Re: [PATCH v6 2/3] dt-bindings: iio: adc: add adi,max11410.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 29 Sep 2022 11:35:10 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> wrote:

> On 27/09/2022 16:18, Ibrahim Tilki wrote:
> > Adding devicetree binding documentation for max11410 adc.
> > 
> > Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
> > ---
> >  .../bindings/iio/adc/adi,max11410.yaml        | 176 ++++++++++++++++
> >  .../devicetree/bindings/rtc/adi,max313xx.yaml | 195 ++++++++++++++++++
> >  2 files changed, 371 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
> >  create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
> >   
> 
> So it is a v6 and it is the first version you send to proper maintainers
> using get_maintainers.pl... sigh...

I only noticed the missing cc on v5 - wasn't paying attention to the binding
as lots of stuff in the driver...

However, how did this pick up an rtc binding for a totally different part?


> 
> > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
> > new file mode 100644
> > index 0000000000..46a37303da
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
> > @@ -0,0 +1,176 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright 2022 Analog Devices Inc.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices MAX11410 ADC device driver
> > +
> > +maintainers:
> > +  - Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
> > +
> > +description: |
> > +  Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be
> > +  found here:
> > +    https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - adi,max11410
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +
> > +  interrupt-names:
> > +    description: Name of the gpio pin of max11410 used for IRQ
> > +    items:
> > +      - enum:
> > +          - gpio0
> > +          - gpio1  
> 
> This is wrong. You said in interrupts you can have two items, but here
> you list only one. I don't know what do you want to achieve here.

Aim is 0, 1 or 2 interrupts + knowing which ones they are.
Device has two pins that have very similar functionality and board
designers are likely to pick one or the two more or less at random depending
on which trace is easier to route.

So my guess is this needs minItems, maxItems.


> 
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 0
> > +
> > +  avdd-supply:
> > +    description: Optional avdd supply. Used as reference when no explicit reference supplied.
> > +
> > +  vref0p-supply:
> > +    description: vref0p supply can be used as reference for conversion.
> > +
> > +  vref1p-supply:
> > +    description: vref1p supply can be used as reference for conversion.
> > +
> > +  vref2p-supply:
> > +    description: vref2p supply can be used as reference for conversion.
> > +
> > +  vref0n-supply:
> > +    description: vref0n supply can be used as reference for conversion.
> > +
> > +  vref1n-supply:
> > +    description: vref1n supply can be used as reference for conversion.
> > +
> > +  vref2n-supply:
> > +    description: vref2n supply can be used as reference for conversion.
> > +
> > +  spi-max-frequency:
> > +    maximum: 8000000
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +patternProperties:  
> 
> This goes before required block
> 
> > +  "^channel(@[0-9])?$":
> > +    $ref: "adc.yaml"
> > +    type: object
> > +    description: Represents the external channels which are connected to the ADC.
> > +
> > +    properties:
> > +      reg:
> > +        description: The channel number in single-ended mode.
> > +        minimum: 0
> > +        maximum: 9
> > +
> > +      adi,reference:
> > +        description: |
> > +          Select the reference source to use when converting on
> > +          the specific channel. Valid values are:
> > +          0: VREF0P/VREF0N
> > +          1: VREF1P/VREF1N
> > +          2: VREF2P/VREF2N
> > +          3: AVDD/AGND
> > +          4: VREF0P/AGND
> > +          5: VREF1P/AGND
> > +          6: VREF2P/AGND
> > +          If this field is left empty, AVDD/AGND is selected.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        enum: [0, 1, 2, 3, 4, 5, 6]
> > +        default: 3
> > +
> > +      adi,input-mode:
> > +        description: |
> > +          Select signal path of input channels. Valid values are:
> > +          0: Buffered, low-power, unity-gain path (default)
> > +          1: Bypass path
> > +          2: PGA path
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        enum: [0, 1, 2]
> > +        default: 0
> > +
> > +      diff-channels: true
> > +
> > +      bipolar: true
> > +
> > +      settling-time-us: true
> > +
> > +      adi,buffered-vrefp:
> > +        description: Enable buffered mode for positive reference.
> > +        type: boolean
> > +
> > +      adi,buffered-vrefn:
> > +        description: Enable buffered mode for negative reference.
> > +        type: boolean
> > +
> > +    required:
> > +      - reg
> > +
> > +    additionalProperties: false
> > +
> > +allOf:
> > +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    spi {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        adc@0 {
> > +            reg = <0>;
> > +            compatible = "adi,max11410";
> > +            spi-max-frequency = <8000000>;
> > +
> > +            interrupt-parent = <&gpio>;
> > +            interrupts = <25 2>;
> > +            interrupt-names = "gpio1";
> > +
> > +            avdd-supply = <&adc_avdd>;
> > +
> > +            vref1p-supply = <&adc_vref1p>;
> > +            vref1n-supply = <&adc_vref1n>;
> > +
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            channel@0 {
> > +                reg = <0>;
> > +            };
> > +
> > +            channel@1 {
> > +                reg = <1>;
> > +                diff-channels = <2 3>;
> > +                adi,reference = <1>;
> > +                bipolar;
> > +                settling-time-us = <100000>;
> > +            };
> > +
> > +            channel@2 {
> > +                reg = <2>;
> > +                diff-channels = <7 9>;
> > +                adi,reference = <5>;
> > +                adi,input-mode = <2>;
> > +                settling-time-us = <50000>;
> > +            };
> > +        };
> > +    };



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux