Re: [PATCH v5 10/10] iio: adc: ti-ads1015: Switch to read_avail

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 30 Mar 2022 17:52:52 +0300
Andy Shevchenko <andriy.shevchenko@xxxxxxxxx> wrote:

> On Mon, Mar 28, 2022 at 09:47:25PM +0200, Marek Vasut wrote:
> > Replace sysfs attributes with read_avail() callback. This also permits
> > removal of ads1115_info, since the scale attribute tables are now part
> > of chip data.  
> 
> For the entire series,
> Reviewed-by: Andy Shevchenko <andy@xxxxxxxxxx>
That reminds me... Marek, please use a cover letter for multi-patch
series.  If nothing else it provides a convenient place for people to
reply like Andy has done here that will get picked up when I use b4 to
grab the patch series.

Saves me a bit of time.

Anyhow, applied to the togreg branch of iio.git and pushed out as
testing for 0-day to take a look. Note I'll be rebasing on rc1 when
available before exposing this to linux-next.

Thanks,

Jonathan

> 
> > Signed-off-by: Marek Vasut <marex@xxxxxxx>
> > Cc: Andy Shevchenko <andy@xxxxxxxxxx>
> > Cc: Daniel Baluta <daniel.baluta@xxxxxxx>
> > Cc: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > ---
> > V3: New patch
> > V4: - Reformat ads1x15 scale ranges pairwise
> >     - Turn the scale ranges into unsigned int
> > V5: Switch scale to signed int
> > ---
> >  drivers/iio/adc/ti-ads1015.c | 112 +++++++++++++++++++++--------------
> >  1 file changed, 67 insertions(+), 45 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
> > index 42ec4e5c2516e..5544da80b6369 100644
> > --- a/drivers/iio/adc/ti-ads1015.c
> > +++ b/drivers/iio/adc/ti-ads1015.c
> > @@ -81,6 +81,9 @@ struct ads1015_chip_data {
> >  	int				num_channels;
> >  	const struct iio_info		*info;
> >  	const int			*data_rate;
> > +	const int			data_rate_len;
> > +	const int			*scale;
> > +	const int			scale_len;
> >  	bool				has_comparator;
> >  };
> >  
> > @@ -108,10 +111,28 @@ static const int ads1115_data_rate[] = {
> >   * Translation from PGA bits to full-scale positive and negative input voltage
> >   * range in mV
> >   */
> > -static int ads1015_fullscale_range[] = {
> > +static const int ads1015_fullscale_range[] = {
> >  	6144, 4096, 2048, 1024, 512, 256, 256, 256
> >  };
> >  
> > +static const int ads1015_scale[] = {	/* 12bit ADC */
> > +	256, 11,
> > +	512, 11,
> > +	1024, 11,
> > +	2048, 11,
> > +	4096, 11,
> > +	6144, 11
> > +};
> > +
> > +static const int ads1115_scale[] = {	/* 16bit ADC */
> > +	256, 15,
> > +	512, 15,
> > +	1024, 15,
> > +	2048, 15,
> > +	4096, 15,
> > +	6144, 15
> > +};
> > +
> >  /*
> >   * Translation from COMP_QUE field value to the number of successive readings
> >   * exceed the threshold values before an interrupt is generated
> > @@ -166,6 +187,9 @@ static const struct iio_event_spec ads1015_events[] = {
> >  	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
> >  				BIT(IIO_CHAN_INFO_SCALE) |	\
> >  				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
> > +	.info_mask_shared_by_all_available =			\
> > +				BIT(IIO_CHAN_INFO_SCALE) |	\
> > +				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
> >  	.scan_index = _addr,					\
> >  	.scan_type = {						\
> >  		.sign = 's',					\
> > @@ -189,6 +213,9 @@ static const struct iio_event_spec ads1015_events[] = {
> >  	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
> >  				BIT(IIO_CHAN_INFO_SCALE) |	\
> >  				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
> > +	.info_mask_shared_by_all_available =			\
> > +				BIT(IIO_CHAN_INFO_SCALE) |	\
> > +				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
> >  	.scan_index = _addr,					\
> >  	.scan_type = {						\
> >  		.sign = 's',					\
> > @@ -470,7 +497,7 @@ static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
> >  {
> >  	int i;
> >  
> > -	for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) {
> > +	for (i = 0; i < data->chip->data_rate_len; i++) {
> >  		if (data->chip->data_rate[i] == rate) {
> >  			data->channel_data[chan].data_rate = i;
> >  			return 0;
> > @@ -480,6 +507,32 @@ static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
> >  	return -EINVAL;
> >  }
> >  
> > +static int ads1015_read_avail(struct iio_dev *indio_dev,
> > +			      struct iio_chan_spec const *chan,
> > +			      const int **vals, int *type, int *length,
> > +			      long mask)
> > +{
> > +	struct ads1015_data *data = iio_priv(indio_dev);
> > +
> > +	if (chan->type != IIO_VOLTAGE)
> > +		return -EINVAL;
> > +
> > +	switch (mask) {
> > +	case IIO_CHAN_INFO_SCALE:
> > +		*type = IIO_VAL_FRACTIONAL_LOG2;
> > +		*vals =  data->chip->scale;
> > +		*length = data->chip->scale_len;
> > +		return IIO_AVAIL_LIST;
> > +	case IIO_CHAN_INFO_SAMP_FREQ:
> > +		*type = IIO_VAL_INT;
> > +		*vals = data->chip->data_rate;
> > +		*length = data->chip->data_rate_len;
> > +		return IIO_AVAIL_LIST;
> > +	default:
> > +		return -EINVAL;
> > +	}
> > +}
> > +
> >  static int ads1015_read_raw(struct iio_dev *indio_dev,
> >  			    struct iio_chan_spec const *chan, int *val,
> >  			    int *val2, long mask)
> > @@ -828,60 +881,20 @@ static const struct iio_buffer_setup_ops ads1015_buffer_setup_ops = {
> >  	.validate_scan_mask = &iio_validate_scan_mask_onehot,
> >  };
> >  
> > -static IIO_CONST_ATTR_NAMED(ads1015_scale_available, scale_available,
> > -	"3 2 1 0.5 0.25 0.125");
> > -static IIO_CONST_ATTR_NAMED(ads1115_scale_available, scale_available,
> > -	"0.1875 0.125 0.0625 0.03125 0.015625 0.007813");
> > -
> > -static IIO_CONST_ATTR_NAMED(ads1015_sampling_frequency_available,
> > -	sampling_frequency_available, "128 250 490 920 1600 2400 3300");
> > -static IIO_CONST_ATTR_NAMED(ads1115_sampling_frequency_available,
> > -	sampling_frequency_available, "8 16 32 64 128 250 475 860");
> > -
> > -static struct attribute *ads1015_attributes[] = {
> > -	&iio_const_attr_ads1015_scale_available.dev_attr.attr,
> > -	&iio_const_attr_ads1015_sampling_frequency_available.dev_attr.attr,
> > -	NULL,
> > -};
> > -
> > -static const struct attribute_group ads1015_attribute_group = {
> > -	.attrs = ads1015_attributes,
> > -};
> > -
> > -static struct attribute *ads1115_attributes[] = {
> > -	&iio_const_attr_ads1115_scale_available.dev_attr.attr,
> > -	&iio_const_attr_ads1115_sampling_frequency_available.dev_attr.attr,
> > -	NULL,
> > -};
> > -
> > -static const struct attribute_group ads1115_attribute_group = {
> > -	.attrs = ads1115_attributes,
> > -};
> > -
> >  static const struct iio_info ads1015_info = {
> > +	.read_avail	= ads1015_read_avail,
> >  	.read_raw	= ads1015_read_raw,
> >  	.write_raw	= ads1015_write_raw,
> >  	.read_event_value = ads1015_read_event,
> >  	.write_event_value = ads1015_write_event,
> >  	.read_event_config = ads1015_read_event_config,
> >  	.write_event_config = ads1015_write_event_config,
> > -	.attrs          = &ads1015_attribute_group,
> > -};
> > -
> > -static const struct iio_info ads1115_info = {
> > -	.read_raw	= ads1015_read_raw,
> > -	.write_raw	= ads1015_write_raw,
> > -	.read_event_value = ads1015_read_event,
> > -	.write_event_value = ads1015_write_event,
> > -	.read_event_config = ads1015_read_event_config,
> > -	.write_event_config = ads1015_write_event_config,
> > -	.attrs          = &ads1115_attribute_group,
> >  };
> >  
> >  static const struct iio_info tla2024_info = {
> > +	.read_avail	= ads1015_read_avail,
> >  	.read_raw	= ads1015_read_raw,
> >  	.write_raw	= ads1015_write_raw,
> > -	.attrs          = &ads1015_attribute_group,
> >  };
> >  
> >  static int ads1015_client_get_channels_config(struct i2c_client *client)
> > @@ -1128,14 +1141,20 @@ static const struct ads1015_chip_data ads1015_data = {
> >  	.num_channels	= ARRAY_SIZE(ads1015_channels),
> >  	.info		= &ads1015_info,
> >  	.data_rate	= ads1015_data_rate,
> > +	.data_rate_len	= ARRAY_SIZE(ads1015_data_rate),
> > +	.scale		= ads1015_scale,
> > +	.scale_len	= ARRAY_SIZE(ads1015_scale),
> >  	.has_comparator	= true,
> >  };
> >  
> >  static const struct ads1015_chip_data ads1115_data = {
> >  	.channels	= ads1115_channels,
> >  	.num_channels	= ARRAY_SIZE(ads1115_channels),
> > -	.info		= &ads1115_info,
> > +	.info		= &ads1015_info,
> >  	.data_rate	= ads1115_data_rate,
> > +	.data_rate_len	= ARRAY_SIZE(ads1115_data_rate),
> > +	.scale		= ads1115_scale,
> > +	.scale_len	= ARRAY_SIZE(ads1115_scale),
> >  	.has_comparator	= true,
> >  };
> >  
> > @@ -1144,6 +1163,9 @@ static const struct ads1015_chip_data tla2024_data = {
> >  	.num_channels	= ARRAY_SIZE(tla2024_channels),
> >  	.info		= &tla2024_info,
> >  	.data_rate	= ads1015_data_rate,
> > +	.data_rate_len	= ARRAY_SIZE(ads1015_data_rate),
> > +	.scale		= ads1015_scale,
> > +	.scale_len	= ARRAY_SIZE(ads1015_scale),
> >  	.has_comparator	= false,
> >  };
> >  
> > -- 
> > 2.35.1
> >   
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux