Re: [PATCH v14 05/10] iio: adc: qcom-spmi-rradc: introduce round robin adc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 9 May 2022 12:53:12 +0100
Caleb Connolly <caleb.connolly@xxxxxxxxxx> wrote:

> On 01/05/2022 18:38, Jonathan Cameron wrote:
> > On Fri, 29 Apr 2022 23:09:00 +0100
> > Caleb Connolly <caleb.connolly@xxxxxxxxxx> wrote:
> >   
> >> The Round Robin ADC is responsible for reading data about the rate of
> >> charge from the USB or DC input ports, it can also read the battery
> >> ID (resistence), skin temperature and the die temperature of the pmic.
> >> It is found on the PMI8998 and PM660 Qualcomm PMICs.
> >>
> >> Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>  
> > Hi Caleb,  
> Hi Jonathan,
> 
> Thanks for spotting this, I completely missed it... Yeah this should be 
> IIO_INFO_PROCESSED, the battery ID calculation doesn't fit in the 
> raw/offset/scale format.
> > 
> > I took another quick read through of this and noticed that the battery channel
> > is providing on IIO_INFO_RAW but there is code for IIO_INFO_PROCESSED.
> > 
> > Something gone wrong along the way?  If all we need is to change it to
> > BIT(IIO_INFO_PROCESSED) I can do that whilst applying or you can do a v15 if
> > you prefer.  
> That would be hugely appreciated, thanks a lot.
> > 
Given other reply I just sent suggesting you do a v15 and Lee might
want to just pick up the series, with above fixed.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

Either way works as long as there is an immutable branch somewhere.

Thanks,

Jonathan

> > Thanks,
> > 
> > Jonathan
> >   
> >> ---  
> >   
> >> diff --git a/drivers/iio/adc/qcom-spmi-rradc.c b/drivers/iio/adc/qcom-spmi-rradc.c
> >> new file mode 100644
> >> index 000000000000..c437546d8a4c
> >> --- /dev/null
> >> +++ b/drivers/iio/adc/qcom-spmi-rradc.c  
> > 
> > 
> > ..
> >   
> >> +
> >> +/*
> >> + * These functions explicitly cast int64_t to int.
> >> + * They will never overflow, as the values are small enough.  
> > 
> > See below. I don't think this gets used...
> >   
> >> + */
> >> +static int rradc_post_process_batt_id(struct rradc_chip *chip, u16 adc_code,
> >> +				      int *result_ohms)
> >> +{
> >> +	uint32_t current_value;
> >> +	int64_t r_id;
> >> +
> >> +	current_value = chip->batt_id_data;
> >> +	r_id = ((int64_t)adc_code * RR_ADC_FS_VOLTAGE_MV);
> >> +	r_id = div64_s64(r_id, (RR_ADC_CHAN_MSB * current_value));
> >> +	*result_ohms = (int)(r_id * MILLI);
> >> +
> >> +	return 0;
> >> +}
> >> +  
> > 
> >   
> >> +
> >> +static int rradc_read_raw(struct iio_dev *indio_dev,
> >> +			  struct iio_chan_spec const *chan_spec, int *val,
> >> +			  int *val2, long mask)
> >> +{
> >> +	struct rradc_chip *chip = iio_priv(indio_dev);
> >> +	const struct rradc_channel *chan;
> >> +	int ret;
> >> +	u16 adc_code;
> >> +
> >> +	if (chan_spec->address >= RR_ADC_CHAN_MAX) {
> >> +		dev_err(chip->dev, "Invalid channel index:%lu\n",
> >> +			chan_spec->address);
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	switch (mask) {
> >> +	case IIO_CHAN_INFO_SCALE:
> >> +		return rradc_read_scale(chip, chan_spec->address, val, val2);
> >> +	case IIO_CHAN_INFO_OFFSET:
> >> +		return rradc_read_offset(chip, chan_spec->address, val);
> >> +	case IIO_CHAN_INFO_RAW:
> >> +		ret = rradc_do_conversion(chip, chan_spec->address, &adc_code);
> >> +		if (ret < 0)
> >> +			return ret;
> >> +
> >> +		*val = adc_code;
> >> +		return IIO_VAL_INT;
> >> +	case IIO_CHAN_INFO_PROCESSED:  
> > 
> > This doesn't seem to apply to any channels....
> >   
> >> +		chan = &rradc_chans[chan_spec->address];
> >> +		if (!chan->scale_fn)
> >> +			return -EINVAL;
> >> +		ret = rradc_do_conversion(chip, chan_spec->address, &adc_code);
> >> +		if (ret < 0)
> >> +			return ret;
> >> +
> >> +		*val = chan->scale_fn(chip, adc_code, val);
> >> +		return IIO_VAL_INT;
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >> +}
> >> +
> >> +static int rradc_read_label(struct iio_dev *indio_dev,
> >> +			    struct iio_chan_spec const *chan, char *label)
> >> +{
> >> +	return snprintf(label, PAGE_SIZE, "%s\n",
> >> +			rradc_chans[chan->address].label);
> >> +}
> >> +
> >> +static const struct iio_info rradc_info = {
> >> +	.read_raw = rradc_read_raw,
> >> +	.read_label = rradc_read_label,
> >> +};
> >> +
> >> +static const struct rradc_channel rradc_chans[RR_ADC_CHAN_MAX] = {
> >> +	{
> >> +		.label = "batt_id",
> >> +		.scale_fn = rradc_post_process_batt_id,
> >> +		.lsb = RR_ADC_BATT_ID_5_LSB,
> >> +		.status = RR_ADC_BATT_ID_STS,
> >> +		.size = 6,
> >> +		.trigger_addr = RR_ADC_BATT_ID_TRIGGER,
> >> +		.trigger_mask = BIT(0),
> >> +	}, {
> >> +		.label = "batt",
> >> +		.lsb = RR_ADC_BATT_THERM_LSB,
> >> +		.status = RR_ADC_BATT_THERM_STS,
> >> +		.size = 2,
> >> +		.trigger_addr = RR_ADC_BATT_THERM_TRIGGER,
> >> +	}, {
> >> +		.label = "pmi8998_skin",
> >> +		.lsb = RR_ADC_SKIN_TEMP_LSB,
> >> +		.status = RR_ADC_AUX_THERM_STS,
> >> +		.size = 2,
> >> +		.trigger_addr = RR_ADC_AUX_THERM_TRIGGER,
> >> +	}, {
> >> +		.label = "usbin_i",
> >> +		.lsb = RR_ADC_USB_IN_I_LSB,
> >> +		.status = RR_ADC_USB_IN_I_STS,
> >> +		.size = 2,
> >> +		.trigger_addr = RR_ADC_USB_IN_I_TRIGGER,
> >> +	}, {
> >> +		.label = "usbin_v",
> >> +		.lsb = RR_ADC_USB_IN_V_LSB,
> >> +		.status = RR_ADC_USB_IN_V_STS,
> >> +		.size = 2,
> >> +		.trigger_addr = RR_ADC_USB_IN_V_TRIGGER,
> >> +		.trigger_mask = BIT(7),
> >> +	}, {
> >> +		.label = "dcin_i",
> >> +		.lsb = RR_ADC_DC_IN_I_LSB,
> >> +		.status = RR_ADC_DC_IN_I_STS,
> >> +		.size = 2,
> >> +		.trigger_addr = RR_ADC_DC_IN_I_TRIGGER,
> >> +	}, {
> >> +		.label = "dcin_v",
> >> +		.lsb = RR_ADC_DC_IN_V_LSB,
> >> +		.status = RR_ADC_DC_IN_V_STS,
> >> +		.size = 2,
> >> +		.trigger_addr = RR_ADC_DC_IN_V_TRIGGER,
> >> +	}, {
> >> +		.label = "pmi8998_die",
> >> +		.lsb = RR_ADC_PMI_DIE_TEMP_LSB,
> >> +		.status = RR_ADC_PMI_DIE_TEMP_STS,
> >> +		.size = 2,
> >> +		.trigger_addr = RR_ADC_PMI_DIE_TEMP_TRIGGER,
> >> +		.trigger_mask = RR_ADC_TRIGGER_EVERY_CYCLE,
> >> +	}, {
> >> +		.label = "chg",
> >> +		.lsb = RR_ADC_CHARGER_TEMP_LSB,
> >> +		.status = RR_ADC_CHARGER_TEMP_STS,
> >> +		.size = 2,
> >> +		.trigger_addr = RR_ADC_CHARGER_TEMP_TRIGGER,
> >> +	}, {
> >> +		.label = "gpio",
> >> +		.lsb = RR_ADC_GPIO_LSB,
> >> +		.status = RR_ADC_GPIO_STS,
> >> +		.size = 2,
> >> +		.trigger_addr = RR_ADC_GPIO_TRIGGER,
> >> +	},
> >> +};
> >> +
> >> +static const struct iio_chan_spec rradc_iio_chans[RR_ADC_CHAN_MAX] = {
> >> +	{
> >> +		.type = IIO_RESISTANCE,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> >> +		.address = RR_ADC_BATT_ID,
> >> +		.channel = 0,
> >> +		.indexed = 1,
> >> +	}, {
> >> +		.type = IIO_TEMP,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> >> +		.address = RR_ADC_BATT_THERM,
> >> +		.channel = 0,
> >> +		.indexed = 1,
> >> +	}, {
> >> +		.type = IIO_TEMP,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> +				      BIT(IIO_CHAN_INFO_SCALE) |
> >> +				      BIT(IIO_CHAN_INFO_OFFSET),
> >> +		.address = RR_ADC_SKIN_TEMP,
> >> +		.channel = 1,
> >> +		.indexed = 1,
> >> +	}, {
> >> +		.type = IIO_CURRENT,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> +				      BIT(IIO_CHAN_INFO_SCALE),
> >> +		.address = RR_ADC_USBIN_I,
> >> +		.channel = 0,
> >> +		.indexed = 1,
> >> +	}, {
> >> +		.type = IIO_VOLTAGE,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> +				      BIT(IIO_CHAN_INFO_SCALE),
> >> +		.address = RR_ADC_USBIN_V,
> >> +		.channel = 0,
> >> +		.indexed = 1,
> >> +	}, {
> >> +		.type = IIO_CURRENT,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> +				      BIT(IIO_CHAN_INFO_SCALE),
> >> +		.address = RR_ADC_DCIN_I,
> >> +		.channel = 1,
> >> +		.indexed = 1,
> >> +	}, {
> >> +		.type = IIO_VOLTAGE,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> +				      BIT(IIO_CHAN_INFO_SCALE),
> >> +		.address = RR_ADC_DCIN_V,
> >> +		.channel = 1,
> >> +		.indexed = 1,
> >> +	}, {
> >> +		.type = IIO_TEMP,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> +				      BIT(IIO_CHAN_INFO_SCALE) |
> >> +				      BIT(IIO_CHAN_INFO_OFFSET),
> >> +		.address = RR_ADC_DIE_TEMP,
> >> +		.channel = 2,
> >> +		.indexed = 1,
> >> +	}, {
> >> +		.type = IIO_TEMP,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> +				      BIT(IIO_CHAN_INFO_OFFSET) |
> >> +				      BIT(IIO_CHAN_INFO_SCALE),
> >> +		.address = RR_ADC_CHG_TEMP,
> >> +		.channel = 3,
> >> +		.indexed = 1,
> >> +	}, {
> >> +		.type = IIO_VOLTAGE,
> >> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> +				      BIT(IIO_CHAN_INFO_SCALE),
> >> +		.address = RR_ADC_GPIO,
> >> +		.channel = 2,
> >> +		.indexed = 1,
> >> +	},
> >> +};
> >> +  
> >   
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux