Re: [PATCH v7 2/3] dt-bindings: iio: adc: add adi,max11410.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/10/2022 11:24, Ibrahim Tilki wrote:
> Adding devicetree binding documentation for max11410 adc.
> 
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>

(...)

> +  vref2n-supply:
> +    description: vref2n supply can be used as reference for conversion.
> +
> +  spi-max-frequency:
> +    maximum: 8000000
> +
> +patternProperties:
> +  "^channel(@[0-9])?$":
> +    $ref: "adc.yaml"

No need for quotes.

> +    type: object
> +    description: Represents the external channels which are connected to the ADC.
> +
> +    properties:
> +      reg:
> +        description: The channel number in single-ended mode.
> +        minimum: 0
> +        maximum: 9
> +
> +      adi,reference:
> +        description: |
> +          Select the reference source to use when converting on
> +          the specific channel. Valid values are:
> +          0: VREF0P/VREF0N
> +          1: VREF1P/VREF1N
> +          2: VREF2P/VREF2N
> +          3: AVDD/AGND
> +          4: VREF0P/AGND
> +          5: VREF1P/AGND
> +          6: VREF2P/AGND
> +          If this field is left empty, AVDD/AGND is selected.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        enum: [0, 1, 2, 3, 4, 5, 6]
> +        default: 3
> +
> +      adi,input-mode:
> +        description: |
> +          Select signal path of input channels. Valid values are:
> +          0: Buffered, low-power, unity-gain path (default)
> +          1: Bypass path
> +          2: PGA path
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        enum: [0, 1, 2]
> +        default: 0
> +
> +      diff-channels: true
> +
> +      bipolar: true
> +
> +      settling-time-us: true
> +
> +      adi,buffered-vrefp:
> +        description: Enable buffered mode for positive reference.
> +        type: boolean
> +
> +      adi,buffered-vrefn:
> +        description: Enable buffered mode for negative reference.
> +        type: boolean
> +
> +    required:
> +      - reg
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        adc@0 {
> +            reg = <0>;
> +            compatible = "adi,max11410";
> +            spi-max-frequency = <8000000>;
> +
> +            interrupt-parent = <&gpio>;
> +            interrupts = <25 2>;

What does the 2 stand for? I already asked to fix this.

Best regards,
Krzysztof




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux