The following changes since commit 568035b01cfb107af8d2e4bd2fb9aea22cf5b868: Linux 6.0-rc1 (2022-08-14 15:50:18 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.1a for you to fetch changes up to 2f61ff8272967c9bdcba810aa978170814b08f7c: iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(). (2022-09-05 18:08:42 +0100) ---------------------------------------------------------------- 1st set of IIO new device support, features and cleanup for 6.1 This includes Nuno Sa's work to move the IIO core over to generic firmware properties rather than having DT specific code paths. Combined with Andy Shevchenko's long term work on drivers, this leaves IIO in a good state for handling other firmware types. New device support - liteon,ltrf216a * New driver and dt bindings to support this Light sensor. - maxim,max11205 * New driver for this 16bit single channel ADC. - memsensing,msa311 * New driver for this accelerometer. Includes a string helper for read/write. - richtek,rtq6056 * New driver and dt binding to support this current monitor used to measure power usage. - yamaha,yas530 * Support the YAS537 variant (series includes several fixes for other parts and new driver features). Staging graduation - adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using the posted RFC of that framework. Features - core * Large rework to make all the core IIO code use generic firmware properties. Includes switching some drivers over as well using newly provided generic interfaces and allowing removal of DT specific ones. * Support for gesture event types for single and double tap. Used in bosch,bma400. - atmel,at91-sama5d2 * Add support for temperature sensor which uses two muxed inputs to estimate the temperature. * Handle trackx bits of EMR register to improve temp sampling accuracy. * Runtime PM support. - liteon,ltrf216a * Add a _raw channel output to allow working around an issue with differing conversions equations that breaks some user space controls. - mexelis,mlx90632 * Support regulator control. - ti,tsc2046 * External reference voltage support. Clean up and minor fixes - Tree-wide * devm_clk_get_enabled() replacements of opencoded equivalent. * Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers). * Various minor warning and similar cleanup such as missing static markings. * strlcpy() to strscpy() for cases where return value not checked. * provide units.h entries for more HZ units and use them in drivers. - dt-bindings cleanup * Drop maintainers listss where the email address is bouncing. * Switch spi devices over to using spi-peripheral.yaml * Add some missing unevaluatedProperties / additionalProperties: false entries. - ABI docs * Add some missing channel type specific sampling frequency entries. * Add parameter names for callback parameters. - MAINTAINERS * Fix wrong ADI forum links. - core * lockdep class per device, to avoid an issue with nest when one IIO device is the consumer of another. * White space tweaks. - asc,dlhl60d * Use get_unaligned_be24 to avoid some unusual data manipulation and masking. - atmel,at91-sama5d2 * Fix wrong max value. * Improve error handling when measuring pressure and touch. * Add locks to remove races on updating oversampling / sampling freq. * Add missing calls in suspend and resume path to ensure state is correctly brought up if buffered capture was in use when suspend happened. * Error out of write_raw() callback if buffered capture enabled to avoid unpredictable behavior. * Handle different versions having different oversampling ratio support and drop excess error checking. * Cleanup magic value defines where the name is just the value and hence hurts readability. * Use read_avail() callback to provide info on possible oversampling ratios. * Correctly handle variable bit depth when doing oversampling on different supported parts. Also handle higher oversampling ratios. - fsl,imx8qxp * Don't ignore errors from regulator_get_voltage() so as to avoid some very surprising scaling. - invensense,icp10100 * Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made sense and is now deprecated. In this driver we just avoid double disabling in some paths. - maxim,max1363 * Drop consumer channel map provision by platform data. There have been better ways of doing this for years and there are no in tree users. - microchip,mcp3911 * Update status to maintained. - qcom,spmi-adc5 * Support measurement of LDO output voltage. - qcom,spmi-adc * Add missing channel available on SM6125 SoC. - st,stmpe * Drop requirement on node name in binding now that driver correctly doesn't enforce it. - stx104 * Move to more appropriate addac directory - ti,am335x * Document ti,am654-adc compatible already in use in tree. - ti,hmc5843 * Move dev_pm_ops out of header and use new pm macros to handle export. - yamaha,yas530 * Minor cleanups. ---------------------------------------------------------------- Andy Shevchenko (5): iio: pressure: dlhl60d: Don't take garbage into consideration when reading data lib/string_helpers: Add str_read_write() helper iio: magnetometer: yamaha-yas530: Use pointers as driver data iio: magnetometer: yamaha-yas530: Make strings const in chip info iio: magnetometer: yamaha-yas530: Use dev_err_probe() Antoniu Miclaus (2): iio: frequency: admv1014: return -EINVAL directly MAINTAINERS: fix Analog Devices forum links ChiYuan Huang (3): dt-bindings: iio: adc: Add rtq6056 adc support iio: adc: Add rtq6056 support Documentation: ABI: testing: rtq6056: Update ABI docs Claudiu Beznea (19): iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX iio: adc: at91-sama5d2_adc: check return status for pressure and touch iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions iio: adc: at91-sama5d2_adc: move the check of oversampling in its function iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio iio: adc: at91-sama5d2_adc: move oversampling storage in its function iio: adc: at91-sama5d2_adc: update trackx on emr iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq() iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw() dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel iio: adc: at91-sama5d2_adc: add support for temperature sensor iio: adc: at91-sama5d2_adc: add empty line after functions iio: adc: at91-sama5d2_adc: add runtime pm support Crt Mori (2): iio: temperature: mlx90632 Add supply regulator to sensor dt-bindings: iio: mlx90632 Add supply regulator documentation Dmitry Rokosov (6): units: complement the set of Hz units iio: accel: adxl345: use HZ macro from units.h iio: common: scmi_sensors: use HZ macro from units.h dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd. iio: add MEMSensing MSA311 3-axis accelerometer driver dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver Francesco Dolcini (1): dt-bindings: iio: adc: stmpe: Remove node name requirement Jagath Jog J (2): iio: Add new event type gesture and use direction for single and double tap iio: accel: bma400: Add support for single and double tap events Jakob Hauser (14): iio: magnetometer: yas530: Change data type of hard_offsets to signed iio: magnetometer: yas530: Change range of data in volatile register iio: magnetometer: yas530: Correct scaling of magnetic axes iio: magnetometer: yas530: Correct temperature handling iio: magnetometer: yas530: Change data type of calibration coefficients iio: magnetometer: yas530: Rename functions and registers iio: magnetometer: yas530: Move printk %*ph parameters out from stack iio: magnetometer: yas530: Apply documentation and style fixes iio: magnetometer: yas530: Introduce "chip_info" structure iio: magnetometer: yas530: Add volatile registers to "chip_info" iio: magnetometer: yas530: Add IIO scaling to "chip_info" iio: magnetometer: yas530: Add temperature calculation to "chip_info" iio: magnetometer: yas530: Add function pointers to "chip_info" iio: magnetometer: yas530: Add YAS537 variant Joe Simmons-Talbott (4): iio: Add blank lines after declarations. iio: Fix indentation for multiline conditional. iio: Add names for function definition arguments. iio: Avoid multiple line dereference for mask Jonathan Cameron (26): iio: ABI: Fix wrong format of differential capacitance channel ABI. staging: iio: cdc: ad7746: Use explicit be24 handling. staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace. staging: iio: cdc: ad7746: Use local buffer for multi byte reads. staging: iio: cdc: ad7746: Factor out ad7746_read_channel() staging: iio: cdc: ad7764: Push locking down into case statements in read/write_raw staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc staging: iio: cdc: ad7746: Drop unused i2c_set_clientdata() staging: iio: cdc: ad7746: Use _raw and _scale for temperature channels. iio: core: Introduce _zeropoint for differential channels staging: iio: cdc: ad7746: Switch from _offset to _zeropoint for differential channels. staging: iio: cdc: ad7746: Use read_avail() rather than opencoding. staging: iio: ad7746: White space cleanup iio: cdc: ad7746: Add device specific ABI documentation. iio: cdc: ad7746: Move driver out of staging. iio: test: Mark file local structure arrays static. iio: light: cm32181: Mark the dev_pm_ops static. staging: iio: frequency: ad9834: Fix alignment for DMA safety staging: iio: meter: ade7854: Fix alignment for DMA safety staging: iio: resolver: ad2s1210: Fix alignment for DMA safety iio: adc: mt6360: Drop an incorrect __maybe_unused marking. iio: magn: hmc5843: Drop excessive indentation of assignments of hmc5843_driver iio: magn: hmc5843: Move struct dev_pm_ops out of header staging: iio: frequency: ad9832: Fix alignment for DMA safety iio: adc: max1363: Drop provision to provide an IIO channel map via platform data iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(). Krzysztof Kozlowski (14): dt-bindings: iio: adc: ti,am3359-adc: add ti,am654-adc dt-bindings: iio: Drop Tomislav Denis iio: MAINTAINERS: Drop Tomislav Denis dt-bindings: iio: adc: Drop Patrick Vasseur dt-bindings: iio: adc: use spi-peripheral-props.yaml dt-bindings: iio: accel: use spi-peripheral-props.yaml dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml dt-bindings: iio: dac: use spi-peripheral-props.yaml dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml dt-bindings: iio: imu: use spi-peripheral-props.yaml dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml dt-bindings: iio: samsung,sensorhub-rinato: use spi-peripheral-props.yaml dt-bindings: iio: temperature: use spi-peripheral-props.yaml Marcus Folkesson (1): MAINTAINERS: Update Microchip MCP3911 to Maintained Marijn Suijten (1): iio: adc: qcom-spmi-adc5: Add missing VCOIN/GPIO[134] channels Martin Larsson (1): iio: adc: imx8qxp-adc: propagate regulator_get_voltage error Nuno Sá (15): iio: inkern: only release the device node when done with it iio: inkern: fix return value in devm_of_iio_channel_get_by_name() iio: inkern: only return error codes in iio_channel_get_*() APIs iio: inkern: split of_iio_channel_get_by_name() iio: inkern: move to fwnode properties thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API iio: adc: ingenic-adc: convert to IIO fwnode interface iio: adc: ab8500-gpadc: convert to device properties iio: adc: at91-sama5d2_adc: convert to device properties iio: adc: qcom-pm8xxx-xoadc: convert to device properties iio: adc: qcom-spmi-vadc: convert to device properties iio: adc: qcom-spmi-adc5: convert to device properties iio: adc: stm32-adc: convert to device properties iio: inkern: remove OF dependencies iio: inkern: fix coding style warnings Oleksij Rempel (3): dt-bindings: iio: adc: ti,tsc2046: add vref-supply property iio: adc: tsc2046: add vref support iio: adc: tsc2046: silent spi_device_id warning Ramona Bolboaca (2): dt-bindings: iio: adc: Add max11205 documentation file iio: adc: add max11205 adc driver Rob Herring (1): dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes Robert Marko (1): iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5 Shreeya Patel (3): dt-bindings: Document ltrf216a light sensor bindings iio: light: Add support for ltrf216a sensor iio: light: ltrf216a: Add raw attribute Uwe Kleine-König (11): iio: adc: ad7124: Benefit from devm_clk_get_enabled() to simplify iio: adc: ad7768-1: Benefit from devm_clk_get_enabled() to simplify iio: adc: ad9467: Benefit from devm_clk_get_enabled() to simplify iio: adc: ingenic-adc: Benefit from devm_clk_get_prepared() to simplify iio: adc: lpc18xx: Benefit from devm_clk_get_enabled() to simplify iio: adc: ti-ads131e08: Benefit from devm_clk_get_enabled() to simplify iio: adc: xilinx-ams: Benefit from devm_clk_get_enabled() to simplify iio: adc: xilinx-xadc: Benefit from devm_clk_get_enabled() to simplify iio: frequency: adf4371: Benefit from devm_clk_get_enabled() to simplify iio: frequency: adrf6780: Benefit from devm_clk_get_enabled() to simplify iio: imu: adis16475: Benefit from devm_clk_get_enabled() to simplify Vincent Whitchurch (1): iio: Use per-device lockdep class for mlock William Breathitt Gray (1): iio: stx104: Move to addac subdirectory Wolfram Sang (2): iio: st_sensors: move from strlcpy with unused retval to strscpy iio: imu: inv_mpu6050: move from strlcpy with unused retval to strscpy wangjianli (1): iio/accel: fix repeated words in comments Documentation/ABI/testing/sysfs-bus-iio | 101 +- Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 | 11 + .../bindings/iio/accel/adi,adis16201.yaml | 7 +- .../bindings/iio/accel/adi,adis16240.yaml | 7 +- .../devicetree/bindings/iio/accel/adi,adxl313.yaml | 7 +- .../devicetree/bindings/iio/accel/adi,adxl345.yaml | 7 +- .../devicetree/bindings/iio/accel/adi,adxl355.yaml | 7 +- .../devicetree/bindings/iio/accel/adi,adxl367.yaml | 7 +- .../devicetree/bindings/iio/accel/adi,adxl372.yaml | 7 +- .../bindings/iio/accel/bosch,bma220.yaml | 7 +- .../bindings/iio/accel/bosch,bma255.yaml | 5 +- .../bindings/iio/accel/bosch,bmi088.yaml | 7 +- .../devicetree/bindings/iio/accel/fsl,mma7455.yaml | 7 +- .../bindings/iio/accel/kionix,kxsd9.yaml | 7 +- .../bindings/iio/accel/memsensing,msa311.yaml | 53 + .../bindings/iio/accel/murata,sca3300.yaml | 5 +- .../bindings/iio/accel/nxp,fxls8962af.yaml | 7 +- .../devicetree/bindings/iio/adc/adi,ad7124.yaml | 7 +- .../devicetree/bindings/iio/adc/adi,ad7192.yaml | 7 +- .../devicetree/bindings/iio/adc/adi,ad7280a.yaml | 7 +- .../devicetree/bindings/iio/adc/adi,ad7292.yaml | 7 +- .../devicetree/bindings/iio/adc/adi,ad7298.yaml | 6 +- .../devicetree/bindings/iio/adc/adi,ad7476.yaml | 8 +- .../devicetree/bindings/iio/adc/adi,ad7606.yaml | 7 +- .../devicetree/bindings/iio/adc/adi,ad7768-1.yaml | 7 +- .../devicetree/bindings/iio/adc/adi,ad7923.yaml | 8 +- .../devicetree/bindings/iio/adc/adi,ad7949.yaml | 7 +- .../devicetree/bindings/iio/adc/holt,hi8435.yaml | 7 +- .../devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 8 +- .../devicetree/bindings/iio/adc/maxim,max1027.yaml | 5 +- .../bindings/iio/adc/maxim,max11100.yaml | 7 +- .../devicetree/bindings/iio/adc/maxim,max1118.yaml | 26 +- .../bindings/iio/adc/maxim,max11205.yaml | 69 + .../devicetree/bindings/iio/adc/maxim,max1241.yaml | 7 +- .../bindings/iio/adc/microchip,mcp3201.yaml | 6 +- .../bindings/iio/adc/microchip,mcp3911.yaml | 5 +- .../bindings/iio/adc/qcom,spmi-vadc.yaml | 1 + .../bindings/iio/adc/richtek,rtq6056.yaml | 56 + .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 + .../devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +- .../devicetree/bindings/iio/adc/ti,adc0832.yaml | 7 +- .../devicetree/bindings/iio/adc/ti,adc084s021.yaml | 7 +- .../devicetree/bindings/iio/adc/ti,adc108s102.yaml | 6 +- .../devicetree/bindings/iio/adc/ti,adc12138.yaml | 7 +- .../devicetree/bindings/iio/adc/ti,adc128s052.yaml | 7 +- .../devicetree/bindings/iio/adc/ti,adc161s626.yaml | 7 +- .../devicetree/bindings/iio/adc/ti,ads1015.yaml | 1 + .../devicetree/bindings/iio/adc/ti,ads124s08.yaml | 7 +- .../devicetree/bindings/iio/adc/ti,ads131e08.yaml | 9 +- .../devicetree/bindings/iio/adc/ti,ads8344.yaml | 7 +- .../devicetree/bindings/iio/adc/ti,ads8688.yaml | 7 +- .../devicetree/bindings/iio/adc/ti,am3359-adc.yaml | 11 +- .../devicetree/bindings/iio/adc/ti,tlc4541.yaml | 7 +- .../devicetree/bindings/iio/adc/ti,tsc2046.yaml | 8 +- .../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 1 + .../bindings/iio/addac/adi,ad74413r.yaml | 1 + .../bindings/iio/amplifiers/adi,ada4250.yaml | 7 +- .../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 1 + .../devicetree/bindings/iio/dac/adi,ad5064.yaml | 7 +- .../devicetree/bindings/iio/dac/adi,ad5360.yaml | 7 +- .../devicetree/bindings/iio/dac/adi,ad5380.yaml | 9 +- .../devicetree/bindings/iio/dac/adi,ad5421.yaml | 7 +- .../devicetree/bindings/iio/dac/adi,ad5449.yaml | 7 +- .../devicetree/bindings/iio/dac/adi,ad5624r.yaml | 9 +- .../devicetree/bindings/iio/dac/adi,ad5686.yaml | 9 +- .../devicetree/bindings/iio/dac/adi,ad5755.yaml | 9 +- .../devicetree/bindings/iio/dac/adi,ad5758.yaml | 4 +- .../devicetree/bindings/iio/dac/adi,ad5761.yaml | 7 +- .../devicetree/bindings/iio/dac/adi,ad5764.yaml | 7 +- .../devicetree/bindings/iio/dac/adi,ad5770r.yaml | 11 +- .../devicetree/bindings/iio/dac/adi,ad5791.yaml | 9 +- .../devicetree/bindings/iio/dac/adi,ad8801.yaml | 7 +- .../devicetree/bindings/iio/dac/adi,ltc2688.yaml | 1 + .../bindings/iio/dac/microchip,mcp4922.yaml | 9 +- .../devicetree/bindings/iio/dac/ti,dac082s085.yaml | 9 +- .../devicetree/bindings/iio/dac/ti,dac7311.yaml | 7 +- .../devicetree/bindings/iio/dac/ti,dac7612.yaml | 7 +- .../devicetree/bindings/iio/frequency/adf4371.yaml | 7 +- .../devicetree/bindings/iio/health/ti,afe4403.yaml | 9 +- .../devicetree/bindings/iio/imu/adi,adis16460.yaml | 7 +- .../devicetree/bindings/iio/imu/adi,adis16480.yaml | 9 +- .../devicetree/bindings/iio/imu/bosch,bmi160.yaml | 7 +- .../bindings/iio/imu/invensense,icm42600.yaml | 6 +- .../bindings/iio/imu/invensense,mpu6050.yaml | 5 +- .../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 7 +- .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 9 +- .../bindings/iio/light/liteon,ltrf216a.yaml | 49 + .../iio/potentiometer/microchip,mcp41010.yaml | 9 +- .../iio/potentiometer/microchip,mcp4131.yaml | 9 +- .../bindings/iio/pressure/asc,dlhl60d.yaml | 2 +- .../bindings/iio/samsung,sensorhub-rinato.yaml | 9 +- .../bindings/iio/temperature/maxim,max31855k.yaml | 4 +- .../bindings/iio/temperature/maxim,max31856.yaml | 6 +- .../bindings/iio/temperature/maxim,max31865.yaml | 6 +- .../bindings/iio/temperature/melexis,mlx90632.yaml | 4 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 40 +- drivers/iio/accel/Kconfig | 13 + drivers/iio/accel/Makefile | 2 + drivers/iio/accel/adxl345_core.c | 7 +- drivers/iio/accel/bma400.h | 14 + drivers/iio/accel/bma400_core.c | 343 ++++- drivers/iio/accel/kxcjk-1013.c | 2 +- drivers/iio/accel/msa311.c | 1321 ++++++++++++++++++++ drivers/iio/adc/Kconfig | 45 +- drivers/iio/adc/Makefile | 3 +- drivers/iio/adc/ab8500-gpadc.c | 27 +- drivers/iio/adc/ad7124.c | 15 +- drivers/iio/adc/ad7768-1.c | 17 +- drivers/iio/adc/ad9467.c | 17 +- drivers/iio/adc/at91-sama5d2_adc.c | 714 +++++++++-- drivers/iio/adc/imx8qxp-adc.c | 8 +- drivers/iio/adc/ingenic-adc.c | 23 +- drivers/iio/adc/lpc18xx_adc.c | 18 +- drivers/iio/adc/max11205.c | 183 +++ drivers/iio/adc/max1363.c | 6 - drivers/iio/adc/mt6360-adc.c | 2 +- drivers/iio/adc/qcom-pm8xxx-xoadc.c | 58 +- drivers/iio/adc/qcom-spmi-adc5.c | 73 +- drivers/iio/adc/qcom-spmi-vadc.c | 44 +- drivers/iio/adc/rtq6056.c | 661 ++++++++++ drivers/iio/adc/stm32-adc.c | 128 +- drivers/iio/adc/ti-ads131e08.c | 19 +- drivers/iio/adc/ti-tsc2046.c | 69 +- drivers/iio/adc/xilinx-ams.c | 15 +- drivers/iio/adc/xilinx-xadc-core.c | 18 +- drivers/iio/addac/Kconfig | 16 + drivers/iio/addac/Makefile | 1 + drivers/iio/{adc => addac}/stx104.c | 0 drivers/iio/cdc/Kconfig | 10 + drivers/iio/cdc/Makefile | 1 + drivers/{staging => }/iio/cdc/ad7746.c | 441 ++++--- drivers/iio/common/scmi_sensors/scmi_iio.c | 8 +- drivers/iio/common/st_sensors/st_sensors_core.c | 2 +- drivers/iio/frequency/adf4371.c | 17 +- drivers/iio/frequency/admv1014.c | 3 +- drivers/iio/frequency/adrf6780.c | 16 +- drivers/iio/imu/adis16475.c | 15 +- drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 4 +- drivers/iio/industrialio-buffer.c | 5 +- drivers/iio/industrialio-core.c | 19 +- drivers/iio/industrialio-event.c | 14 +- drivers/iio/industrialio-trigger.c | 1 + drivers/iio/inkern.c | 272 ++-- drivers/iio/light/Kconfig | 11 + drivers/iio/light/Makefile | 1 + drivers/iio/light/cm32181.c | 2 +- drivers/iio/light/ltrf216a.c | 550 ++++++++ drivers/iio/magnetometer/Kconfig | 4 +- drivers/iio/magnetometer/hmc5843.h | 13 +- drivers/iio/magnetometer/hmc5843_core.c | 8 +- drivers/iio/magnetometer/hmc5843_i2c.c | 2 +- drivers/iio/magnetometer/hmc5843_spi.c | 14 +- drivers/iio/magnetometer/yamaha-yas530.c | 855 ++++++++++--- drivers/iio/pressure/dlhl60d.c | 5 +- drivers/iio/pressure/icp10100.c | 10 +- drivers/iio/temperature/mlx90632.c | 61 +- drivers/iio/test/iio-test-rescale.c | 4 +- drivers/staging/iio/Kconfig | 1 - drivers/staging/iio/Makefile | 1 - drivers/staging/iio/cdc/Kconfig | 17 - drivers/staging/iio/cdc/Makefile | 6 - drivers/staging/iio/frequency/ad9832.c | 4 +- drivers/staging/iio/frequency/ad9834.c | 2 +- drivers/staging/iio/meter/ade7854.h | 2 +- drivers/staging/iio/resolver/ad2s1210.c | 4 +- drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 3 +- include/dt-bindings/iio/adc/at91-sama5d2_adc.h | 3 + include/linux/iio/consumer.h | 28 +- include/linux/iio/iio-opaque.h | 2 + include/linux/iio/iio.h | 8 +- include/linux/iio/types.h | 3 + include/linux/string_helpers.h | 5 + include/linux/units.h | 3 + include/uapi/linux/iio/types.h | 3 + tools/iio/iio_event_monitor.c | 8 +- 176 files changed, 5990 insertions(+), 1351 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 create mode 100644 Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml create mode 100644 drivers/iio/accel/msa311.c create mode 100644 drivers/iio/adc/max11205.c create mode 100644 drivers/iio/adc/rtq6056.c rename drivers/iio/{adc => addac}/stx104.c (100%) rename drivers/{staging => }/iio/cdc/ad7746.c (66%) create mode 100644 drivers/iio/light/ltrf216a.c delete mode 100644 drivers/staging/iio/cdc/Kconfig delete mode 100644 drivers/staging/iio/cdc/Makefile
