wait_for_completion_timeout() returns unsigned long not long.
it returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case
Fixes: e813dde6f833 ("iio: stmpe-adc: Use wait_for_completion_timeout")
Signed-off-by: Miaoqian Lin <linmq006@xxxxxxxxx>
---
drivers/iio/adc/stmpe-adc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
index d2d405388499..d475d1c17bfc 100644
--- a/drivers/iio/adc/stmpe-adc.c
+++ b/drivers/iio/adc/stmpe-adc.c
@@ -61,7 +61,7 @@ struct stmpe_adc {
static int stmpe_read_voltage(struct stmpe_adc *info,
struct iio_chan_spec const *chan, int *val)
{
- long ret;
+ unsigned long ret;
mutex_lock(&info->lock);
@@ -79,7 +79,7 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
- if (ret <= 0) {
+ if (ret == 0) {
stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA,
STMPE_ADC_CH(info->channel));
mutex_unlock(&info->lock);
--
2.17.1
