From: Andrea Merello <andrea.merello@xxxxxx> Add ABI documentation for bno055 driver private sysfs attributes. Signed-off-by: Andrea Merello <andrea.merello@xxxxxx> --- .../ABI/testing/sysfs-bus-iio-bno055 | 81 +++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-bno055 diff --git a/Documentation/ABI/testing/sysfs-bus-iio-bno055 b/Documentation/ABI/testing/sysfs-bus-iio-bno055 new file mode 100644 index 000000000000..22a5c6dc90dc --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-bno055 @@ -0,0 +1,81 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Raw (unscaled) range for acceleration readings. Unit after + application of scale is m/s^2. Note that this doesn't affects + the scale (which should be used when changing the maximum and + minimum readable value affects also the reading scaling factor). + +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Range for angular velocity readings in radians per second. Note + that this does not affects the scale (which should be used when + changing the maximum and minimum readable value affects also the + reading scaling factor). + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + List of allowed values for in_accel_raw_range attribute + +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + List of allowed values for in_anglvel_raw_range attribute + +What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Can be 1 or 0. Enables/disables the "Fast Magnetometer + Calibration" HW function. + +What: /sys/bus/iio/devices/iio:deviceX/fusion_enable +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a. + NDOF) HW function. + +What: /sys/bus/iio/devices/iio:deviceX/calibration_data +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Reports the binary calibration data blob for the IMU sensors. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Reports the autocalibration status for the accelerometer sensor. + Can be 0 (calibration non even enabled) or 1 to 5 where the greater + the number, the better the calibration status. + +What: /sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Reports the autocalibration status for the gyroscope sensor. + Can be 0 (calibration non even enabled) or 1 to 5 where the greater + the number, the better the calibration status. + +What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Reports the autocalibration status for the magnetometer sensor. + Can be 0 (calibration non even enabled) or 1 to 5 where the greater + the number, the better the calibration status. + +What: /sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status +KernelVersion: 5.19 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Reports the status for the IMU overall autocalibration. + Can be 0 (calibration non even enabled) or 1 to 5 where the greater + the number, the better the calibration status. -- 2.17.1
