This patchset adds support for ltrf216a Ambient Light Sensor and documents the DT bindings for the same. Changes in v9 - Add LTRF216A_MAIN_STATUS register in volatile function. - Update the datasheet link. Changes in v8 - Add caching mechanism to restore register state after h/w resume. - Add callback functions and disable locking in regmap config. - Update mutex comment as per it's current scope in the driver. - Add Shreeya as author of the driver. - Make some minor cleanups. Changes in v7 - Add regmap support. - Fix runtime power management implementation. - Fix the ordering of devm and non-devm functions. - Use DEFINE_RUNTIME_DEV_PM_OPS macro - Fix the error reported by kernel test robot for bindings. Changes in v6 - Fix some errors reported by kernel test robot. - Add protocol details for the datasheet link. - Remove useless assignments. - Add unit details for read data delay macro. - Use pm_sleep_ptr(). Changes in v5 - Add power management support. - Add reset functionality. - Use readx_poll_timeout() to get data. - Cleanup some of the redundant code. - Update int_time_fac after I2C write is successful. - Rename mutex to lock. - Use Reverse Xmas tree pattern for all variable definitions. - Improve error handling messages and add error codes. - Add one more MODULE_AUTHOR. - Remove cleardata which was reading data for infrared light. - Remove patch for deprecated vendor prefix [PATCH v4 3/3]. - Remove deprecated string from DT binding document. Changes in v4 - Add more descriptive comment for mutex lock - Fix mutex locking in read_raw() - Use i2c_smbus_read_i2c_block_data() Changes in v3 - Use u16 instead of u8 for int_time_fac - Reorder headers in ltrf216a.c file - Remove int_time_mapping table and use int_time_available - Fix indentation in the bindings file. Changes in v2 - Add support for 25ms and 50ms integration time. - Rename some of the macros as per names given in datasheet - Add a comment for the mutex lock - Use read_avail callback instead of attributes and set the appropriate _available bit. - Use FIELD_PREP() at appropriate places. - Add a constant lookup table for integration time and reg val - Use BIT() macro for magic numbers. - Improve error handling at few places. - Use get_unaligned_le24() and div_u64() - Use probe_new() callback and devm functions - Return errors in probe using dev_err_probe() - Use DEFINE_SIMPLE_DEV_PM_OPS() - Correct the formula for lux to use 0.45 instead of 0.8 - Add interrupt and power supply property in DT bindings - Add vendor prefix name as per the alphabetical order. Shreeya Patel (2): dt-bindings: Document ltrf216a light sensor bindings iio: light: Add support for ltrf216a sensor .../bindings/iio/light/liteon,ltrf216a.yaml | 49 ++ drivers/iio/light/Kconfig | 11 + drivers/iio/light/Makefile | 1 + drivers/iio/light/ltrf216a.c | 523 ++++++++++++++++++ 4 files changed, 584 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml create mode 100644 drivers/iio/light/ltrf216a.c -- 2.30.2