Re: [PATCH v4 08/10] iio: magnetometer: yas530: Apply documentation and style fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 4, 2022 at 12:03 AM Jakob Hauser <jahau@xxxxxxxxxxxxxx> wrote:
>
> This commit gathers several minor changes.
>
> In the device examples, "Xiaomi" is too generic, specific devices should be
> listed here. E.g. Xiaomi Redmi 2 seems to have YAS537 but it's not fully clear
> if this applies to all its variants. Samsung Galaxy S7 is often quoted in
> conjunction with YAS537.
>
> Removed defines for device IDs of YAS537 and YAS539, they are not needed so far.

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Signed-off-by: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
> ---
>  drivers/iio/magnetometer/yamaha-yas530.c | 21 +++++++++++----------
>  1 file changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
> index 8358d4b3d1e2..4e2f460a4efd 100644
> --- a/drivers/iio/magnetometer/yamaha-yas530.c
> +++ b/drivers/iio/magnetometer/yamaha-yas530.c
> @@ -10,7 +10,7 @@
>   * (YAS534 is a magnetic switch, not handled)
>   * YAS535 MS-6C
>   * YAS536 MS-3W
> - * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Xiaomi)
> + * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Galaxy S7)
>   * YAS539 MS-3S (2018 Samsung Galaxy A7 SM-A750FN)
>   *
>   * Code functions found in the MPU3050 YAS530 and YAS532 drivers
> @@ -93,10 +93,6 @@
>  #define YAS532_DATA_OVERFLOW           (BIT(YAS532_DATA_BITS) - 1)
>  #define YAS532_20DEGREES               390 /* Counts starting at -50 °C */
>
> -/* These variant IDs are known from code dumps */
> -#define YAS537_DEVICE_ID               0x07 /* YAS537 (MS-3T) */
> -#define YAS539_DEVICE_ID               0x08 /* YAS539 (MS-3S) */
> -
>  /* Turn off device regulators etc after 5 seconds of inactivity */
>  #define YAS5XX_AUTOSUSPEND_DELAY_MS    5000
>
> @@ -323,7 +319,7 @@ static int yas530_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo,
>  {
>         struct yas5xx_calibration *c = &yas5xx->calibration;
>         u16 t_ref, t, x, y1, y2;
> -       /* These are "signed x, signed y1 etc */
> +       /* These are signed x, signed y1 etc */
>         s32 sx, sy1, sy2, sy, sz;
>         int ret;
>
> @@ -663,7 +659,10 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx)
>                 return ret;
>         dev_dbg(yas5xx->dev, "calibration data: %16ph\n", data);
>
> +       /* Contribute calibration data to the input pool for kernel entropy */
>         add_device_randomness(data, sizeof(data));
> +
> +       /* Extract version */
>         yas5xx->version = data[15] & GENMASK(1, 0);
>
>         /* Extract the calibration from the bitfield */
> @@ -690,6 +689,7 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx)
>         c->r[0] = sign_extend32(FIELD_GET(GENMASK(28, 23), val), 5);
>         c->r[1] = sign_extend32(FIELD_GET(GENMASK(20, 15), val), 5);
>         c->r[2] = sign_extend32(FIELD_GET(GENMASK(12, 7), val), 5);
> +
>         return 0;
>  }
>
> @@ -711,12 +711,12 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
>         dev_dbg(yas5xx->dev, "calibration data: %14ph\n", data);
>
>         /* Sanity check, is this all zeroes? */
> -       if (memchr_inv(data, 0x00, 13) == NULL) {
> -               if (!(data[13] & BIT(7)))
> -                       dev_warn(yas5xx->dev, "calibration is blank!\n");
> -       }
> +       if (!memchr_inv(data, 0x00, 13) && !(data[13] & BIT(7)))
> +               dev_warn(yas5xx->dev, "calibration is blank!\n");
>
> +       /* Contribute calibration data to the input pool for kernel entropy */
>         add_device_randomness(data, sizeof(data));
> +
>         /* Only one bit of version info reserved here as far as we know */
>         yas5xx->version = data[13] & BIT(0);
>
> @@ -725,6 +725,7 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
>         c->Cy1 = data[1] * 10 - 1280;
>         c->Cy2 = data[2] * 10 - 1280;
>         yas530_extract_calibration(&data[3], c);
> +
>         /*
>          * Extract linearization:
>          * Linearization layout in the 32 bits at byte 10:
> --
> 2.35.1
>


-- 
With Best Regards,
Andy Shevchenko




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux