Looks like YAS530 raw values return picotesla and YAS532 nanotesla. Adapt
comments and scaling.
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/iio/magnetometer/yamaha-yas530.c | 28 +++++++++++++++---------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index 2d71ae837bf5..40c81c082782 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -310,8 +310,6 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
* @yo: Y axis out
* @zo: Z axis out
* @return: 0 on success or error code
- *
- * Returned values are in nanotesla according to some code.
*/
static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
{
@@ -417,14 +415,24 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev,
*val = 1;
return IIO_VAL_INT;
}
- /*
- * The axis values are in nanotesla according to the vendor
- * drivers, but is clearly in microtesla according to
- * experiments. Since 1 uT = 0.01 Gauss, we need to divide
- * by 100000000 (10^8) to get to Gauss from the raw value.
- */
- *val = 1;
- *val2 = 100000000;
+ switch (yas5xx->devid) {
+ case YAS530_DEVICE_ID:
+ /*
+ * Raw values of YAS530 are in picotesla. Devide by
+ * 100000000 (10^8) to get Gauss.
+ */
+ *val = 1;
+ *val2 = 100000000;
+ break;
+ case YAS532_DEVICE_ID:
+ /*
+ * Raw values of YAS532 are in nanotesla. Devide by
+ * 100000 (10^5) to get Gauss.
+ */
+ *val = 1;
+ *val2 = 100000;
+ break;
+ }
return IIO_VAL_FRACTIONAL;
default:
/* Unknown request */
--
2.35.1
