The raw values notes mention 'ADC counts' and are not fully accurate. Reword the notes in order to remove the 'ADC counts' and describe the conversion needed between a raw value and a value in the standard units. Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx> --- include/linux/iio/consumer.h | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 6802596b017c..f536820b9cf2 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -201,8 +201,9 @@ struct iio_dev * @chan: The channel being queried. * @val: Value read back. * - * Note raw reads from iio channels are in adc counts and hence - * scale will need to be applied if standard units required. + * Note, if standard units are required, raw reads from iio channels + * need the offset (default 0) and scale (default 1) to be applied + * as (raw + offset) * scale. */ int iio_read_channel_raw(struct iio_channel *chan, int *val); @@ -212,8 +213,9 @@ int iio_read_channel_raw(struct iio_channel *chan, * @chan: The channel being queried. * @val: Value read back. * - * Note raw reads from iio channels are in adc counts and hence - * scale will need to be applied if standard units required. + * Note, if standard units are required, raw reads from iio channels + * need the offset (default 0) and scale (default 1) to be applied + * as (raw + offset) * scale. * * In opposit to the normal iio_read_channel_raw this function * returns the average of multiple reads. @@ -281,8 +283,9 @@ int iio_read_channel_attribute(struct iio_channel *chan, int *val, * @chan: The channel being queried. * @val: Value being written. * - * Note raw writes to iio channels are in dac counts and hence - * scale will need to be applied if standard units required. + * Note that for raw writes to iio channels, if the value provided is + * in standard units, the affect of the scale and offset must be removed + * as (value / scale) - offset. */ int iio_write_channel_raw(struct iio_channel *chan, int val); @@ -292,8 +295,9 @@ int iio_write_channel_raw(struct iio_channel *chan, int val); * @chan: The channel being queried. * @val: Value read back. * - * Note raw reads from iio channels are in adc counts and hence - * scale will need to be applied if standard units are required. + * Note, if standard units are required, raw reads from iio channels + * need the offset (default 0) and scale (default 1) to be applied + * as (raw + offset) * scale. */ int iio_read_max_channel_raw(struct iio_channel *chan, int *val); @@ -308,8 +312,9 @@ int iio_read_max_channel_raw(struct iio_channel *chan, int *val); * For ranges, three vals are always returned; min, step and max. * For lists, all the possible values are enumerated. * - * Note raw available values from iio channels are in adc counts and - * hence scale will need to be applied if standard units are required. + * Note, if standard units are required, raw available values from iio + * channels need the offset (default 0) and scale (default 1) to be applied + * as (raw + offset) * scale. */ int iio_read_avail_channel_raw(struct iio_channel *chan, const int **vals, int *length); -- 2.40.1
