_channel_raw(chan->iio_chan, &chan->max);
> +		if (ret) {
> +			dev_err(component->dev, "chan[%d] %s: Cannot get max raw value (%d)\n",
> +				i, chan->name, ret);
> +			return ret;

It sounds like a part of ->probe() flow, correct?
Can dev_err_probe() be used here?

> +		}
> +
> +		ret = iio_read_min_channel_raw(chan->iio_chan, &chan->min);
> +		if (ret) {
> +			dev_err(component->dev, "chan[%d] %s: Cannot get min raw value (%d)\n",
> +				i, chan->name, ret);
> +			return ret;

Ditto.

> +		}
> +
> +		/* Set initial value */
> +		ret = iio_write_channel_raw(chan->iio_chan,
> +					    chan->is_invert_range ? chan->max : chan->min);
> +		if (ret) {
> +			dev_err(component->dev, "chan[%d] %s: Cannot set initial value (%d)\n",
> +				i, chan->name, ret);
> +			return ret;

Ditto.

> +		}

...

> +		dev_dbg(component->dev, "chan[%d]: Added %s (min=%d, max=%d, invert=%s)\n",
> +			i, chan->name, chan->min, chan->max,
> +			chan->is_invert_range ? "on" : "off");

str_on_off()

> +	}

...

> +	count = of_property_count_strings(np, "io-channel-names");
> +	if (count < 0) {

> +		dev_err(iio_aux->dev, "%pOF: failed to read io-channel-names\n", np);
> +		return count;

		return dev_err_probe();

> +	}

...

> +	for (i = 0; i < iio_aux->num_chans; i++) {
> +		iio_aux_chan = iio_aux->chans + i;
> +
> +		ret = of_property_read_string_index(np, "io-channel-names", i,
> +						    &iio_aux_chan->name);
> +		if (ret < 0) {
> +			dev_err(iio_aux->dev, "%pOF: failed to read io-channel-names[%d]\n", np, i);
> +			return ret;

Ditto.

> +		}

> +		tmp = 0;
> +		of_property_read_u32_index(np, "snd-control-invert-range", i, &tmp);

> +		iio_aux_chan->is_invert_range = tmp;

You can use this variable directly.

> +	}

Btw, can you avoid using OF APIs? It's better to have device property/fwnode
API to be used from day 1.

...

> +	platform_set_drvdata(pdev, iio_aux);

Which callback is using this driver data?

...

> +static const struct of_device_id audio_iio_aux_ids[] = {
> +	{ .compatible = "audio-iio-aux", },

Inner comma is not needed.

> +	{ }
> +};

...

> +static struct platform_driver audio_iio_aux_driver = {
> +	.driver = {
> +		.name = "audio-iio-aux",
> +		.of_match_table = audio_iio_aux_ids,
> +	},
> +	.probe = audio_iio_aux_probe,
> +};

> +

Redundant blank line

> +module_platform_driver(audio_iio_aux_driver);

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux