The spi-cpha and spi-cpol properties are device specific and should be
accepted only if device really needs them. Explicitly list them in
device bindings in preparation of their removal from generic
spi-peripheral-props.yaml schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../devicetree/bindings/net/nfc/marvell,nci.yaml | 12 ++++++++++--
.../devicetree/bindings/net/vertexcom-mse102x.yaml | 12 +++++++++---
2 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
index 1bcaf6ba822c..00b3918a9bf2 100644
--- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
@@ -56,8 +56,16 @@ properties:
description: |
For UART type of connection. Specifies that the chip is using RTS/CTS.
- spi-cpha: true
- spi-cpol: true
+ spi-cpha:
+ type: boolean
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ type: boolean
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
+
spi-max-frequency: true
required:
diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
index 8156a9aeb589..9dc1609f6d06 100644
--- a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
+++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
@@ -34,9 +34,15 @@ properties:
interrupts:
maxItems: 1
- spi-cpha: true
-
- spi-cpol: true
+ spi-cpha:
+ type: boolean
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ type: boolean
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
spi-max-frequency:
minimum: 6000000
--
2.34.1
