[PATCH 2/2] counter: Realign counter_comp comment block to 80 characters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The member documentation comment lines for struct counter_comp extend
past the 80-characters column boundary due to extra identation at the
start of each section. This patch realigns the comment block within the
80-characters boundary by removing these superfluous indents.

Reviewed-by: Yanteng Si <siyanteng@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220902120839.4260-1-william.gray@xxxxxxxxxx/
Signed-off-by: William Breathitt Gray <william.gray@xxxxxxxxxx>
---
 include/linux/counter.h | 40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/include/linux/counter.h b/include/linux/counter.h
index 1fe17f5adb09..a81234bc8ea8 100644
--- a/include/linux/counter.h
+++ b/include/linux/counter.h
@@ -38,64 +38,64 @@ enum counter_comp_type {
  * @type:		Counter component data type
  * @name:		device-specific component name
  * @priv:		component-relevant data
- * @action_read:		Synapse action mode read callback. The read value of the
+ * @action_read:	Synapse action mode read callback. The read value of the
  *			respective Synapse action mode should be passed back via
  *			the action parameter.
- * @device_u8_read:		Device u8 component read callback. The read value of the
+ * @device_u8_read:	Device u8 component read callback. The read value of the
  *			respective Device u8 component should be passed back via
  *			the val parameter.
- * @count_u8_read:		Count u8 component read callback. The read value of the
+ * @count_u8_read:	Count u8 component read callback. The read value of the
  *			respective Count u8 component should be passed back via
  *			the val parameter.
- * @signal_u8_read:		Signal u8 component read callback. The read value of the
+ * @signal_u8_read:	Signal u8 component read callback. The read value of the
  *			respective Signal u8 component should be passed back via
  *			the val parameter.
- * @device_u32_read:		Device u32 component read callback. The read value of
+ * @device_u32_read:	Device u32 component read callback. The read value of
  *			the respective Device u32 component should be passed
  *			back via the val parameter.
- * @count_u32_read:		Count u32 component read callback. The read value of the
+ * @count_u32_read:	Count u32 component read callback. The read value of the
  *			respective Count u32 component should be passed back via
  *			the val parameter.
- * @signal_u32_read:		Signal u32 component read callback. The read value of
+ * @signal_u32_read:	Signal u32 component read callback. The read value of
  *			the respective Signal u32 component should be passed
  *			back via the val parameter.
- * @device_u64_read:		Device u64 component read callback. The read value of
+ * @device_u64_read:	Device u64 component read callback. The read value of
  *			the respective Device u64 component should be passed
  *			back via the val parameter.
- * @count_u64_read:		Count u64 component read callback. The read value of the
+ * @count_u64_read:	Count u64 component read callback. The read value of the
  *			respective Count u64 component should be passed back via
  *			the val parameter.
- * @signal_u64_read:		Signal u64 component read callback. The read value of
+ * @signal_u64_read:	Signal u64 component read callback. The read value of
  *			the respective Signal u64 component should be passed
  *			back via the val parameter.
- * @action_write:		Synapse action mode write callback. The write value of
+ * @action_write:	Synapse action mode write callback. The write value of
  *			the respective Synapse action mode is passed via the
  *			action parameter.
- * @device_u8_write:		Device u8 component write callback. The write value of
+ * @device_u8_write:	Device u8 component write callback. The write value of
  *			the respective Device u8 component is passed via the val
  *			parameter.
- * @count_u8_write:		Count u8 component write callback. The write value of
+ * @count_u8_write:	Count u8 component write callback. The write value of
  *			the respective Count u8 component is passed via the val
  *			parameter.
- * @signal_u8_write:		Signal u8 component write callback. The write value of
+ * @signal_u8_write:	Signal u8 component write callback. The write value of
  *			the respective Signal u8 component is passed via the val
  *			parameter.
- * @device_u32_write:		Device u32 component write callback. The write value of
+ * @device_u32_write:	Device u32 component write callback. The write value of
  *			the respective Device u32 component is passed via the
  *			val parameter.
- * @count_u32_write:		Count u32 component write callback. The write value of
+ * @count_u32_write:	Count u32 component write callback. The write value of
  *			the respective Count u32 component is passed via the val
  *			parameter.
- * @signal_u32_write:		Signal u32 component write callback. The write value of
+ * @signal_u32_write:	Signal u32 component write callback. The write value of
  *			the respective Signal u32 component is passed via the
  *			val parameter.
- * @device_u64_write:		Device u64 component write callback. The write value of
+ * @device_u64_write:	Device u64 component write callback. The write value of
  *			the respective Device u64 component is passed via the
  *			val parameter.
- * @count_u64_write:		Count u64 component write callback. The write value of
+ * @count_u64_write:	Count u64 component write callback. The write value of
  *			the respective Count u64 component is passed via the val
  *			parameter.
- * @signal_u64_write:		Signal u64 component write callback. The write value of
+ * @signal_u64_write:	Signal u64 component write callback. The write value of
  *			the respective Signal u64 component is passed via the
  *			val parameter.
  */
-- 
2.37.3




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux