Add a more complete support for vncl4040 and vcnl4200, which allows to change the distance of proximity detection and interrupt support for the illumination sensor. Proximity: - Interrupt support (new on vcnl4200). - Adaptable integration time (new on vcnl4200) - the sampling rate changes according to this value. - Debounce times - interrupt is asserted if the value is above or below a certain threshold. - Oversampling ratio - Amount of LED pulses per measurement. - Calibration bias - LED current calibration of the sensor. Illumination: - Interrupt support. - Adaptable integration time - the sampling rate and scale changes according to this value. - Debounce times – interrupt is asserted if the value is above or below a certain threshold. changes v2: - [PATCH v2 3/7] Fixed calculation of al_scale. Fix the value of vcnl4040 according to the data-sheet. Use div_u64 for the division. Astrid Rost (7): [PATCH v2 1/7] iio: light: vcnl4000: Add proximity irq for vcnl4200 [PATCH v2 2/7] iio: light: vcnl4000: Add proximity ps_it for vcnl4200 [PATCH v2 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200 [PATCH v2 4/7] iio: light: vcnl4000: add illumination irq vcnl4040/4200 [PATCH v2 5/7] iio: light: vcnl4000: Add debounce count for vcnl4040/4200 [PATCH v2 6/7] iio: light: vcnl4000: Add oversampling_ratio for 4040/4200 [PATCH v2 7/7] iio: light: vcnl4000: Add calibration bias for 4040/4200 drivers/iio/light/vcnl4000.c | 723 +++++++++++++++++++++++++++++++---- 1 file changed, 654 insertions(+), 69 deletions(-) -- 2.30.2