On Thu, 9 Jun 2022 11:31:57 +0300 Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> wrote: > Hi, > > The following series add support for temperature sensor available on > SAMA7G5. > > Temperature sensor available on SAMA7G5 provides 2 outputs VTEMP and VBG. > VTEMP is proportional to the absolute temperature voltage and VBG is a > quasi-temperature independent voltage. Both are necessary in computing > the temperature (for better accuracy). Also, for better accuracy the > following settings were imposed when measusing the temperature: > oversampling rate of 256, sampling frequency of 10MHz, a startup time of > 512 ticks, MR.tracktim=0xf, EMR.trackx=0x3. > > For computing the temperature measured by ADC calibration data is > necessary. This is provided via OTP memory available on SAMA7G5. > > Patches 1/16-3/16 provides some fixes. > Patches 3/16-12/16 prepares for the addition of temperature sensor > support. > Patch 13/16 adds the temperature sensor support. > > Along with temperature sensor support I took the chance and added > runtime PM support in this series, too (handled in patch 15/16). > > The rest of patches in this series are minor cleanups. > > Thank you, > Claudiu Beznea Hi CLaudiu, Those patches I haven't replied to individually look good to me. Thanks, Jonathan > > Claudiu Beznea (16): > iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX > iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq > iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are > enabled > iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw > versions > iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data > iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio > iio: adc: at91-sama5d2_adc: simplify the code in > at91_adc_read_info_raw() > iio: adc: at91-sama5d2_adc: move oversampling storage in its function > iio: adc: at91-sama5d2_adc: update trackx on emr > iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for > at91_adc_setup_samp_freq() > iio: adc: at91-sama5d2_adc: add locking parameter to > at91_adc_read_info_raw() > dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature > channel > iio: adc: at91-sama5d2_adc: add support for temperature sensor > iio: adc: at91-sama5d2_adc: add empty line after functions > iio: adc: at91-sama5d2_adc: add runtime pm support > iio: adc: at91-sama5d2_adc: use pm_ptr() > > drivers/iio/adc/at91-sama5d2_adc.c | 633 +++++++++++++++--- > .../dt-bindings/iio/adc/at91-sama5d2_adc.h | 3 + > 2 files changed, 548 insertions(+), 88 deletions(-) >
