For Semtech sensors SX9324 and SX9360, allow confugration of the pre-charge resistor (9324/9360) and internal resistor (9324). Fix register name spelling mistakes first and set default value properly for sx9324 internal resistor register. The 9360 changes are independent from the 9324 changes, but they are very similar. Changes since v3: - Rename reserved field as _RESERVED_ - Fix invalid string matching with match_string() - Fix cut and paste error in device tree bindings. Changes since v2: - use -ohms instead of -kohms, as ohms is a defined unit in dt-schema.git dtschema/schemas/property-units.yaml Changes sinve v1: - Add kOhm Unit, add a new patch to fix invalid register setting. Gwendal Grignou (8): iio: sx9324: Fix default precharge internal resistance register iio: sx9324: Fix register field spelling dt-bindings: iio: sx9324: Add precharge resistor setting iio: sx9324: Add precharge internal resistance setting dt-bindings: iio: sx9324: Add internal compensation resistor setting iio: sx9324: Add Setting for internal compensation resistor dt-bindings: iio: sx9360: Add precharge resistor setting iio: sx9360: Add pre-charge resistor setting .../iio/proximity/semtech,sx9324.yaml | 19 +++++++++ .../iio/proximity/semtech,sx9360.yaml | 9 ++++ drivers/iio/proximity/sx9324.c | 41 ++++++++++++++++--- drivers/iio/proximity/sx9360.c | 12 +++++- 4 files changed, 75 insertions(+), 6 deletions(-) -- 2.35.1.1094.g7c7d902a7c-goog
